An oil is acting as a lubricant for a pair of cylindrical surfaces. The angular velocity of the outer cylinder is 7908 rpm. The outer cylinder has a radius of 5.06 cm, and the clearance between the cylinders is 0.027 cm. What is the maximum temperature in the oil if both wall temperatures are known to be 70°C? The physical properties of the oil are assumed constant at the following values: Viscosity Density 92.3 cP 1.22 g/cm³ Thermal conductivity 0.0055 (cal/s)/(cm °C)

An oil is acting as a lubricant for a pair of cylindrical surfaces. The angular velocity of the outer cylinder is 7908 rpm. The outer cylinder has a radius of 5.06 cm, and the clearance between the cylinders is 0.027 cm. What is the maximum temperature in the oil if both wall temperatures are known to be 70°C? The physical properties of the oil are assumed constant at the following values: Viscosity Density 92.3 cP 1.22 g/cm³ Thermal conductivity 0.0055 (cal/s)/(cm °C)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A rotating viscometer consists of two concentric cylinders—a stationary inner cyliner of radius Ri and an outer cylinder of inside radius Ro rotating at angular velocity (rotation rate) ?o. In the tiny gap between the two cylinders is the fluid whose viscosity (? ) is to be measured. The length of the cylinders in Fig is L. L is large such that end effects are negligible (we can treat this as a two-dimensional problem). Torque (T) is required to rotate the inner cylinder at constant speed. Showing all your work and algebra, generate an approximate expression of T as a function of the other variables.
(i) Define Kinematic viscosity and derive its unit. (ii) Discuss about Vena Contracta with the help of a diagram. BI Paragraph v Path: p Maximum file size: 100MB, maximum number of files: 1 Files
If the shear rate increases and the viscosity decreases, then how can this fluid be classified?A. Time-independent and thixotropicB. Time-dependent and thixotropicC. Dilatant and thixotropicD. More than one possible answer.
what is the relationship between the fluid viscosity and the drag force Fdrag?
The properties of mercury at 300 K are Density = 13529 kg/m³. c = 0 1393 kJ/kgk dynamic viscosity = 0 1523 x 102 Ns/m² and thermal conductivity = 8 540 W/mK . What is the Prandtl number of the mercury at 300 K?
Example 5 The space between two square flat parallel plates is filled with oil. Each side of the plate is 60 cm. The thickness of the oil film is 12.5 mm. The upper plate, which moves at 2.5 metre per sec requires a force of 98.1 N to maintain the speed. Determine : - i.the dynamic viscosity of the oil, and ii.the kinematic viscosity of the oil if the specific gravity of the oil is 0.95.
plz help me with this one i would appreciate it if you help me now A piston with a diameter of 0.8 m and width of L=0.6 m rotates with 6 rad/s inside a cylinder that has a diameter of 1 m that filled with oil that has a viscosity of 8x10-3 N.s/m2 What is the shear force that acts on the circumference of the piston (N)? Assume the variation in velocity of the oil is linear.
During a viscosity test corresponding to shear stress values of 0,30,55,80,96,110,120 pa the shear strain values were obtained to be 0,4,8,12,16,20 and 24 per second respectively. The fluids is Dialatant Bingham Newtonian Pseudo-plastic
A plate situated at distance of 7 mm from a fixed plate is moving at velocity of 3 m/s. The gap between the plates is filled with oil with density of 800 kg/m3 and kinematic viscosity of 1,25·10-4 m2/s. What is the shear stress on the surfaces? Round off the answer to an integer in Pa, but enter the answer without the unit.
A rotating viscometer consists of two concentric cylinders-a stationary inner cylinder of radius R, and an outer cylinder of inside radius Ro rotating at angular velocity (rotation rate) wo. In the tiny gap between the two cylinders is the fluid whose viscosity (u) is to be measured. The length of the cylinders (into the page in Figure 1) is L. L is large such that end effects are negligible (we can treat this as a two-dimensional problem). Torque (T) is required to rotate the outer cylinder at constant speed. Showing all your work and algebra, generate an approximate expression of T as a function of the other variables. Liquid: p, Ro Ri Stationary inner cylinder Rotating outer cylinder Figure 1 Wo
A piston with a diameter of 0.8 m and width of L-0.2 m rotatęs with 6 rad/s inside a cylinder that has a diameter of 1m that filled with oil that has a viscosity of 8x10 N.s/m 2.00 What is the shear force that acts on the circumference of the piston (N)? ion Assume the variation in velocity of the oil is linear. piston Oil 0.8 m 1 m
Anoilring bearing of transmission shaft of 50 mm diameter in which journal rotates at 1450 rpm, radial clearance and bearing pressure are 20 µ and 4 N/mm². If Sommerfeld number is 0.0637, the viscosity of lubricant is