A stadium for sporting events is constructed with a partial roof covering the seating arrangements. One of the many supports for the roof is shown in the figure below. The structure is rigidly fixed to the ground at point A The vertical portion AB is H = 40 m long, the inclined portion BCD makes an angle of 0 = 50° from the horizontal, and the horizontal distance from point B to point D is L = 35 m. The applied loads can be modeled as a single concentrated force of F = 65 kN at point C, which lies midway between points B and D. Also, the force Facts perpendicular to section BCD. Neglect the weight and thickness of the structure for this analysis. Determine all support reactions at point A. Note: Express your answers following the standard sign convention for the coordinate system shown. Ax = A₁ = MRA = y H B number (rtol=0.01, atol=1e-05) number (rtol=0.01, atol=1e-05) number (rtol=0.01, atol=1e-05) C L kN kN kN - m

A stadium for sporting events is constructed with a partial roof covering the seating arrangements. One of the many supports for the roof is shown in the figure below. The structure is rigidly fixed to the ground at point A The vertical portion AB is H = 40 m long, the inclined portion BCD makes an angle of 0 = 50° from the horizontal, and the horizontal distance from point B to point D is L = 35 m. The applied loads can be modeled as a single concentrated force of F = 65 kN at point C, which lies midway between points B and D. Also, the force Facts perpendicular to section BCD. Neglect the weight and thickness of the structure for this analysis. Determine all support reactions at point A. Note: Express your answers following the standard sign convention for the coordinate system shown. Ax = A₁ = MRA = y H B number (rtol=0.01, atol=1e-05) number (rtol=0.01, atol=1e-05) number (rtol=0.01, atol=1e-05) C L kN kN kN - m

Name: please help solve and explain A stadium for sporting events is constru
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: please help solve and explain A stadium for sporting events is constructed with a partial roof covering the seating arrangements. One of themany supports for the roof is shown in the figure below. The structure is rigidly fixed to the ground at point

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter1: Tension, Compression, And Shear

Section: Chapter Questions

Problem 1.10.13P: A large precast concrete panel for a warehouse is raised using two sets of cables at two lift lines,...

See similar textbooks

Similar questions

A large precast concrete panel for a warehouse is raised using two sets of cables at two lift lines, as shown in the figure part a. Cable 1 has a length L1 = 22 Ft, cable 2 has a length L2= 10 ft, and the distance along the panel between lift points Band D is d = 14 ft (see figure part b). The total weight of the panel is W = 85 kips. Assuming the cable lift Forces F at each lift line are about equal, use the simplified model of one half of the panel in figure part b to perform your analysis for the lift position shown. Find the required cross-sectional area AC of the cable if its breaking stress is 91 ksi and a factor of safety of 4 with respect to failure is desired.
A cylindrical brick chimney of height H weighs w = 825 lb/ft of height (see figure). The inner and outer diameters are d1= 3 ft and d2= 4 ft, respectively. The wind pressure against the side of the chimney is p = 10 lb/ft2 of projected area. Determine the maximum height H if there is to be no tension in the brickwork.
A plane Frame is restrained at joints A and D, as shown in the figure. Members AB and BCD are pin connected at B. A triangularly distributed lateral load with peak intensity of SO N/m acts on CD. An inclined concentrated force of 200 N acts at the mid-span of BC. (a) Find reactions at supports A and D. (b) Find resultant forces in the pins at B and C.
.15 A hitch-mounted bicycle rack is designed to carry up to four 30-lb bikes mounted on and strapped to two arms Gil (sec bike loads in the figure part a) The rack is attached to the vehicle at A and is assumed to be like a cant silkier beam A BCDGII (figure part b) The light of fixed segment AB is U = 10 lb. centered 9 in. from A (see figure part b) and the rest of the rack highs W2 = 40 lb. centered 19 in. from A. Segment ABCDG is a steel tube o(2 X 2 in. with a thickness I = 118 in. Segment BCDGII pivots about a bolt at B with a diameter d1 = 0.25 in. to allow access to the rear of the vehicle without removing the hitch rack. When in use, the rack is secured in an upright posit ion by a pin C(diameter o( pin d, = 5116 in.) (see phoo and figure part C). The of returning effect of the bikes on the rack is resisted by a force couple F h at BC. (a) Find the support reactions at A for the fully loaded rack. (b) Find forces in the bolt at B and the pin at C. (c) Find average shear stresses in both the bolt at Band the pin at C. (d) Find average bearing stresses o, in the bolt at B and the pin at C.
A soccer goal is subjected to gravity loads (in the - z direction, w = 73 N/m for DG, BG, and BC; w = 29 N/m for all other members; see figure) and a force F = 200 N applied eccentrically at the mid-height of member DG. Find reactions at sup ports C, D, and H.
Bent rod ABC is supported by a pin and bracket at A and a cable at C to D. The weight of the bent rod is 7.00 N/m and triangular distributed load is applied from point B to C as shown 1-2: See questions in image 3. What approximates the tension force? 4. What is the magnitude of the resultant of the triangular distributed load, F_BC, and its location d?
The prismatic bar AC is supported by a hinge at C and cable ADB that runs through a frictionless pulley at D as shown in the figure. What is the tension in the cable if the bar weighs 5 Ib/ft? D 3 ft 5 ft B 5 ft
we want to build a single-rail overhead crane in the workshop.when the load reaches the extreme point, it is 1800 mm away. the rail-shaped profile iron of the crane is connected from point B to point A by rope.the tensile stress of the rope is = 600 mpa. and the cross-sectional area is a=802 mm.according to other dimensions given (a=850mm b=1500 mm), this vince can hang No more than how many kg of load.(G=?)
The Straw Hat crew on their journey to Laugh Tale Island found a big treasure box (W). Luffy wanted to place the treasure box (W) as shown in the figure. A 100-mm x 300 mm rectangular beam is supported in a horizontal position. At point "A", it is being held by a pin and at "B" by a cable BD inclined 3 vertical to 4 horizontal. Assume all forces are applied to the beam along its central axis. Given that Fcparallel to grain = 10.50 MPa, W = 79 kN and E = 13800 MPa. Neglecting the weight of the beam and cable, determine whether the design is safe. Cable 2.4 m 2.4 m
The cantilever truss in the figure is hinged at D and E. Find the force in member BC. 1000 1b 60 60° 30 C 3. lo
A long retaining wall is braced by wood shores set at an angle of 308 and supported by concrete thrust blocks, as shown in the first part of thefigure. The shores are evenly spaced at 3 m apart. For analysis purposes, the wall and shores are idealized as shown in the second part of the figure.Note that the base of the wall and both ends of the shores are assumed to be pinned. The pressure of the soil against the wall is assumed to be triangularly distributed, and the resultant force acting on a 3-meter length of the walls is F =190 kN. If each shore has a 150 mm 3150 mm square cross section, what is the compressive stress σc in the shores?
A new art exhibit featuring mobile works is going up in the Norwalk, CA area. One art work is shown in the figure below. A 105 N uniform beam is pinned to the ground by a pivot. The beam is supported by a cable (attached 3/5 from the bottom of the beam) to allow for each of the shoes to hang freely. Each individual shoe has a weight of 7.5 N. 10 WALL FLOR (a) ( If one shoe is attached 1/7 of the way up the beam and another shoe is attached 5/8 of the way up the beam, with e, = 70.1° and e, 30.1°, what is the tension in the cable, in newtons? %3! %3D (b) What is the x-component of the force, in newtons, that the pivot exerts on the bottom of the beam? (c) O What is the y-component of the force, in newtons, that the pivot exerts on the bottom of the beam?