A wire of uniform cross sectional area of 0.25 mm2 is stretched at both ends by a total force of 65 N and the strain produced by the wire is 2 x 10-2 m. Calculate the Young modulus of the material of the wire.

A wire of uniform cross sectional area of 0.25 mm2 is stretched at both ends by a total force of 65 N and the strain produced by the wire is 2 x 10-2 m. Calculate the Young modulus of the material of the wire.

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter14: Static Equilibrium, Elasticity, And Fracture

Section: Chapter Questions

Problem 66PQ: A steel cable 2.00 m in length and with cross-sectional radius 0.350 mm is used to suspend from the...

See similar textbooks

Related questions

Q: A steel cube of side length L = 0.5 m is subjected to a shearing force of 5000 N along the top…

A: Length=0.5m Shear force=5000N Shear constant=8.3×10^10N/m2 Shearing angle=?

Q: True or False: A cylindrical rod with a cross sectional area of 0.1 m^2 which is subjected to a…

Q: A 200.- kg load is hung on a wire of length 4.00 m, crosssectional area 0.200 x 10-4 m2, and Young’s…

A: Write the expression for the increase in length.

Q: Normal forces of magnitude 1.0 × 106 N are applied uniformly to a spherical surface enclosing a…

Q: A 0.800 m-long metal wire has a circular cross section of diameter 0.900 mm. One end of the wire is…

A: Given that, Length of the wire(L)= 0.8 m Diameter (d)= 0.9× 10-³ m So, radius (r)= (0.9×10-³)/2=…

Q: Consider a rod, when applied with a certain force, reverts to its original form. With stress given…

A: Given data: Stress (σ) = 3.0 GPa Strain (ε) = 0.230 Required: Young’s modulus (Y)

Q: In the Challenger Deep of the Marianas Trench, the depth of seawater is 10.9 km and the pressure is…

Q: What is the pressure required to reduce the volume of a brass block by 10%?[Given the Bulk Modulus…

A: To solve the question we will use the formula: Bulk modulus, k=PdVV

Q: Calculate the strain of a brass rod of length 250 mm which is subjected to a tensile load of 50 kN…

A: Length , L = 250 mm Elongation , ∆L = 0.2 mm Load , F = 50 kN To find = Strain

Q: A metal wire 1.0 mm in diameter and 2.0 m long hangs vertically with a 6 kg mass suspended from it.…

Q: A tangential force of 0.004 KN affected the upper surface of a rectangle 5 mm high, 3 cm long and 5…

A: Given Dimensions, l=3 cm= 3×10-2mw=5 cm=5×10-2mh=5mm=5×10-3m Tangential force, F=0.004 KN= 4N…

Q: A 15 cm long animal tendon ( وتر ) was found to stretch 3.7 mm by a force of 13.4 N. The tendon was…

A: Given: length of animal lo=15 cm =150 mm force F=13.4 N Diameter=D =…

Q: Find the minimum diameter of a (50 m)-long nylon string that will stretch no more than (1 cm) when a…

A: We are allowed to give the explanation of first question only which is given below. Please repost…

Q: A 0.900 m-long metal wire has a circular cross section of diameter 0.950 mm. One end of the wire is…

A: Write the expression for young’s modulus.

Q: A 200-kg load is hung on a wire of length 4.00 m, cross-sectional area 0.200 x 10-4 m2, and Young's…

A: Given Data: Mass, Wire length, Cross-sectional area, Young’s modulus, Standard Data Used:…

Q: The maximum upward acceleration of a lift of total mass 2500 kg is 0.5 ms, The lift is supported by…

A: Answer 2.575 X 10-4m2

Q: The total tensile load of 160kN of a steel is to be stress at the middle portion limited to 150…

Q: A 0.900 m-long metal wire has a circular cross section of diameter 0.950 mm. One end of the wire is…

Q: 10) A femur bone of length 30 cm and diameter 2.5 cm is subjected to a compressive tress of 1.5 *10…

