Type your question here An industrial undertaking has a connected load of 100 kW. The maximum demand is 80 kW. On anaverage, each machine works for 60 per cent time. Find the yearly expenditure on the electricity if thetariff isRs 10,000 + Rs 1000 per kW of maximum demand per year + Re 1 per kWh. 6. An industrial undertaking has a connected load of 100 kW. The maximum demand is 80 kW. On anaverage, each machine works for 60 per cent time. Find the yearly expenditure on the electricity if thetariff isRs 10,000 + Rs 1000 per kW of maximum demand per year + Re 1 per kWh.[Rs 615600]

given maximum demand of 80 kw and connected load of 100 kw and given that on average it has…

6. An industrial undertaking has a connected load of 100 kW. The maximum demand is 80 kW. On an average, each machine works for 60 per cent time. Find the yearly expenditure on the electricity if the tariff is Rs 10,000 + Rs 1000 per kW of maximum demand per year + Re 1 per kWh. [Rs 615600]

6. An industrial undertaking has a connected load of 100 kW. The maximum demand is 80 kW. On an average, each machine works for 60 per cent time. Find the yearly expenditure on the electricity if the tariff is Rs 10,000 + Rs 1000 per kW of maximum demand per year + Re 1 per kWh. [Rs 615600]

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter17: Resistive-inductive Series Circuits

Section: Chapter Questions

Problem 3RQ: 3. What is power factor?

See similar textbooks

Related questions

Q: Find the total annual charge on an installation costing Rs. 500,000 to buy and install, the…

A: Given, As scrap value is negligible so, Q = P ∵Q=P-scrap value Installation costing, P = Q =…

Q: Determine the heat of coal combustion per hour (kcal). 2. Determine the electrical energy…

A: Most of human energy requirement is meet by generating electrical energy. Once electrical energy is…

Q: In an industry the average electricity consumption is 5.8 lakhs kWh for the period, the average…

A: In this question we need to find a fixed electricity consumption for plant.

Q: 4. Daily load of an industry is 200 kW for first one hour, 150 kW for next seven hours, 50 kW for…

A: energy consumed = power * time in hours annual bill =cost on energy consumed plus cost on maximum…

Q: homeowner consumes 700 kWh in January. Determine the electricity bill for the month using the…

A: In the question, given homeowner consumes 700 kWh in January. Determine the electricity bill for…

Q: A 65000-kW thermal power station uses coal of calorific value 15000 kcal per kg. if the coal…

Q: 102 4032 Reguivalent 71002 20

A: Given circuit shown

Q: 1/A Hydroelectric Plant has a Turbine and Generator with an efficiency of 65%. If the dam has a Head…

A: Given data Turbine and Generator with an efficiency 65%. If the dam has a Head H= 70 feet and the…

Q: The number of units consumed in a year by a consumer with a yearly average load of 80 EW is ..

A: 1 unit = 1khw-hr Total Energy consumed in 1 year = 80Kw × 1year

Q: Daily load of an industry is 200 kW for first one hour, 150 kW for next seven hours, 50 kW for next…

A: Daily load: 200 KW for one hour 150 KW for 7 hours 50KW for 8 hours 1 KW for remaining hours…

Q: A thermal station has an efficiency of 15% and 0.9 kg of coal burnt for every kWh generated.…

A: Consider that 1 kWh is equal to 860 kCal

Q: QS// The power generauon equipment of a power station cust Rs 15.75.000 und hus a useful life of 25…

A: Consider the formula for the sinking fund method. q=P-Sr1+rn-1 Here, P is the initial amount, S is…

Q: environment each year. This company has committed to spending $2.3 billion in capital over the next…

Q: A hydro station has a water discharge of 550 cubic meter/hour. The head of the water in the dam is…

A: Electricity is generated using conventional and renewable energy resources like solar, hydro,…

Q: ssuming that the Philippines is consuming 3.5×10^20 kWh of electrical energy in one year and the…

A: Given data: Comsuming electricity =3.5 ×1020 kWh/year Conversion efficiency, ηconversion= 32%=0.32…

Q: The number of units consumed in a year by a consumer with a yearly average load of 50 kW is

A: In this answer let us try to find the number of units consumed when yearly average load is given as…

Q: 500 MW Medupi power station generates electricity using coals of calorific value of 4890 kcal/kg.…

A: Most of human energy requirement is met by generating electrical energy. Once electrical energy is…

