An oil with p-900 kg/m and v= 0.0002 m/s flows upward through an inclined pipe as shown in Fig. E6.4. The pressure and elevation are known at sections 1 and 2, 10 m apart. Assuming d=6 cm 10 m - 250,000 Pa 40 P= 350,000 Pa, z = 0 %3D steady laminar flow, (a) vetify that the flow is up, (b) compute h, between l and 2, and compute (c) Q. (d) V, and (e) Re Is the flow really laminar?

An oil with p-900 kg/m and v= 0.0002 m/s flows upward through an inclined pipe as shown in Fig. E6.4. The pressure and elevation are known at sections 1 and 2, 10 m apart. Assuming d=6 cm 10 m - 250,000 Pa 40 P= 350,000 Pa, z = 0 %3D steady laminar flow, (a) vetify that the flow is up, (b) compute h, between l and 2, and compute (c) Q. (d) V, and (e) Re Is the flow really laminar?

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter6: Hydraulic Conductivity

Section: Chapter Questions

Problem 6.14P

See similar textbooks

Similar questions

Oil (SG = 0.83) flows at a rate of 200 L/s through a 500m pipe with a diameter of 200mm. The friction factor of the pipe is 0.0225. The pipe slopes down at 10 degrees from the horizontal. Determine the difference in pressure between the start of the pipe to the end of the pipe. A) 287.79 KPa B 176.36 KPa c) 129.34 KPa D No Answer among the choices 238.86 KPa
Ex Oil flows steadily in a vertical pipe. Pressure at z=100m is 200 kPa, and at z=85m it is 250 kPa. Given: Diameter D = 3 cm Viscosity u = 0.5 Ns/m² Density p = 900 kg/m³ %3D Assume laminar flow. Is the flow upward or downward? What is the velocity at the center and at r=6mm?
Q3. SAE 30 oil (Sp. Gr. =0.833) with a dynamic viscosity 0.28 N.S/m? flows in a 4-cm-diameter pipe which is inclined with an angle 37°. For the pressure measurement shown, determine A. Whether the flow is up or down The flow rate in m'/h C. The shear stress and velocity 1 cm from the boundary Draw the shear stress and velocity profile with the section of the pipe. В. D. P-180 kPa P- sOokPa 15m 20m
The pipe bend shown is in a horizontal plane. Oil with a specific gravity of 0.86 enters the reducing bend at section A with a velocity of 3.2 m/s and a pressure of 150 kPa. Neglecting head loss, determine The pressure at section B, ps (kPa) FMx (N) FMY (N) de = 100 mm da = 150 mm 30°
Oil (SG = 0.83) flows at a rate of 200 L/s through a 500m pipe with a diameter of 200mm. The friction factor of the pipe is 0.0225. The pipe slopes down at 10 degrees from the horizontal. Determine the difference in pressure between the start of the pipe to the end of the pipe. A) 287.79 KPa B) 176.36 KPa c) 129.34 KPa D No Answer among the choices E) 238.86 KPa
At 20 degree celsius, gage A in the figure reads 295 kPa absolute. The tank is 2m wide perpendicular to the figure. Assume atmospheric pressure to be 1 bar. Sp.gr. of mercury is 13.6. Determine the total pressure acting on side CD in kN. P = 183 kPa abs. show solution and diagram
The pipe bend shown is in a horizontal plane. Oil with a specific gravity of 0.86 enters the reducing bend at section A with a velocity of 3.2 m/s and a pressure of 150 kPa. Neglecting head loss, determine (a) The velocity at section B, V3 (m/s) (b) The pressure at section B, ps (kPa) (c) FMx (N) de = 100 mm B da = 150 mm 30°
Oil (SG = 0.83) flows at a rate of 200 L/s through a 500m pipe with a diameter of 200mm. The friction factor of the pipe is 0.0225. The pipe slopes down at 10 degrees from the horizontal. Determine the difference in pressure between the start of the pipe to the end of the pipe. A No Answer among the choices В 287.79 KPa (c) 176.36 KPa C D) 129.34 KPa E 238.86 KPa
An oil with p=900 kg/m² and v==0.0002 m/s flows upward through an inclined pipe as shown in Fig. E6.4. The pressure and elevation are known at sections 1 and 2, 10 m apart. Assuming d=6 cm 10 m P,= 250,000 Pa 40 P,= 350,000 Pa, z, =0 steady laminar flow, (a) verify that the flow is up, (b) compute h, between I and 2, and compute (c) Q. (d) V, and (e) Re Is the flow really laminar? mpgd'h Q = 128µL 3,431,600 66 10 & Density of Air p = 1.205 kg/m 364 S444 D176= 15 14 0 6 +Go Coefficient of viscosity for air = 1.80 x 10-5 he 151 355m Force of gravity 9.807 Density of waterp 998 kg/m? %3D Coefficient of viscosity (water) u = 0.001 kg/(m.s) For gasoline at 20°C, from the Table p= 680 kg/m³,y = pg, g =9.81
2. An oil is flowing between two parallel horizontal plates which are 20 mm apart. The top plate is moving with a uniform speed 0.1 m/s. The viscosity of the oil is 0.1 N.s/m². The velocity at the centerline is 1.95 m/s. Consider the flow to be a fully developed one. a) Derive the velocity profile b) Calculate pressure difference between two points (Pi-P2) 5 m apart c) Find the velocity at 3 mm from the wall of the bottom plates. d) Find the velocity at 3 mm from the wall of the top plates. e) Determine force acting on the bottom wall, (W=10 cm) 0.1 m/s Oil P1 P2 2 cm y 5 m
1. A block, 1ft square and 9 inches deep floats on a stratified liquid composed of a 6in layer of water above a layer of mercury. Determine the weight of the block if the position of its bottom is 1 inch below the mercury. 2. At point A in a pipeline carrying water, the diameter is 1m, the pressure is 98kPa and the velocity is 1m/s. At point B, 2m lower than A, the diameter is 0.5m and the pressure is 20kPa. Determine the direction of flow. Show detailed computation. 3. What is the hydraulic radius of the channel shown: 1.5m 1.5h 4. wty A vertical right-angled triangular surface has a vertex in the free surface of a liquid. Find the force on one side. 1.5m 1:2m
Q1) Pressure gage B is to measure the pressure at point A in a water flow as shown in Figure Ql. If the pressure at B is P kPa, estimate the pressure at 4, in kPa. Assume all fluids are at 20°C. Properties: 7 = 9790 N/m³ 7 merany = 133,100 N/m³ y = 8720 N/m³ SAE 30 oil Gage B Мercury. б ст 5 сm Water flow 11 cm 4 cm Figure Q1