Q: A cylindrical specimen of a titanium alloy having an elastic modulus of 108 GPa and an original…

Q: A metal wire 75.0 cm long and 0.130 cm in diameter stretches 0.0350 cm when a load of 8.00 kg is…

A: Given: Wire length, L=75 cm=0.75 m Wire diameter, D=0.13 cm=0.0013 m Elongation, ∆L=0.035 cm=0.00035…

Q: When a beam 6m. long with a cross sectional area 0f 19.4 square meters is subjected to a…

A: Young’s modulus (Y) = stress/strain = (F/A)/(ΔL/ L0). Where, F is the force exerted on an object…

Q: A 10.2 m long wire with a cross-sectional area of 0.126 cm2 stretches by 0.196 cm when a tensile…

A: The given values are, L=10.2 mA=0.126 cm2=0.126×10-4 m2∆L=0.196 cm=0.196×10-2 mF=6250 N

Q: The young modulus of a material whose elastic strain and stress are 1.53 and 169.42 N/m²…

A: The elastic strain, strain=1.53 The stress, stress=169.42 N/m2

Q: A spider of mass 6.3 10-4 kg hangs from a 70.9 cm long thread whose diameter is 2.0 10-3 mm.…

Q: Find the minimum diameter of a (50 m)- long nylon string that will stretch no more than (1 cm) when…

A: Initial length of the nylon string Lo = 50 m Change in length of the nylon string ∆L = 1 cm =>…

Q: The young's modulus of a material whose elastic strain and stress are 0.41 and 355.53 N/m?…

Q: A vertical steel girder with a crosssectional area of 0.15 m2 has a 1550 kg sign hanging from its…

Q: Young's modulus of iron rod is 21 x 1010 N/m². A force of 7.0 × 105 N is applied to a 1.5-m length…

Q: A metallic cube whose each side is 10 cm is subjected to a shearing force of 100 kgf. The top face…

Q: A solid body of mass 200kg hanging from a steel. Wire 5m long, and cross section 0.08 cm^2. The wire…

Q: A 10.2 m long wire with a cross-sectional area of 0.126 cm? stretches by 0.196 cm when a tensile…

A: The young's modulus of the material is a fundamental property that depends upon the temperature and…

Q: A wire of 0.5 mm cross-section diameter nd 120 cm length is suspended vertically. What is the…

A: Write the given value of this problem: Diameter of wire(d)=0.5 mm or 0.5×10-3mLength of wire(L)=120…

Q: 4-A cylindrical steel specimen is subjected to a stress of (100 Mpa). If the axial strain ( E. ) is…

Q: A bar of an advanced alloy having an elastic modulus of 107 GPa and an original diameter of 3.8 mm…

Q: A wire of uniform 1mm ^ 2 radius is fixed at its top end and has a weight tied at the other end. If…

Q: The young's modulus of a material whose elastic strain and stress are 0.33 and 145.23 N/m?…

A: Given information: The strain in a material is, ε=0.33 The stress inside the material is, σ=145.23…

Q: The face of an aluminum plate, which is fixed in place, measures 90 cm by 90 cm. The thickness of…

Q: A copper wire of length 3-m and 1-mm diameter is subjected to a tension of 5-N. Calculate the…

A: Given: The length of the wire is 3 m. The diameter of the wire is 1 mm. The tenson in the wire is 5…

Q: A solid copper cube has an edge length of 85.3 cm. Ho w much st The bulk modulus of copper is 1.4x…

A: givenLi=85.3 cmLf=85 cmK=1.4×1011 N/m2

Q: A solid copper cube has an edge length of 88.3 cm. How much stress must be applied to the cube to…

Q: A cube made of an unknown material has a dimension of 6 cm on all edges. If the upper face is…

A: The given data are listed below with appropriate variables. Here, L denotes the sides of a cube, ∆x…

Q: A 16.3 cm long tendon is found to stretch 2.11 mm when a force of 18.8 N is applied to it. If the…

