A fan is used to blow air (density=1.15 kg/m3) in a duct. A pitot tube is placed in the duct as shown. The static pressure in the duct is measured with a wall tap and pressure gage. Use the gage readings to determine the velocity of the air. note: Pitot tube is used to measure the air total pressure. Mind on the head to be calculated if it is already in air.

A fan is used to blow air (density=1.15 kg/m3) in a duct. A pitot tube is placed in the duct as shown. The static pressure in the duct is measured with a wall tap and pressure gage. Use the gage readings to determine the velocity of the air. note: Pitot tube is used to measure the air total pressure. Mind on the head to be calculated if it is already in air.

Name: A fan is used to blow air (density=1.15 kg/m3) in a duct. A pitot tub
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A fan is used to blow air (density=1.15 kg/m3) in a duct. A pitot tube is placed in the duct as shown. The static pressure in the duct ismeasured with a walltap and pressure gage. Use the gage readings to determine the velocity of the air.note: Pito

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

1. Solve the following and draw the figures Í. A 30 cm x 15 cm venturimeter is inserted in a vertical pipe carrying water, flowing in the upward direction. A differential mercury manometer connected to the inlet and throat gives a reading of 30 cm. Find the [Ans. 154.02 lit/s] ii. If in the problem 13, instead of water, oil of sp. gr. 0.8 is flowing through the venturimeter, determine the [Ans. 173.56 lit/s] III. The water is flowing through a pipe of diameter 30 cm. The pipe is inclined and a venturimeter is inserted in the pipe. The diameter of venturimeter at throat is 15 cm. The difference of pressure between the inlet and throat of the venturimeter is measured by a liquid of sp. gr. 0.8 in an inverted U-tube which gives a reading of 40 cm. The loss of head between the inlet and throat is 0.3 times the kinetic head of the pipe. [Ans. 22.64 lit./s] discharge. Take Ca = 0.98. rate of flow of oil in litres/s. Find the discharge.
Toplam basınç göstergesi Manometre Vana Venturimetre Debiölçer Hazne Pompa Manometre=Manometer Ventwrimete-Venturimeter. Debiölcer-Flow meter Vana=Valve Pompa=Pump Hazne=Tank Toplam Basınç Göstergesi =Total Pressure Gauge Explain how you can measure the massand volumetric flew of the flow in the rire circuit in the figure.
The bore and stroke of an air compressor are 276mm and 164mm, respectively. If the piston displacement is 0.049m3/sec, what is the operating speed of the compressor?
2. The initial condition of air in an air compressor is 99 kPa and 30 deg. C and discharges at 438 kPa. The bore and stroke are 374 mm and 395 mm, respectively. The percent clearance of 11 % running at 356 rpm. Find the volume of air at suction in m^3/s ANswer in one decimal places
B1. A water with viscosity 11.4x10-3 poise is flowing through a pipe of diameter 300 mm at the rate of 500 litres per sec. Find the Reynold's Number & the head lost due to friction in the pipe of length 1 km. (Enter only the values by referring the unit given. Also upload the hand written answers in the link provided) The velocity of flow of water (in m/s) is The value of Reynold's Number is The frictional loss in the pipe (in m) is
In shut off valve experiment, the 3/ 6th of valve position, the discharge is found as of 6 lit/s for the 27mm diameter pipe. Find the velocity and Reynolds number of the flow. Take the viscosity of water as 1.14x10 Ns/m?. (Enter only the value in the box by considering the unit given in bracket. Do not write the unit in the boxes) Velocity of water (unit in mm/s) = Reynold's number
Water at 83 L/sec is flowing inside a 6-inch schedule 40 nominal pipe. Determine the following.a) What is the Reynold’s number of the water?b) What is the maximum velocity in ft/sec of the water at room temperature in the pipe?c) What is the pressure drop reading in mmHg of a pitot tube inserted in the pipe? (The fluid inside the pitot tube is mercury.) Assume a viscosity of 0.001 Pa*s and density of 1000 kg/m3.
1. Atmospheric pressure is about 80 kPa (absolute). Water pressure at the base of a water tower is 600 kPa (gauge). Determine the following: Gauge pressure at the base of the tower Absolute pressure at the base of the tower A pipe carries water at a flow rate of 90 L/s. Determine the minimum inside diameter so that the average velocity of the fluid does not exceed: 3 m/s 2 m/s 4 m/s A 20 mm diameter copper pipe (19.94 mm inside diameter) carries water at a flow rate of 40 L/s. Determine the average velocity of the fluid.
The bore and stroke of an air compressor are 276mm and 164mm, respectively. If the piston displacement is 0.049m3/sec, what is the operating speed of the compressor? complete soln tnx.
A pitot-static probe is used to determine the flow velocity of air at 20°C by using water manometer as shown in Figure 5. If the vertical difference of both arms in the manometer is 6 cm. Find, i. pitot formula to obtain the flow velocity ii. the pressure difference inside the system, and iii. air velocity inside the system. Air Pitot 6 cm tube Manometer Figure 5
Toplam basınç göstergesi Manometre Vana Venturimetre Debiölçer Hazne Pompa Manometre=Manometer Venturimetre=Venturimeter Debiölser-Flaw meter Vana=Valve Pompa=Pump Hazne=Tank Toplam Basınç Göstergesi =Total Pressure Gauge It is desired to display the flow in the venturimeter, How can you determine this? Explain bY. explaining the method vou bave chosen.
Question 29 Not yet answered Marked out of 2.00 P Flag question Find the head lost due to friction in a pipe of diameter 5 m and length 5000 cm, through which a liquid of density 900 kg/m is flowing at a velocity of 3 m/s. Use Darcy formula and assume the viscosity of the liquid is 400 poise. B. Write your answer here Reynolds number (Re) = coefficient of friction (f)= Head lost due to friction (h,) =