A proctor compaction test in the laboratory on a borrow pit soil gives maximum unit weight of 19 kN/m3 and optimum water content of 11.5%. The bulk unit weight and water content of the soil in the borrow pit are 17.2 kN/m3 and 8.2%, respectively. A highway fill is to be constructed using this soil. The specifications require the fill to be compacted to 95% Proctor compaction. (a) What is the additional weight of water per unit volume required to bring the moisture content to the optimum value to achieve 95% Proctor compaction? (b) How many truckloads of borrow pit soil will be required for a 100,000 m3 highway embankment - assuming each truck has a capacity of 10 m3 ?

A proctor compaction test in the laboratory on a borrow pit soil gives maximum unit weight of 19 kN/m3 and optimum water content of 11.5%. The bulk unit weight and water content of the soil in the borrow pit are 17.2 kN/m3 and 8.2%, respectively. A highway fill is to be constructed using this soil. The specifications require the fill to be compacted to 95% Proctor compaction. (a) What is the additional weight of water per unit volume required to bring the moisture content to the optimum value to achieve 95% Proctor compaction? (b) How many truckloads of borrow pit soil will be required for a 100,000 m3 highway embankment - assuming each truck has a capacity of 10 m3 ?

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter4: Plasticity And Structure Of Soil

Section: Chapter Questions

Problem 4.9P

See similar textbooks

Similar questions

A field density test has been conducted in a compacted fill that is currently under construction.The test results indicate a relative compaction of 101-103%, which made the constructionmanager believe the test must be incorrect. He believes it is impossible for the dry unit weightinthe field to be greater than the maximum dry unit weight from the Proctor compaction test.Explain why the relative compaction in the field could indeedbe greater than 100%.
A compacted fill, currently under construction, will support a proposed supermarket. One of the field density tests in this fill gave a unit weight of 121 lb/ft³ and a moisture content of 12.5%. A series of modified Proctor tests have also been performed on the fill soils per ASTM D1557, and they gave a maximum dry unit weight of 117 lb/ft³ and an optimum moisture content of 13.0%. Compute the relative compaction based on the modified Proctor test and determine whether or not it satisfies the normal compaction specification for such a project.
4. Phase Diagram A soil sample was obtained at the underground parking garage that Dr. Barry is constructing at his home with a volume (VT) of 0.05 ft', total weight (WT) of 4.2 lbs, weight of water (Ww) of 0.37 lbs and a specific gravity (Gs) 2.70. Draw a complete phase diagram and determine the void ratio (e), moist unit weight (y), saturated unit weight (ysat), dry unit weight (Yary), weight of the solids (W.), volume occupied by the solids (V.), volume occupied by the water (V), volume occupied by the air (VA). volume of the voids (Vv), porosity (n), moisture content (w), and percent saturation (S). Use English units in your solution. Show all of your work.
A field permeability test indicates that the coefficient of permeability for a certain soil is 2 * 10-2 mm>sec. Is this a relatively high or low coefficient of permeability? What type of soil would this probably be?
A soil sample was taken from a proposed cut area in a highway construction project and sent to a soils laboratory for a compaction test, using the Standard Proctor compaction procedure. Results of the test are as follows: Maximum dry unit weight = 112.6 lb/ft3 %3D Optimum moisture content = 15.5% The contractor, during construction of the soil em-bankment, achieved the following: Dry unit weight reached by field compaction = 107.1 Ib/ft3 Actual water content 16.0% %3D Determine the percent compaction achieved by the contractor.
A soil sample was taken from a proposed embankment that is to be used as compacted fill for a building foundation. The sample was sent to a soil laboratory for a compaction test. Standard Proctor Method B was performed and the results showed maximum dry unit weight of 19.45 kN/m³ and optimum moisture content is 12.6%. During placement, the contractor had a field compaction test performed and the field test results were in-place dry unit weight of 18.65 kN/m3 and moisture content 11.6%. Required Determine the percent compaction achieved by the contractor, the the nearest 10th of a percent.
Standard proctor compaction test results on a sandy clay (35% sand, 55% clay, and 10% silt), taken from a borrow pit, are given in the following table. The sandy clay in the borrow pit has a porosity of 65% and a water content of 5.2%. A highway embankment is to be constructed using this soil. (a) Specify the compaction (dry unit weight and water content) to be achieved in the field. Justify your specification. (b) How many cubic meters of borrow pit soil are needed for 1 cubic meter of highway fill? (c) How much water per unit volume is required to meet the specification? (d) How many truckloads of soil will be required for a 100,000 m3 highway embankment? Each truck has a load capacity of 22.5 m3 and regulations required a maximum load capacity of 90%. (e) Determine the cost for 100,000 m3 of compacted soil based on the following: Purchase and load borrow pit material at site, haul 2 km round-trip, and spread with 200 HP dozer = $15/m3; extra mileage charge for each km =…
Can I get a step by step for this question? A loose, uncompacted sand fill 6-ft in depth has a relative density of 40%. Laboratory tests indicated that the maximum and minimum void of the ratios of the fill material are 0.9 and 0.46, respectively. The specific gravity of solids of the soil is 2.65. If the final height of the fill after compaction is 5.4 ft, the relative density of the compacted fill is most nearly?
Dynamic loading, Vibro static test, Standard proctor and modified proctor are tests to determine soil compaction characteristics. Is it true ?
For a given sieve analysis: No.4 - % finer is 94, for No 200 - %finer 3. Cu=4.48 Cc=1.22. Classify the soil using USCS. Justify your answer.
A hydrometer test was conducted on the material passing sieve No, 200 and the results are listed in the table below, The results of sieve analysis on the soil showed that the percentage passing No. 4 was 90 % and that passing No. 200 was 20 %. Estimate the clay size fraction in the soil. Table : Results of hydrometer test diameter (mm) 0.0700 0.0400 0.0150 0.0020 % finer (combined) 19 finer 95 80 16 65 13 45 0.0010 30 6 Select one:
In soil compaction test, if a test result exceeds 100%, should engineers accept the result?