A: Given value--- initial length = 16.3 cm. change in length = 2.11 mm. Force = 18.8 N . diameter =…

Concept explainers

Mechanical Properties of Solids

There are three types of matter- solid, liquid and gas. Out of them, solids have a rigid shaped and size. The intermolecular forces of attractions in solids are greatest. Mechanical properties are the physical properties of a material which it shows, when it is provided with certain amount of force or load. These properties are to be kept in mind for various purposes. When a force is applied to an object, the object may or may not get deformed depending upon its elastic property. But every time the object develops a restoring force against the force applied. This is commonly known as stress. If the object changes its dimensions due to the force applied it develops strain ( which is the ratio of change in dimension to the original dimension).

Question

A wire of uniform cross sectional area of 0.25 mm? is stretched at both ends by a total force of 65 N and the strain produced by the wire is 2 x 10-2 m. Calculate the Young modulus of the material of the wire.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

A 100-N weight is attached to a free end of a metallic wire that hangs from the ceiling. When a second 100-N weight is added to the wire, it stretches 3.0 mm. The diameter and the length of the wire are 1.0 mm and2.0 m, respectively. What is Young’s modulus of the metal used to manufacture the wire?
Alarge uniform cylindrical steel rod of density =7.8g/cm3 is 2.0 m long and has a diameter of 5.0 cm. the rod is fastened to a concrete floor with its long axis vertical.what is the normal stress in the rod at the cross-section located at (a)1.0 mfrom its lower end?(b)1.5 m from the lower end?
A uniform wire (Y = 2.0 1011 N/m2) is subjected to a longitudinal tensile stress of 4.0 107 N/m2. What is the fractional change in the length of the wire?
Normal forces of magnitude 1.0106N are applied uniformly to a spherical surface enclosing a volume of a liquid. This causes the radius of the surface to decrease from 50.000 cm to 49.995 cm. What is the bulk modulus of the liquid?
A steel cable 2.00 m in length and with cross-sectional radius 0.350 mm is used to suspend from the ceiling a 10.0-kg model aircraft that is flying in a horizontal circle with an angular speed of 6.00 rad/s. What is the strain produced in the cable?
An aluminium (=2.7g/cm3) wire is suspended from the ceiling and hangs vertically. How long must the wire be before the stress at its upper end reaches the proportionality limit, which is 8.0107N/m2 ?
Can Young’s modulus have a negative value? What about the bulk modulus?
Two thin rods, one made of steel and the other of aluminium, are joined end to end. Each rod is 2.0m long and has cross-sectional area 9.1mm2 . If a 10,000N tensile force is applied at each end of the combination, find: (a) stress in each rod; (b) strain in each rod; and, (c) elongation of each rod.
Assume Youngs modulus for bone is 1.50 1010 N/m2. The bone breaks if stress greater than 1.50 108 N/m2 is imposed on it. (a) What is the maximum force that can be exerted on the femur bone in the leg if it has a minimum effective diameter of 2.50 cm? (b) If this much force is applied compressively, by how much does the 25.0-cm-long bone shorten?
The bulk modulus of a material is 1.01011N/m2 . What fractional change in volume does a piece of this material undergo when it is subjected to a bulk stress increase of 107N/m2 ? Assume that the force is applied uniformly over the surface.
A 90-kg mountain climber bangs from a nylon rope and stretches it by 25.0 cm. If the rope was originally 30.0 m bog and its diameter is 1.0 cm, is Young’s modulus for the nylon?
A copper rod with length 1.4 m and cross-sectional area 2.0 cm2 is fastened to a steel rod of length L and cross-sectional area 1.0 cm2. The compound structure is pulled on each side by two forces of equal magnitude 6.00 104 N (Fig. P14.57). Find the length L of the steel rod if the elongations (L) of the two rods are equal. Use the values Ysteel = 2.0 1011 Pa and YCu = 1.1 1011 Pa. FIGURE P14.57