480 CHAPTER SEVEN Fluid Flow in Pipes FLUID MECHANICS & HYDRAULICS Problem 7-78 A capillary tube of inside diameter 6 mm connects tan A and open container B, as shown in the Figure. The liquid in A, B, and capillary CD is water having a specific weight of 9780 N/m and viscosity of 0.0008 kg/(m-s). The pressure pa - 34.5 kPa. Assume laminar flow. (a) Determine the head loss in the pipe in terms of the discharge Q. Ans: 11,0580 (b) Determine the discharge in L/s. Ans: 0.00787 (c) Determine the Reynolds Number. Ans: 2,079 1.4 m = 4,3 m Container B PA Air 下. 1 m 45 Tank A

480 CHAPTER SEVEN Fluid Flow in Pipes FLUID MECHANICS & HYDRAULICS Problem 7-78 A capillary tube of inside diameter 6 mm connects tan A and open container B, as shown in the Figure. The liquid in A, B, and capillary CD is water having a specific weight of 9780 N/m and viscosity of 0.0008 kg/(m-s). The pressure pa - 34.5 kPa. Assume laminar flow. (a) Determine the head loss in the pipe in terms of the discharge Q. Ans: 11,0580 (b) Determine the discharge in L/s. Ans: 0.00787 (c) Determine the Reynolds Number. Ans: 2,079 1.4 m = 4,3 m Container B PA Air 下. 1 m 45 Tank A

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

oll, s = 0.80 kerosene,s = 0.82 A manomoter is used to moasuro tho s = 0.0012 pressure of air in shown. Solve the pressure at point A given the following hoights: the pipe as Air = 0.35 m,h2 = 0.38 m, h, = 0.20 m, %3D h4 = 0.50 m, hs = 0.10 m, h6 = 0.30 m hz hy h3 ho Water Mercury Mercury
In the figure, in +he water 0,1M -(2) Alow in the T-shapped pipe inthe horizental plane, の3m the flow velocityinthe Ist section 1s v, 4MIS, +he relative pressure is pi = 3 kg lkm? Find the X andy components of the force that the fluid acts on the T- pipe segmant, the ossiming Alow at fluid ideal if the 2nd cross Section Vz =4mls %3D
The steel pipe shown carries water from the main pipe A to the reservoir and is 2 inch in diameter and 240 ft long. What must be the pressure in A to provide a flow of 45 gpm? Clevation K00 t Water 7 50 F Open globe valve 90 bends (threaded)- Elevtion 20 fr 2 in galvanizcd pipe
Subejct: Hydraulics/Fluid Mechanics Oil of sp.gr. of 0.750 flows through the nozzle shown and deflects the mercury in the U-tube gage. Determine the value of H in m if the pressure at A is 142 kPa.
(Flow through Single Pipes). Determine the flow in each pipe and the pressure at the junction node, D. Assume elevation at Node, D to be 328 feet and friction factor, f, of 0.02 for all pipes. [NOTE: This is a three-part problem]. A B Elevation (ft) Length (ft) 19,680 Diameter (ft) Reservoir Pipe Part A) A 656 AD 3.28 В 590 BD 13,120 2.5 558 CD 29,520 2.5 19,680 13,120 Part B) A 656 AD 3.28 В 574 BD 3.28 CD 29,520 19,680 19,680 492 2.5 Part C) A 656 AD 3.28 В 590 BD 3.28 492 CD 19,680 3.28
Home wok 2 Example (8) Steel tube shaft having length 3mm and diameter 50mm subjected to axial compressive force 55 k N and change in temperature ( 100°c drop). Find the change in length and diameter due to compound effect. Note: - E-200 GPa, u-0.3, a=11.5 Mm/ m'e
Water flows from a pressurized tank, through a valve and out a pipe. If Q= 0.1 ft/s, Az 10 ft, P2=0 psig, D = 1lin., ht 5V/2g, please answer the following questions: 1) the pressure in the tank in psig, 2) sketch the EGL of the system., 3) sketch the HGL of the system Air under pressure Water Partly open valve Figure 3. A water tank discharges water through a partly open valve in a pipe with a diameter d
Determine the pressure at the center of the pipe from the piezometer shown. 200mm WATER 75mmØPIPE
Q1: Find the pressure at A and B of the air. piezometer PB PAO A B 800 mm 100 mm Water 300 mm
The fluid in the tank is water. Flow is steady state, incompressible and nonviscid. It is known that the pressure at point (1) is 41.5 kPa(gage). Determine the height x of the tank? 5-m 0.02-m diameter 0.03-m diameter | (1) 0.01-m diameter
Glycerin of SG 1.26 flows through the nozzle shown and deflects the mercury in the U-tube gage. What is the pressure at B in kPa? A 2.75 h B Hg(13.6)
(b) Water flows without viscous effects from the nozzle, as shown in Figure Q2 (b). The pressure meter shows a reading of 80,1 (3) Water jet (2) 0.05 m- 0.8 m 8X.X КРа 0.1 m Figure Q2 (b) (i) Determine the flow rate at the nozzle exit and the height, h if viscous effects are negligible and the specific weight of water is 9.8 kN/m². (ii) Based on your working from Q2(b)(i), explain how the pressure at point (1) and water velocity at point (2) should be adjusted to increase the flow rate at the nozzle exit.