4 Carbon dioxide gas enters a pipe at 3 MPa and 500 K at a rate of 2 kg/s. CO₂ is cooled at constant pressure as it flows inthe pipe, and the temperature of the CO2 drops to 450 K at the exit. The gas constant, the critical pressure, and the criticaltemperature of CO₂ are R = 0.1889 kPa.m³/kg.K, Tcr = 304.2 K, and Pcr = 7.39 MPa. Use data from the tables.3 MPa500 Kmkg/sProblem 03.089.a - Carbon dioxide flow450 KDetermine the volume flow rate and the density of carbon dioxide at the inlet and the volume flow rate at the exit of the pipe using theideal-gas equation. (You must provide an answer before moving to the next part)1 m³/s.The volume flow rate at the inlet isThe density of carbon dioxide at the inlet isThe volume flow rate at the outlet ism³/skg/m³

Introduction We are given information about the conditions of carbon dioxide gas flowing through a…

Carbon dioxide gas enters a pipe at 3 MPa and 500 K at a rate of 2 kg/s. CO₂ is cooled at constant pressure as it flows in the pipe, and the temperature of the CO₂ drops to 450 K at the exit. The gas constant, the critical pressure, and the critical temperature of CO2 are R= 0.1889 kPa.m³/kg-K, Tcr = 304.2 K, and Pcr = 7.39 MPa. Use data from the tables. 3 MPa 500 K mkg/s CO₂ Problem 03.089.a - Carbon dioxide flow Determine the volume flow rate and the density of carbon dioxide at the inlet and the volume flow rate at the exit of the pipe using the ideal-gas equation. (You must provide an answer before moving to the next part) m³/s. The volume flow rate at the inlet is 450 K The density of carbon dioxide at the The volume flow rate at the outlet is let i 1m³/s. kg/m³.

Carbon dioxide gas enters a pipe at 3 MPa and 500 K at a rate of 2 kg/s. CO₂ is cooled at constant pressure as it flows in the pipe, and the temperature of the CO₂ drops to 450 K at the exit. The gas constant, the critical pressure, and the critical temperature of CO2 are R= 0.1889 kPa.m³/kg-K, Tcr = 304.2 K, and Pcr = 7.39 MPa. Use data from the tables. 3 MPa 500 K mkg/s CO₂ Problem 03.089.a - Carbon dioxide flow Determine the volume flow rate and the density of carbon dioxide at the inlet and the volume flow rate at the exit of the pipe using the ideal-gas equation. (You must provide an answer before moving to the next part) m³/s. The volume flow rate at the inlet is 450 K The density of carbon dioxide at the The volume flow rate at the outlet is let i 1m³/s. kg/m³.

Chemistry: The Molecular Science

5th Edition

ISBN:9781285199047

Author:John W. Moore, Conrad L. Stanitski

Publisher:John W. Moore, Conrad L. Stanitski

Chapter9: Liquids, Solids, And Materials

Section: Chapter Questions

Problem 45QRT: At the critical point for carbon dioxide, the substance is very far from being an ideal gas. Prove...

See similar textbooks

Similar questions

Ideal Gas Law The pressure P, temperature T, and volume V ofan ideal gas are related by PV = nRT, where n is the number ofmoles of the gas and R is the universal gas constant. For the pur-poses of this exercise, let nR = 1; therefore, P = T/V.a. Suppose that the volume is held constant and the temperatureincreases by ∆T = 0.05. What is the approximate change inthe pressure? Does the pressure increase or decrease?b. Suppose that the temperature is held constant and the volumeincreases by ∆V = 0.1. What is the approximate change in thepressure? Does the pressure increase or decrease?c. Suppose that the pressure is held constant and the volume in-creases by ∆V = 0.1. What is the approximate change in thetemperature? Does the temperature increase or decrease?
Pressure (A) Explain the term pressure and state its S.I. unit. (B) Explain Henry’s law. (C)A bottle of H2 has just been received by the technicians in DkIT for use in the instrumentation lab. It is a 47 litre cylinder at a pressure of 50 atmospheres. The normal working pressures is 2 bar. (i) To what volume of gas will that equate at the working pressure? (ii) For how many hours will the gas last if it used at the rate of 0.5dm3 per hour? D)You see your best friend at the bar and you walk up behind her. You accidentally startle her and she takes a step backwards. Unfortunately, she is wearing high heels and her heels come down on your foot. She weighs only 55kg but the size of her heel is 6mm by 6mm.Determine the pressure that she applies on your foot. (E) If a diver dives to a depth of 35 m what will be: (i) the pressure in Pascals due the water column? (3 marks) (ii) the pressure of the air in…
Q\3: Oxygen gas produced from the reaction below was collected above the water at 30 Cº and in a container has capacity 150 cm³ until the total pressure reached 80.0 kPa. 2KCIO32KCl +30₂ If the vapor pressure of water at 30 C° equal to 4.24 KPa. Determine: 1. The mass in (g) of dry oxygen produced. 2. The mass in (g) of KCIO3that consumed in reaction. {K = = 40 9 0 = 16 mole 9 Cl = 35.5- R = 8.314 mole mole N.m mole. K
Ethanol vapours were allowed to completely fill a large jug with a volume of 15.5L. The ethanol was burned yielding 5.5mL of pure liquid water in the bottom of the jug at the end of the reaction. C2H5OH + 3 O2 ? 2 CO2 + 3 H20 If the room temperature was 21.5 oC and the pressure was 0.996atm, calculate the percentage yield of the water gathered in the jug.
A 0.210 g sample of a metal, M, reacts completely with sulfuric acid according to the reaction M(s)+H2SO4(aq)⟶MSO4(aq)+H2(g) A volume of 219 mL of hydrogen gas is collected over water; the water level in the collecting vessel is the same as the outside level. Atmospheric pressure is 1.0079 bar and the temperature is 25 °C. The vapor pressure of water at 25 °C is 0.03167 bar. Calculate the molar mass of the metal.
A standard atm is the force per unit area exarted by a column of Mercury 760mmHghigh at 0°C at sea level. The density of Mercury at 0°C is 13.5951gcm-³ (13.5951×10³kgm-³). Use the standard acceleration of free fall (9.8ms-²), calculate the pressure of standard atm in SI units Pa and bar
A rigid insulated tank is divided into 2 equal compartments by athin rigid partition. One of the compartments contains air, assumedto be an ideal gas at 800 kPa and 250◦C. The other compartment isunder a vacuum. The partition is suddenly broken and the air rushesinto the evacuated compartment. The tank pressure and temperatureeventually equilibrate. (a) what is the final temperature of the gas ◦C?(b) what is the final pressure, kPa?(c) how much work is done by the system, kJ/kg?(d) how much heat is transferred to the system kJ/kg
1. 0.45 kg of carbon monoxide (28) and 1 kg of air at 15°C are contained in a vessel of volume 0.4 m'. Calculate the partial pressure of each constituent and the total pressure in the vessel. The gravimetric analysis of air is to be taken as 23.3% oxygen (32) and 76.7% nitrogen (28). IAns. Po, = 0.4359 bar; PN, = 1.64 bar, Poo = 0.962 bar]
P1A.6 The molar mass of a newly synthesized fluorocarbon was measured in a gas microbalance. is device consists of a glass bulb forming one end of a beam, the whole surrounded by a closed container. The beam is pivoted, and the balance point is attained by raising the pressure of gas in the container, so increasing the buoyancy of the enclosed bulb. In one experiment, the balance point was reached when the fluorocarbon pressure was 327.10Torr; for the same setting of the pivot, a balance was reached when CHF3 (M = 70.014 g mol−1) was introduced at 423.22 Torr. A repeat of the experiment with a di erent setting of the pivot required a pressure of 293.22 Torr of the uorocarbon and 427.22 Torr of the CHF3. What is the molar mass of the fluorocarbon? Suggest a molecular formula.
At 0°C and under a pressure of 1.013 x 10ʻ kPa, the compressibility factor of O2 is 0.927. Calculate the weight of O2 needed to fill a gas cylinder with a volume of 100 dm’ under the given conditions. [1.54 x 10ʻ] Calculate the pressure exerted by 1.00 mol of C2H6 at 1000 K in 100 cm', using (a) the ideal gas equation, and (b) the van der Waals equation. The van der Waals constants for CH, are: a = 5.562 bar dm mol2; b= 0.06380 dm³ mol'. [831; 1.72 x 10*]
+ |/ 00 %24 D. Two bulbs are connected by a stopcock. The 7.50 L bulb contains nitric oxide (NO) at a pressure of 0.340 bar, and the 2.50 L bulb contains oxygen (O,) at a pressure of 0.510 bar. 02 ON After the stopcock is opened, the gases mix and react to produce nitrogen dioxide (CON) 2 NO(g) + 0,(g) – 2 NO,(g) Considering that the volume remains unchanged during the experiment, how does the total pressure in the bulbs change if the reaction is allowed to go to completion? The total pressure will remain constant. O There is not enough information to determine how the total pressure will change. O The total pressure will decrease. O The total pressure will increase. MacBook Pro ( The %23 %24 7. 4. 5. 3. R %3D K. H. B C. option command MOSISO
Two flasks of equal volume are connected by a narrow tube (of negligible volume). Initially, both flasks are at 27°C and contain 0.70 moles of hydrogen gas, the pressure being 50,000 Pa. One of the flasks is then immersed in a hot oil bath at 127°C, while the other is kept at 27°C. Calculate the final pressure of the system, in Pa. Calculate the final number of moles of hydrogen gas in the flask that was immersed in the oil bath. R = 0.08205 L atm mol-¹ K-₁ T(K) = T (°C) + 273.15