Q: A power supplies 520 kW [note units] of power to a factory through wires with a transmission…

A: P1=520kW R=3 Ω a) So, P1=V12/R V12=P1*R=520*3=1560 V1=39.5 kV b) When power is transmitted at…

Q: consumer is using 250 units per month. If he is charged at a block rate tariff of 20 baisa for the…

Q: A wind turbine that is 80 meters tall with a blade length of 160 ft will be used to generate…

A: Most of human energy requirement is meet by generating electrical energy. Once electrical energy is…

Q: A small machine shop, with 30 hp of connected load, purchases electricity at the following monthly…

A: The given data from the question is depicted below: a) The 2800 kWh/month consumption, Monthly bill…

Q: Q5// The power generation equipment of a power station cust Rs 15,75,000 and has a useful life of 25…

A: Sinking fund method is used to determine the depreciation costGiven DataP = 1575000S = 75000Interese…

Q: 1. Power companies typically bill customers based on the number of kilowatt-hours sed during a…

A: A kilowatt is known as the power which is consumed by an electric appliance—it's 1,000 watts to be…

Q: A household load consumes 20 kWh of energy for 5 hours of continuous operation per day with a power…

Q: An industry daily load is 259 kW for first 2 hours, 103 kW for next 8 hours, 159kW for next 6 hours,…

A: Total expenditure per year = rate of maximum * maximum demand + Rate per KWH*Total units consumed in…

Q: The maximum demand of a consumer is 25 A at 220 V at 0.85 power factor leading. Total energy…

A: Given: The maximum demand is given as 25 A at 220 V at 0.85 power factor, The annual usage is 6500…

Q: The daily energy usage of a residential house for different loads used is as listed below: Type of…

A: i) load are given as

Q: A power supplies 520 kW [note units] of power to a factory through wires with a transmission…

A: We are authorized to answer three subparts at a time, since you have not mentioned which part you…

Q: The power company must generate 100 kW to supply an industrial load with 90 kW through…

Q: 4. A company currently uses a 75 hp motor with an efficiency of 92.25% running continuously at full…

A: We have to figure out the total cost of 75hp motor with an efficiency of 92.25% running at full…

Q: It is suggested, as an ECM, to replace a 7 kW motor with an efficiency of 87 % with a…

A: Given Power P = 7 Kw Efficiency of the motor = 87% Efficiency of premium motor =92% Cost of…

Q: c) A power plant delivers 100 MW from 6 am to 2 pm and 150 MW from 8 pm to 12 am. The power plant…

A: We are authorized to answer three subparts at a time, since you have not mentioned which part you…

Q: 2.A machine subjects its operators to 90 dBA when it is idle to 95 dBA when it is used at full…

A: The explanation is as follows.

Q: Determine the total energy consumption and cost of using the following appliances if the rate is…

Q: Type your question here A supply company offers the following alternative tariffs (i) Standing…

A: The solution can be achieved as follows.

Q: 1. A generating station has an overall efficiency of 15% and 0.75 kg of coal is burnt per kWh by the…

A: Let 'C' be the calorific value of fuel we know, Heat produced = weight × calorific…

Q: How many pounds of coal must be burned to keep one 100-watt light bulb lit for one hour? Assume the…

A: According to the question we have to find how many pounds of coal must be burned to keep one…

Q: plus 10 paise per kWh. (i) Find the annual bill and the overall cost per kWh if the load factor is…

A: In this question, we have to find annual bill and overall cost per KWh for different conditions of…

Q: A consumer has annual consumption 7,00,800 units. If his maximum demand is 200 kW. The load factor…

A: Given, A consumer has annual consumption 7,00,800 units. Maximum demand is 200 kW

Q: Type your question here A consumer requires one million units per year and his annual load factor is…

Q: he selected coal was tested and found to be able to produce heat of 67.4 MJ at a quantity of 2 kg.…

A: we need to determine the 1. calorific value of coal (kcal/kg) & the required heat of coal per…

Q: The capacity factor of a commercial PV generation facility is determined 0.486 over one-year period.…

A: The solution is given below

Q: Using THEVENIN'S OR NORTON'S THEOREM, determine the value of VTH (in volts). 40 40 SA 24V use two…

Q: An industrial facility operating 24 hours a day throughout the week consumes 2.8 million kWh of…

A: "Since you have asked for handwritten solution according to our guidelines we cannot provide…

