he principal stresses at a point in a critical section of a machine component are sigma_{1} = 60MPa, sigma_{2} = 5MPa and sigma_{3} = - 40MPa For the material of the component, the tensile yield strength is sigma_{y} = 200 MPa According to the maximum shear stress theory,what is the factor of safety.

he principal stresses at a point in a critical section of a machine component are sigma_{1} = 60MPa, sigma_{2} = 5MPa and sigma_{3} = - 40MPa For the material of the component, the tensile yield strength is sigma_{y} = 200 MPa According to the maximum shear stress theory,what is the factor of safety.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.2.4P: Solve the preceding problem if the internal pressure is 3,85 MPa, the diameter is 20 m, the yield...

See similar textbooks

Similar questions

Solve the preceding problem if the internal pressure is 3,85 MPa, the diameter is 20 m, the yield stress is 590 MPa, and the factor of safety is 3.0. (a) Determine the required thickness to the nearest millimeter. (b) If the tank wall thickness is 85 mm, what is the maximum permissible internal pressure?
The fluctuating stresses listed in the table are found at a critical location of a component made of steel with Se = 40 ksi, Sy = 80 ksi, Sut = 110 ksi and f= 0.87. These stresses are applied on the part within 10 s. What is the accumulative damage of this part? What is the life of the part in hours if this stress pattern continues to repeat for the remained of the part's life? Use Goodman criterion and Miner's rule in your solution. Loading order |Omin o max |Number of cycles -20 30 -10 50 1 3. -30 30 1
i li. الامتحان هو سؤالان فقط Q. 1: If a material is cast iron (ultimate tensile strength = 300 Mpa, ultimate compressive strength - 900 Mpa) and the stress state at a point is shown in Fig. 1. Using a graphical method, find safety factor against static failure using 100 Mpa (a) Rankine failure theory (b) Coloumb - Mohr theory (c) Modified Coloumb - Mohr theory 50 Мра إضافة ملف Q.2 For a rotating shaft of diameter 15 mm as shown in Fig. 2. If the material is AISI-1045 CD, Find the safety factor II >
A simple rod acted by fluctuating axial force produced a fluctuating stresses as „Sigma_min= - 500MPA, Sigma_max using mod-Goodman were applicable, answer Q6- Q7 100MPA (Sy = 400MPA, Sut = 600MPA) The equivalent fully reversed stress is
The graphical representation of fatigue strength on the Y axis to the number of stress cycles on the X axis is called as Gerber Line O S-N Curve O Soderberg Line O Goodman Line
A machine element is subjected to the following bi-axial state of stress; sigma x = 80 MPa; sigma y = 20 MPa; Txy=40 MPa. If the shear strength of the materials is 100 MPa, find the factor of safety as per Tresca's maximum shear stress theory.
Given: A part is made of ductile material and subjected to principal stresses o1, 02, 03. It is statically loaded. Find: Determine the factor of safety for the part. Use the following parameters in your analysis: ơ1 40 kpsi, Sut = 90 kpsi, Suc = 20 kpsi, 02 = 5 kpsi, oz = -10 kpsi, Sy = %3D = –130 kpsi
2. In the stress-strain curve for steel shown below, identify following stresses in ksi and write their values in the space below: 2.1. Yield Point: ksi 2.2. Ultimate Tensile Strength: ksi 60- 400 350 50 300 E 40 250 30 200 150 20 100- 10 50 0. Strain, in/in or m/m J stv A Aa Stress, MPa Stress, ksi
Example: Convert the change in length data in Table 3-2 to engineering stress and strain and plot a stress-strain curve Homework- help Table 3-2 The results of a tensile test of a 0.505 in. diameter aluminum alloy test bar, initial length (1o) = 2 in. Calculated LTO Load (Ib) Change in Length (in.) Stress (psi) Strain (in./in.) 0.000 1000 0.001 0.0005 4,993 14,978 24,963 34,948 37,445 39,442 39,941 39,691 37,944 3000 0.003 0.0015 5000 0.005 0.0025 7000 0.007 0.0035 7500 0.030 0.0150 7900 0.080 0.0400 8000 (maximum load) 0.120 0.0600 7950 0.160 0.0800 7600 (fracture) 0.205 0.1025
A steel plate is subjected to a constant amplitude uniaxial fatigue loads to produce stresses, max = 180 MPa and min = -40 MPa. The static properties of the steel are YS= 500 MPa, UTS= 600 MPa, E= 207 GPa and Kc= 100 MPa-m1/2 . If the plate contains an initial through the thickness edge crack of 0.5 mm how many fatigue cycles will be required to break the plate. Please state any assumptions you make.
The stresses on the surface of a hard bronze component are shown in the figure below. The yield strength of the bronze is σY = 345 MPa.a) What is the factor of safety predicted by the maximum-shear-stress theory of failure for the stress state shown? Does the component fail according to this theory?b) What is the value of the Mises equivalent stress for the given state of plane stress?c) What is the factor of safety predicted by the failure criterion of the maximum-distortion energy theory of failure? Does the component fail according to this theory?
A steel bar of 8 mm is heated from 10° C to 25° Cand the bar is free to expand. The bar will induce Tensile stress No stress Compressive stress Shear stress