HW 3: A 6600V, 3-ph, Y-connected alternator has a synchronous impedance of (0.4+j6) ohm per phase. Determine the percentage voltage regulation of the machine when supplying a load of 1000 kW at normal voltage and p.f of (i) 0.866 lagging, (ii) unity, (iii) 0.866 leading, giving vector diagrams in each case.

HW 3: A 6600V, 3-ph, Y-connected alternator has a synchronous impedance of (0.4+j6) ohm per phase. Determine the percentage voltage regulation of the machine when supplying a load of 1000 kW at normal voltage and p.f of (i) 0.866 lagging, (ii) unity, (iii) 0.866 leading, giving vector diagrams in each case.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.41P

See similar textbooks

Similar questions

The p.u. impedance value of an alternator corresponding to base values of 13.2 kV and 30 MVA is 0.2 p.u. Then the p.u. impedance value of an alternator for the new base values of 13.8 kV and 50 MVA is......
A synchronous generator has been synchronized to an infinite grid of 13.8 kV and 60 Hz. The generator prime mover C/C is such that the no-load frequency is 62.5 Hz and the power slope is 1 MW/Hz. The AVR C/C (The reactive power against the terminal voltage C/C) is such that the zero reactive power voltage is 14.6 kV, while the slope is 0.4 MVAR/kV. Calculate: (a) the kVA loading of the generator and its power factor. (b) the settings of the prime mover and AVR such that the generator delivers 3 MW at 0.85 lagging power factor.
In a Three-phase alternator, a given field current produces an armature current of 250 A on short-circuit and a generated e.m.f. of 1500 V on open-circuit. Calculate the terminal p.d. when a load of 250 A at 6.6 kV and 0.8 p.f. lagging is switched off. Calculate also the regulation of the alternator at the given load. Subject: Electrical engineering
6.5% ans ex A so kvA. 2o00/20 V, So He single-phase transformar has impedance drof of8% and resistance drop of 4%. Caleulate. The Requlation of the Thams former at full- Load o8 P.s Legging. also find The Power factor at which Voltage requlation will Be Zero. Sols 0.5 leading. s alculate The % Noltege Requlation af atransformar in w hich the Percantage resistance drof is 1% and Percentage dre is 6% when The Power fador is 0.8 lagging ) > unity aMS 38 % ans 1 % (シ→ 0.8 leading . amS - 2.2%
The reactance of a generator is given as 0.25 per-unit based on the generator’s of 18 kV, 500 MVA. Find its per-unit reactance on a base of 20 kV, 100 MVA. a. 0.0505 b. 0.0605 c. 0.0405 d. 0.0606
Driving-point admittance The actual impedance of a load is 30 OHM. The per-unit impedance of the load is 0.5 pu when Base Voltage is 600 V and Base Power is of O 6000 VA O 8000 VA O2000 VA 4000 VA Jump to ncements MacBook Air DD DII F10 F9 F8 000 F7 F6
A 3-phase star connected, 1500 kVA, 13 kV alternator has an armature resistance of 0.9 ohm and a synchronous reactance of 8.0 ohms. When carrying rated load voltage, calculate the generated voltage per phase at loads of I.) Unity P.F. ii.) 0.8 lagging P.F. iii.) 0.8 leading P.F. iv.) calculate the voltage regulation for each load and determine best regulation.
Two alternators rated 400 MW and 600 MW are operating in parallel. The droopcharacteristics of their governors are 3% and 4% respectively from no loadto full load. Assuming that the alternators are operating at 50 Hz at noload, how would a load of 1000 MW be shared between them? What will be thesystem frequency at this load?
b) Two alternators are connected in parallel to feed a load together. The no-load frequency of the first alternator is 51.5 Hz and its slope is 1MW / Hz. The no-load frequency of the second alternator is 51.0 Hz and its slope is 1MW / Hz. The total power of the load fed by these two alternators is 2.5MW and the power factor is 0.8. Accordingly, at what frequency does this system work and what are the power values transferred to the load by each alternator.
Q6. Two identical Y-connected alternators are running in parallel. The generated phase voltages are: E1 = 6.7 kV and E2 = 6.5 kV with E2 leading E1 by 10°. Calculate the voltage across the load per phase and the power factor of the load if the total current is 500A lagging El by 37°. The synchronous reactance of each machine is 10 / phase and resistance is negligible.
two generators supplying a load. Generator I has a no-load frequency of 62.5 Hz and a slope Sp1 of I MW/Hz. Generator 2 has a no-load frequency of 62.0 Hz and a slope sp2 of I MW/Hz. The two generators are supplying a real load totaling 2.5 MW at 0.8 PF lagging. (a) At what frequency is this system operating, and how much power is supplied by each of the two generators? (b) Suppose an additional I-MW load were attached to this power system. What would the new system frequency be, and how much power would Gl and G2 supply now? Generator 1 VT V2 Generator 2 VTí KVAR KVAR
Q3/A) A 1500 kVA, 6600V, three phase star connected alternator with Ra=0.502/phase and Xs-52/phase delivers a full load current at 0.8 lagging power factor load. Find the induced emf per phase. If this induced emf is maintained constant but load is changed to full load unity power factor estimate terminal voltage per phase. B) Answer the following: