A steel rod with cross-sectional area 1.00 × 10^(−5) m^2 is fixed on one end and pulled by Superman at the other end with a force of 5.00 × 10^3 N. What is the amount of tensile strain experienced by the steel rod, if its Young’s modulus is 2.00 × 10^(11) Pa?

A steel rod with cross-sectional area 1.00 × 10^(−5) m^2 is fixed on one end and pulled by Superman at the other end with a force of 5.00 × 10^3 N. What is the amount of tensile strain experienced by the steel rod, if its Young’s modulus is 2.00 × 10^(11) Pa?

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter14: Static Equilibrium, Elasticity, And Fracture

Section: Chapter Questions

Problem 50PQ

See similar textbooks

Related questions

Q: A cable is 100 m long, has a cross-sectional area of 1.0 mm2, and is made of a material having a…

A: Scenario - A block is hanging from end of a cable. It causes the cable to stretch due to its weight.…

Q: By what amount does the nylon stretch?

Q: An ACL has an unloaded length of 3.8 cm and is subject to a tension stress that results in a 5%…

A: Given,

Q: Consider a copper wire with cross-sectional area 4 mm?. The Young's modulus for copper is 1.1 × 1011…

Q: Consider a rod, when applied with a certain force, reverts to its original form. With stress given…

A: Given data: Stress (σ) = 3.0 GPa Strain (ε) = 0.230 Required: Young’s modulus (Y)

Q: The figure represents an insect caught at the midpoint of a spider-web thread. The thread breaks…

A: Given,breaking stress of the string, 9.2 ×108 N/m2strain, 2.00lengthh of the thread, L = 3.0 cmcross…

Q: 200 150 100 -- Material X 50 Material Y • Muterial Z 0.000 0.005 0.010 0015 0.020 0.025 Strain (e)…

A: young's modulus of material y=stressstrainy=(150-15)MPa0.02-0.001y =1350.019y = 7105.26 MPa7105.26

Q: A solid copper cube has an edge length of 88.3 cm. How much stress must be applied to the cube to…

A: Original length (L) = 88.3 cm New length (L') = 88 cm

Q: A solid copper cube has an edge length of 89.6 cm. How much stress must be applied to the cube to…

Q: A solid copper cube has an edge length of 89.3 cm. How much stress must be applied to the cube to…

Q: A solid copper cube has an edge length of 86.9 cm. How much stress must be applied to the cube to…

Q: Calculate the strain of a brass rod of length 250 mm which is subjected to a tensile load of 50 kN…

A: Length , L = 250 mm Elongation , ∆L = 0.2 mm Load , F = 50 kN To find = Strain

Q: A solid copper cube has an edge length of 86.9 cm. How much stress must be applied to the cube to…

A: Write the given values with the suitable variables. L1=86.9 cmL2=86 cmk=1.4×1011 N/m2 Here, L2, L1,…

Q: Due to loading, a line segment has length 2 m with consta normal strain 0.25. What is the original…

Q: A solid copper cube has an edge length of 89.9 cm. How much stress must be applied to the cube to…

A: The ratio of volumetric stress with volumetric strain is defined as the bulk modulus. To solve the…

Q: A solid copper cube has an edge length of 81.6 cm. How much stress must be applied to the cube to…

A: Given: L=81.6 cmL'=81.0 cmB=1.4*1011 N/m2

Q: A solid copper cube has an edge length of 85.9 cm. How much stress must be applied to the cube to…

A: Given: length of cube l = 85.9 cmfinal length =86cmchange in length ∆l = 86-85.9 = 0.1 cmBulk…

Q: Find the minimum diameter of a (50 m)- long nylon string that will stretch no more than (1 cm) when…

Q: When using a pencil eraser, you exert a downward force of 5.5 N at a distance of 1.9 cm from the…

Q: solid copper cube has an edge length of 81.3 cm. How much stress must be applied to the cube to…

A: Given Initial length l1 = 81.3 cm = 0.813 m Final length l2 = 81 cm = 0.81 m Bulk modulus B =…

Q: A solid copper cube has an edge length of 88.9 cm. How much stress must be applied to the cube to…

Q: Consider a rod, when applied with a certain force, reverts to its original form. With stress given…

A: Given: Stress=3.0 GPa Strain= 0.230 Required: Young modulus=?

Q: A material is made in circular rod form of diameter 0.6 cm and 10 cm long . It is fixed on the…

A: Dear student The strain is defined as Change in length per unit original Length. Strain = ∆L/L

Q: The young's modulus of a material whose elastic strain and stress are 0.41 and 355.53 N/m?…

Q: Young's modulus of iron rod is 21 x 1010 N/m?. A force of 7.0 x 105 N is applied to a 1.5-m length…

A: Given data as per question Young modulus = 21*1010 Force = 7*105 A = 0.25

Q: Young's modulus of iron rod is 21 x 1010 N/m². A force of 7.0 × 105 N is applied to a 1.5-m length…

Q: Q2.8/ If the tensile stresses generated in a copper rod after the influence of external forces (ot…

A: Given data: The tensile stress in the material is σt=2158.2104 N/m2. The longitudinal strain is…

Q: A cylindrical specimen of a iron with a Young's modulus of 220 GPa has an original length of 220 mm…

Q: A solid copper cube has an edge length of 89.6 cm. How much stress must be applied to the cube to…

Q: Assume a person's mass is 62.0 kg and each of her shoes has an area of 220 cm?. F What is the…

Q: A solid copper cube has an edge length of 81.9 cm. How much stress must be applied to the cube to…

