4. Considering the Typical Energy Balance for gasoline engine, @ atmospheric condition of 1.013 bar and 26°C with constant speed of 2800 rpm, intake air flow rate of 190 Kg/hr, and volumetric efficiency of 75%. If 16.61 KW of energy loss to surrounding was considered. Determine a. The amount of torque in Nm needed b. The mass flow rate of fuel in Kg/hr with calorific value of 45 400 KJ/Kg c. The volume displacement Note: Typical Full Load Energy Balance for Gasoline Engine based on 100% fuel input ЕСТВР -25% ELTCW -30% ELTEG -37% ELTS - 8%

4. Considering the Typical Energy Balance for gasoline engine, @ atmospheric condition of 1.013 bar and 26°C with constant speed of 2800 rpm, intake air flow rate of 190 Kg/hr, and volumetric efficiency of 75%. If 16.61 KW of energy loss to surrounding was considered. Determine a. The amount of torque in Nm needed b. The mass flow rate of fuel in Kg/hr with calorific value of 45 400 KJ/Kg c. The volume displacement Note: Typical Full Load Energy Balance for Gasoline Engine based on 100% fuel input ЕСТВР -25% ELTCW -30% ELTEG -37% ELTS - 8%

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The relative efficiency of a engine will be equal to it air standard efficiency & brake thermal efficiency of engine are 53.4% & 24,4% respectively.
5. An engine trom a quary vehicle used in the Buid a Beach program of DEMR has a power requirement of 560 kw. Per hour of its operation. it ejects 234 MJ into its suroundings at 50 °C. If it behaves like a Carnot engine, answer the questions below. a. How much work (MJ) s done by the engine per hour? b. What is the efficiency (%) of the engine? c. What is the temperature ("C) of the hot reservoir?
1. An engine from a quarry vehicle used in the Build a Beach program of DEMR has a power requirement of 560 kW. Per hour of its operation, it ejects 234 MJ into its surroundings at 50 °C. If it behaves like a Carnot engine, answer the questions below. A. How much work (MJ) is done by the engine per hour of operation? B. What is the efficiency (%) of the engine?C. What is the temperature (°C) of the hot reservoir? 2. Determine the entropy change (kJ/K) associated to the conversion of 10 kg of ice at -11 °C to steam at 121 °C. 3. Anna and Beth are using another rare metal, the nth metal (c = 0.600 J/g-℃), to build the 5-kg cuirass of their design. Initially, the metal is at 2250 K. It is then submerged to 10 kg of water at 15 °C. If the remaining liquid water after submerging the metal is 8.5 kg, solve for the net entropy change (kJ/K) of the system.
ler eniine of a light truck owned by a utility company has been converted to run on . A dry analysis of the engine exhaust gives the following volumetric percentages : CO,(4.90%) , COO.79%) , 05(2.45%) Calculate the equivalence ratio at which the engine is operating .
1. Two kilograms of air at a pressure of 2.25 MPa and temperature of 27C is heated atconstant volume to a final pressure of 2.5 MPa. Compute for the:a. Change in internal energyb. Change in enthalpyc. Change in entropyd. Heat transferrede. Non-flow work 2. In a constant pressure process, 325 KJ of heat are added to 6.55 kg of ideal gas(R=208 J/kg-K and k = 1.65) initially at 290 K. Calculate:a. Final Temperatureb. Change in enthalpyc. Change in internal energyd. Change in entropye. Non-flow work
1.5 Develop an expression for the thermal efficiency of the air-standard diesel cycle as a function of the compression ratio r. = V1N2 and the expansion ratio re = V4 / V3. Assume the working fluid is an ideal gas, and the volume effect of moles of gas %3D generated is small relative to the effect of heating from combustion.
(17 blanks) Calculate the efficiency of the Carnot Engine for ideal gas. Consider the figure below for a complete cycle of Carnot engine, where the cycle goes from ad->ab->bc->cd Carnot cycle Он TH Tc - V 02016 Pearson Education, Inc. processes: processes and segment ab & cd are the Where segments ad & bc are the and the volumes involved are Va, Vb, Vc, Vd, and the two temperatures TC and
Fuel and Combination Problem. Please solve ellaborately and include the Units. Your work will be appreciated much Dear.
Q.4:A) A single-stage reciprocating compressor takes Ikg/min at 1bar, 288K and delivers it at 5bar calculate the indicated power required and isothermal efficiency, assuming that the law of compression and expansion is PV = C and that the clearance is negligible. B) A certain natural gas has the following volumetric analysis: 60% CH4, 13% H2, 18% CO, 6% CO, and 3% O2. This gas is burned completely with the stoichiometric amount of dry air. Determine the theoretical the air-fuel ratio and the mole fraction of each products.
hi At the beginning of the compression process of an air standard Otto cycle, p1 = 1 bar, T1 = 300 K. The maximum temperature in the cycle is 2250 K and the compression ratio is 9.8. The engine has 4 cylinders and an engine displacement of Vd = 2.6 L. Determine per cylinder: Only letters d,e, and f needed a) the volume at state 1.b) the air mass per cycle.c) the heat addition per cycle, in kJ.d) the heat rejection per cycle, in kJ. - <e) the net work per cycle, in kJ. - <f) the thermal efficiency. - <
A diesel engine in a power plant has an output of 2000 KW at 1000 rpm. It uses fuel oil having a heating value of 42,000 KJ/kg. If the efficiency of the engine is 39.61%. Calculate the sp. gr. of the fuel used and the fuel consumption in barrels per month.
A duct With one intet and one exit is themally insulated. Air enters the duct at Steady state with 325°k i) 200 kPas and a mass flow rate of 0.S ka/sec. The inlet Cross-Sectional aread is le cm. At the exit, the air has the flow Opeed of 250 m/sec and the pressure of 100 kPa Assuming ideal gas with E Constant Cp l. 008 kJ/(kg. k) and neglečting potential ot energy effects , determine the exit Cross Sectional area in cm² using 5 Signi figant figures.