Q: Assuming that the Philippines is consuming 3.5×10^20 kWh of electrical energy in one year and the…

A: Energy consumtion E =3.5×10^20 kWh/year The power plant has a conversion efficiency Ec =32%. The…

Q: A 100 MW combined-cycle plant with a heat rate of 7700 Btu/kWh operates with a 75% capacity factor.…

A: Note: As per the policy we can solve only 3 sub-parts of a question, please re-upload the remaining…

Q: A hydro station has a water discharge of 550 cubic meter/hour. The head of the water in the dam is…

A: Electricity is generated using conventional and renewable energy resources like solar, thermal,…

Q: An electric lift is required to raise a load of 5 tonne through a height of 30 m. One quarter of…

A: We have an electric lift with, load or mass (m) = 5 tonne Height (h) = 30 m Time taken = 27 Minutes…

Q: How much revenue can be generated in a year from a wind turbine if the power generated is sold at 25…

A: Given in the question: Velocity of wind = 11 m/sec Efficiency of turbine = 42% Mass flow rate = 2865…

Concept explainers

Compensation Techniques

The compensation techniques are the methods that are employed in the electrical control systems to enhance the performance of the system. The performance are generally affected by the factors like lag in the compensating devices, slow response of the system of the components like sensors used in the control system. The basic compensation technique involves lag compensation, lead compensation or the combination of the both.

Question

Type your question here An industrial undertaking has a connected load of 100 kW. The maximum demand is 80 kW. On an average, each machine works for 60 per cent time. Find the yearly expenditure on the electricity if the tariff is Rs 10,000 + Rs 1000 per kW of maximum demand per year + Re 1 per kWh.

6. An industrial undertaking has a connected load of 100 kW. The maximum demand is 80 kW. On an
average, each machine works for 60 per cent time. Find the yearly expenditure on the electricity if the
tariff is
Rs 10,000 + Rs 1000 per kW of maximum demand per year + Re 1 per kWh.
[Rs 615600]

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Compensation Techniques in Transmission Line

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Assume the maximum amount of power a plant can generate is 10,000 MW. For half the year it generates 8,990 MW of power, for a quarter of the year it generates 8,600 MW of power, for 15% of the year it generates 5,000 MW, and for 5% of the year it generates 2,500 MW. For the remainder of the year, the plant is not operating. What is the capacity factor of the plant for the year?
a) Explain briefly how electricity can be sold to a grid by use solar energy. b) Wind farm consist of ten wind turbines with nominal capacity of 2MWper turbine, has a total of 20 MW for farm as a whole, in year 2020, the farm produced a total energy 43416MWH, find a capacity factor.
A generating plant has a maximum capacity of 100 kW and costs Rs 2,000,000.The annual fixed charges are 12% consisting of 6% interest, 4% depreciation and 2% taxes. Find the fixed charges per kWh if the load factor is (i) 1o0% and (ii) 60%.
A primary feeder has 3200kW an annual peak load input and at the time of peak load it has a total copper loss 150kW. The total annual energy supplied to the feeder is 7.5 x 106 kWh. Determine the following: 1) The annual loss factor 2) The total annual copper loss energy 3) The cost of total annual copper at BD 0.05/kWh.
shown in the below figure. The reserve capacity in the plant at 70% capacity factor is bne MW4 90 50 puig 7.2 lust % Time 100 500 0 (а) zero (b) 10 MW (d) 50 MW (c) 30 MW
11.A resistor connected across an AC supply of 220 V. The power drawn is 1000 watts, if the diode was connected in series with the resistor, what would be the power absorbed by the resistor? 12.Rocks that are rich in metals are known as 13.A uniform volume charge density of 80 µC/m3 is present throughout the region 8mm
A generating plant has a maximum capacity of 100 kW and costs Rs 1,60,000. The annual fixed charges are 12 %. If the load factor is 50 %, the fixed charges per kWh will be ?
A mini-hydroelectric power plant is under a head of 275 feet. The turbine efficiency is 0.85 and the generator efficiency is 0.80. If the turbine speed is limited to 450 rpm, calculate the generator kW output.
2- In a PWM, given that the duty cycle is 80% what is the voltage output?
Explain the prime mover in diesel plant and it's energy conversion
3. What is power factor?
A power station has a maximum demand of 15000 kW. The annual load factor is 50% and plant capacity factor is 40%. What is the reserve capacity of the plant?