Please solve it b) A 3-phase transmission line of 15000 m long, supplies a balanced load at110kV. The resistance per conductor is 1.6670/km/phase, the reactance is3.6670/km/phase, the voltage regulation is 20%, and the load angle is 9.5%Calculate:-➤ The voltage and current at the sending-end.3.667> The receiving-end and the sending-end powers.The receiving-end and the sending-end power factors.The power loss and the efficiency

A transmission line is a conductor used to move electrical energy over long distances from power…

b) A 3-phase transmission line of 15000 m long, supplies a balanced load at 110kV. The resistance per conductor is 1.6672/km/phase, the reactance is 3.6670/km/phase, the voltage regulation is 20%, and the load angle is 9.5º. Calculate:- ➤ The voltage and current at the sending-end. The receiving-end and the sending-end powers. >The receiving-end and the sending-end power factors. The power loss and the efficiency

b) A 3-phase transmission line of 15000 m long, supplies a balanced load at 110kV. The resistance per conductor is 1.6672/km/phase, the reactance is 3.6670/km/phase, the voltage regulation is 20%, and the load angle is 9.5º. Calculate:- ➤ The voltage and current at the sending-end. The receiving-end and the sending-end powers. >The receiving-end and the sending-end power factors. The power loss and the efficiency

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter4: Transmission Line Parameters

Section: Chapter Questions

Problem 4.10MCQ: Transmission line conductance is usually neglected in power system studies. True False

See similar textbooks

Similar questions

A single-phase overhead transmission line consists of two solid aluminum conductors having a radius of 3 cm with a spacing 3.5 m between centers. (a) Determine the total line inductance in mH/m. (b) Given the operating frequency to be 60 Hz, find the total inductive reactance of the line in /km and in/mi. (c) If the spacing is doubled to 7 m, how does the reactance change?
One circuit of a single-phase transmission line is composed of three solid 0.12" radius wires. The return circuit is composed of two 0.15" radius wires. Find the inductance of the complete line in mH/mi. The distance between wires are 40" horizontally and 25" vertically. A. 2.54 mH/mi B. 2.478 mH/mi C. 2.488 mH/mi D. 2.567 mH/mi Provide Clear Explaination
Consider the 500 kV, three phase bundled conductor line as shown in the figure below. Find the line to neutral capacitance. 0.5 m 30 mm (0) (O to Ine 15 m 15 m
Q1: A 3-phase of sequence ABC transmission line has a conductors of cross section area (82 mm?) and a diameter of (1 cm) as shown in figure below. Delivers a load of 15 MW at 30 kV and power factor of 0.78. Determine the efficiency and voltage regulation of the line. If the line length (65km). The line is completely transposed. For the copper p = 1/58 per meter length. 3 m 4 m 6 m 4 3 m
2. A three-phase 60-hz transmission line has its conductors arranged in a triangular formation so that two of the distances between conductors are 20 ft and the third is 40 ft. The conductors are ACSR Rook. Determine the capacitance to neutral in microfarads per mile and the capacitive reactance to neutral in ohm-miles. If the line is 115 mi long, find the capacitance to neutral and capacitive reactance of the line.
Problem 1 a- Explain the meaning of the term "bundle conductor transmission line" and discuss the effects of its use on the electrical performance of a high voltage electric transmission line. b- Consider an experimental 1800 kV three phase bundle-conductor line with parameters A= 0.95 and B=j 70. Determine the value of the parameter C of the line. Assume that the line is delivering 2,000 MVA at receiving end whose voltage of 1750 kV and unity power factor. Determine the sending end voltage of the line. d- C- Determine the sending end current of the line.
1) A 60-Hz, ...-km, three-phase overhead transmission line has a series impedance z = 0.8431L79.04 ohm/km and a shunt admittance y = 5.105 × 106 L90 S/km. The load at the receiving end is 125 MW at unity power factor and at 215 KVLL. Determine the voltage, current, real and reactive power at the sending end and the percent voltage regulation of the line for nominal pi network. (Please determine the length of the transmission line within the specified limits: 150-220 km. By considering the length value you determined yourself, solve the question.)
A 220 kV, 50 Hz, three-phase transmission line is 60 km long. The resistance per phase is 0.15 ohms/km and the inductance per phase is 1.3 mH per km and the shunt capacitance is negligible. Use the short line model to determine; i) the voltage and power at the sending end ii) voltage regulation and efficiency when the line is supplying a three-phase load of 350 MVA, 220 kV at a power factor of 0.85 lagging.
60 Hz three-phase transmission line, Each single phase transmission line consists of two hard-drawn aluminium conductors with a radius of 2 cm spaced 1.2m apart. It delivers 150 MW at 220 KV at the receiving end with a power factor of 0.88 lagging. If the transmission line is 30 Km long and the temperature of the conductors is 20 C. Ignore the skin effect and consider the resistivity of Aluminium is (2.83 x 10-8), and permeability of free space, u= 4pi*10-7 N/A2 and permeability of it is= 8.85x10-12 F/m. - Find total series impedance. - Find total shunt admittance. - Find the voltage at the sending end using long-line equation.
Problem: A three phase transmission line is being supported by 3 disc insulators. The potential across top unit (near the tower) and middle unit are 8 kV and 11 kV respectively. Determine; i) ratio of capacitance between pin and earth to self capacitance of each unit, ii) the line valtage and iii) string efficiency.
vii. RCC poles... R... .C... . used to support transmission tower ix. Calculate charring current per phase for 66kV overheard line in cable using line to neutral capacitance of 0.9 nano Farad capacitance. х. What do you understand by electrical potential at a point on the transmission line conductor... .(one line answer) (Note: add reference if required at the end of answer sheet)
A 220 kV, three phase transmission line is 50 km long. The resistance per phase is r 2 per km and the inductance per phase is L mH per km. The shunt capacitance is negligible. If the line supplies a three-phase load of 229 MVA at 0.8 power factor lagging at 220 kV with an efficiency of 97.13% and a voltage regulation of 4.7581%. Use the short line model to find the line resistance and inductance of the line.