Figure Q1 shows a closed tank of 1.2 m width and 1.2 m height. The tank is filled with water and has a 1.0 m diameter hemispherical dome. A U-tube manometer is connected to the tank. The air pressure at the upper end of the manometer is 90 kPa. The specific weight of water is 9810 N/m³ while the specific gravity of the gage fluid is 3.0. (a) (b) (c) Determine the gage pressure reading on the pressure gage. Determine the resultant hydrostatic force acting on the left wall of the tank, by using the following methods: (i) The hydrostatic force equation (ii) The pressure prism (Sketch the pressure prism) Prove that both methods yield the same solution. Determine the vertical force exerted by the water on the dome. Hints: A free body diagram sketch would be useful. If the upper end of the manometer is now exposed to the atmosphere, and the differential manometer reading and the pressure gage reading are still the same as before, what is the specific gravity of the gage fluid?

Figure Q1 shows a closed tank of 1.2 m width and 1.2 m height. The tank is filled with water and has a 1.0 m diameter hemispherical dome. A U-tube manometer is connected to the tank. The air pressure at the upper end of the manometer is 90 kPa. The specific weight of water is 9810 N/m³ while the specific gravity of the gage fluid is 3.0. (a) (b) (c) Determine the gage pressure reading on the pressure gage. Determine the resultant hydrostatic force acting on the left wall of the tank, by using the following methods: (i) The hydrostatic force equation (ii) The pressure prism (Sketch the pressure prism) Prove that both methods yield the same solution. Determine the vertical force exerted by the water on the dome. Hints: A free body diagram sketch would be useful. If the upper end of the manometer is now exposed to the atmosphere, and the differential manometer reading and the pressure gage reading are still the same as before, what is the specific gravity of the gage fluid?

Name: Figure Q1 shows a closed tank of 1.2 m width and 1.2 m height. The ta
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Figure Q1 shows a closed tank of 1.2 m width and 1.2 m height. The tank is filledwith water and has a 1.0 m diameter hemispherical dome. A U-tube manometer isconnected to the tank. The air pressure at the upper end of the manometer is 90 kPa.The spe

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

a u-tube manometer filled with water ,density 62.4 lbm/ft3, shows a height difference of 10in. what is the gauge pressure? include diagram.
Figure below shows an open water manometer for the measurement of the pressure of a pipeline in Saudi Arabia containing oil (S.G 0.90). The density of water is 1000 kgm/m^3. For the readings given, determine the pressure at point x if the barometric pressure is 100 KPa.
The inverted U-tube manometer of Fig. contains oil (SG 0.9) and water as shown. Find The pressure differential between pipes A and B. If a =1.5 m , h= 90 cm and b=2 m.
Figure 1 shows a fairly large U-tube manometer containing water (density p= 1000.0 kg.m³3) and oil (density p=900.0 kg.m³). The left-hand side opening is sealed with a rubber stopper. The height of the oil column is h₂ cm. The height of the water column above the water/oil boundary is h₁ = 20.00 cm. The external pressure is given by Pout = 100.00 kPa. (i) Calculate the absolute pressure at the bottom of the oil column. (ii) Calculate pin, the absolute pressure directly under the rubber stopper. Express your answers to at least 4 significant figures in SI units. Pout Pin h₁ U water oil h₂ Figure 1: Stoppered U-tube manometer containing water & oil
If a closed tank contains compressed air and oil (SGoil = 0.90), with a U-tube manometer using mercury (SGHg = 13.6), is connected to the tank as shown in the figure below. For column heights h1=1 m, h2= 25 cm, and h3= 245mm then the pressure exerted on the system by the mercury is kPa Air Cil Pressure gage (1) Open (2) H₂
The U-tube manometer is filled by several fluids as shown. Compute the pressure reading at the manometer if hl=10 cm; h2-25 cm; h3=60 cm, and h4-20 cm. The U-tube is open to the atmospheric pressure. Assume SG for oil 0.78 and for Hg 13.7. Water density is 1,000 kg/m³ and air density is 1.225 kg/m³. Air Oil Pressure gage ha h₁ h₂ Open to atmosphere hz Mercury
An inverted differential manometer is connected to two pipes A and B which convey water. The fluid in manometer is oil of SG= 0.8. For the manometer reading shown in the figure, find the pressure difference between A and B. X 30 cm 20 30 OIL OF Sp. gr. 0.8 -X
Oil (SG = 0.92) fills both pipe "A" and pipe "B" which are vertically separated by 24-inches. The two pipes are connected by a mercury (SG=13.6) manometer showing a 12-inch pressure differential. What are the specific weight, density, and specific volume of the oil? What is the difference in pressure between Pipe "A" and Pipe "B" (in psi)?
A tank containing helium has a manometer attached, as shown in the figure. The local atmospheric pressure, P. is 101 kPa and the gravitational acceleration is 9.81 m/s. The heights of each fluid in the manometer are h,-360 mm, h -450 mm and hs550 mm. Assume the densities of the water (pw), light oil (pw), and mercury (p) in the system are equivalent to those at standard tmospheric conditions. Determine the pressure of the helium in the tank, PHe, in kPa. P. Light Oil. P Helium 5. Water. P.
A 10000 litre water tank is placed on a building roof and filled to capacity. The empty tank has a mass of 550kg. It is supported on 4 feet, each of which is a 300 x 300 mm steel plate. What is the pressure exerted by each plate, in Pa? (Round your answer to 2 significant figures)
If a closed tank contains compressed air and oil (SGoil = 0.90), with a U-tube manometer using mercury (SGHg = 13.6), is connected to the tank as shown in the figure below. For equivalent pressure of Poil = 8387.55 Pa, and Pmercury=28.01736 kPa then the gage ready would be Air Oil Pressure gage kPa (1) h₂ h₂ Open 11₂ (2) Hg 3
The U tube differential manometer is connected between two pipes, with the specific gravity of liquid in pipe A & in pipe B is 0.84 and 0.63 respectively as shown in the figure, h;= 104 cm, hz = 28 cm, mercury level difference hg = 16 cm. Find the difference in pressure between the pipes A & B in kPa. (ENTER ONLY THE VALUE IN THE BOXES BY REFERRING THE UNIT GIVEN IN BRACKET. ALSO UPLOAD YOUR HAND WRITTEN ANSWERS IN THE LINK PROVIDED) h2 hi hg The difference in pressure between pipes A &B (in kPa)