A: Given Initial length l1 = 81.9 cm = 0.819 m Final length l2 = 81 cm = 0.81 m Bulk modulus B =…

Q: A steel wire having a radius of 2.0 mm, carrying a load of 4 kg, is hanging from a ceiling. Given…

Q: A 1.0 x 10-3 kg spider is hanging vertically by a thread that has a Young’s modulus of 4.5 x 109 N/m…

Q: The young's modulus of a material whose elastic strain and stress are 0.33 and 145.23 N/m?…

A: Given information: The strain in a material is, ε=0.33 The stress inside the material is, σ=145.23…

Q: A solid copper cube has an edge length of 89.6 cm. How much stress must be applied to the cube to…

A: The stress that must be applied to the cube is 2.726 x 109 N/m2

Q: A solid copper cube has an edge length of 93.8 cm. How much stress must be applied to the cube to…

A: Given Initial length of the copper cube is li=93.8 cm=0.938 m Final length of the copper cube is…

Q: The face of an aluminum plate, which is fixed in place, measures 90 cm by 90 cm. The thickness of…

Q: Find the elongation of a steel rod of 100 mm long when it is subjected to a tensile strain of 0.004?…

A: (b) 0.4 mm

Q: 1. the base of an aluminum block which is fixed in place measures 90cm x 90cm. and the height of the…

A: The shear modulus is expressed mathematically as shear modulus (G) = (shear stress)(shear strain)=…

Q: A solid copper cube has an edge length of 89.8 cm. How much stress must be applied to the cube to…

Q: A solid copper cube has an edge length of 85.3 cm. Ho w much st The bulk modulus of copper is 1.4x…

A: givenLi=85.3 cmLf=85 cmK=1.4×1011 N/m2

Q: A solid copper cube has an edge length of 88.3 cm. How much stress must be applied to the cube to…

Q: Consider a rod, when applied with a certain force, reverts to its original form. With stress given…

Q: A solid copper cube has an edge length of 89.5 cm. How much stress must be applied to the cube to…

Q: A solid copper cube has an edge length of 87.9 cm. How much stress must be applied to the cube to…

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Similar questions

A steel cable 2.00 m in length and with cross-sectional radius 0.350 mm is used to suspend from the ceiling a 10.0-kg model aircraft that is flying in a horizontal circle with an angular speed of 6.00 rad/s. What is the strain produced in the cable?
Consider a nanotube with a Youngs modulus of 2.130 1012 N/m2 that experiences a tensile stress of 5.3 1010 N/m2. Steel has a Youngs modulus of about 2.000 1011 Pa. How much stress would cause a piece of steel to experience the same strain as the nanotube?
A horizontal, rigid bar of negligible weight is fixed against a vertical wall at one end and supported by a vertical string at the other end. The bar has a length of 50.0 cm and is used to support a hanging block of weight 400.0 N from a point 30.0 cm from the wall as shown in Figure P14.81. The string is made from a material with a tensile strength of 1.2 108 N/m2. Determine the largest diameter of the string for which it would still break. FIGURE P14.81
An aluminium (=2.7g/cm3) wire is suspended from the ceiling and hangs vertically. How long must the wire be before the stress at its upper end reaches the proportionality limit, which is 8.0107N/m2 ?
A brass wire and a steel wire, both of the same length, are extended by 1.0 mm under the same force. Is the cross-sectional radius of the brass wire more, less, or equal to the cross-sectional radius of the steel wire? Explain. Youngs moduli for brass and steel are 1.0 1010 N/m2 and 2.0 1011 N/m2, respectively.
In Example 14.3, we found that one of the steel cables supporting an airplane at the Udvar-Hazy Center was under a tension of 9.30 103 N. Assume the cable has a diameter of 2.30 era and an initial length of 8.00 m before the plane is suspended on the cable. How much longer is the cable when the plane is suspended on it?
What Is Static Equilibrium? Problems 13 are grouped. 1. C A ball is attached to a strong, lightweight rod (Fig. P14.1). The rod is supported by a horizontal pin near the top. The ball is at rest. Is the ball in static equilibrium? If not, why not? If so, which type of equilibrium is itstable, unstable, or neutral? Hint: What would happen if you displaced the ball slightly? FIGURE P14.1
A bridge of length 50.0 m and mass 8.00 104 kg is supported on a smooth pier at each end as shown in Figure P12.25. A truck of mass 3.00 104 kg is located 15.0 m from one end. What are the forces on the bridge at the points of support? Figure P12.25
Problems 33 and 34 are paired. One end of a uniform beam that weighs 2.80 102 N is attached to a wall with a hinge pin. The other end is supported by a cable making the angles shown in Figure P14.33. Find the tension in the cable. FIGURE P14.33 Problems 33 and 34.
(a) When water freezes, its volume increases by 9.05% (that is, V/V0=9.05102 ). What force per unit area is water capable of exerting on a container when it freezes? (It is acceptable to use the bulk modulus of water in this problem.) (b) Is it surprising that such forces can fracture engine blocks, boulders, and the like?
Two rods, one made of copper and the other of steel, have the same dimensions. If the copper rod stretches by 0.15mm under some stress, how much does the steel rod stretch under the same stress?
A uniform sign of weight Fg and width 2L hangs from a light, horizontal beam hinged at the wall and supported by a cable (Fig. P12.31). Determine (a) the tension in the cable and (b) the components of the reaction force exerted by the wall on the beam in terms of Fg, d, L, and . Figure P12.31