n actual design, as per illustration Fig. MT 1, the system has a liquid reservoir also acting as an accumulator. The line that connects to the thermal expansion valve is connected underneath the accumulator. This will ensure that only refrigerant will be atomized by the valve supplied to the evaporator. R THE VAPOUR COMPRESSION REFRIGERATION CYCLE HIGH PRESSURE GAS LOW PRESSURE GAS LOW PRESSURE GASLIQUID HIGH PRESSURE LIQUID EVAPORATOR HEAT ABSORBED FRIDGE SPACE SENSING BULB LOW PRESSURE SIDE COMPRESSOR ACCUMULATOR EXPANSION VALVE TRAP SIGHT GLASS TUF DRAIN DRYER CARTRIDGE CONDENSER HEAT EXPELLED SEA WATER OR FAN COOLED PURGING VALVE E LIQUID RESERVOIR HIGH PRESSURE SIDE 4 PUMP

n actual design, as per illustration Fig. MT 1, the system has a liquid reservoir also acting as an accumulator. The line that connects to the thermal expansion valve is connected underneath the accumulator. This will ensure that only refrigerant will be atomized by the valve supplied to the evaporator. R THE VAPOUR COMPRESSION REFRIGERATION CYCLE HIGH PRESSURE GAS LOW PRESSURE GAS LOW PRESSURE GASLIQUID HIGH PRESSURE LIQUID EVAPORATOR HEAT ABSORBED FRIDGE SPACE SENSING BULB LOW PRESSURE SIDE COMPRESSOR ACCUMULATOR EXPANSION VALVE TRAP SIGHT GLASS TUF DRAIN DRYER CARTRIDGE CONDENSER HEAT EXPELLED SEA WATER OR FAN COOLED PURGING VALVE E LIQUID RESERVOIR HIGH PRESSURE SIDE 4 PUMP

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter44: Geothermal Heat Pumps

Section: Chapter Questions

Problem 12RQ: The function of the pressure tank in an open-loop, geo-thermal heat pump well system is to prevent...

See similar textbooks

Similar questions

Why is a circulating brine system more attractive for ship refrigeration than individual evaporators?
I. ESSAY/ ENUMERATION 1. GIVE ATLEAST 5 ADVANTAGES AND 5 DISADVANTAGES OF INORGANIC REFRIGERANTS. 2. HOW DOES A REFRIGERANT WORKS IN A REFRIGERATION SYSTEM? 3. DIFFERENTIATE POSITIVE AZEOTTROPES AND NEGATIVE AZEOTROPES IN TERMS OF THEIR APPLICATION IN REFRIGERATION SYSTEMS. 4. THE FOUR MAIN COMPONENTS OF A REFRIGERATION SYSTEM ARE COMPRESSOR, CONDENSER, EVAPORATOR AND AN EXPANSION VALVE. EXPLAIN BRIFLY THE FUNCTION OF EACH COMPONENT AND THE FLOW OF THE CYCLE.
Problem 3: The high_temperature evaporator (Refrigeration capacity 5 TR) of a multi-evaporator VCR system, working with ammonia, is operating at -6°C and the low temperature evaporator (Refrigeration capacity 10 TR) is operating at -34°C. The condenser pressure is 10.99 bar. The system using individual expansion valves for each evaporator. Assuming saturated conditions at the exit of evaporators and condenser and isentropic compression: a) Find the required power input and COP if a single compressor is used. b) If individual compressors are used for both stage find the power input and COP. c) Compare both cases.
draw the schematic diagram only A vacuum refrigeration system consists of a large insulated flash chamber kept at a low pressure by a steam ejector which pumps vapour to a condenser. Condensate is removed by a condensate to an air vent. Warm retum water enters the flash chamber at 13°C, chilled water comes out of the flash chamber at 5 C. Vapour leaving the flash has a quality of 0.97 and the temperature in the condenser is 32°C. For 350 kW of refrigeration.
Draw the schematic and p-h diagram for the problem below: A two-stage cascade refrigeration system uses ammonia as the working substance. The evaporator is at -35 degree Celsius and high pressure condenser is at 1514.2 kPa. The cascade condenser is a direct-contact type. The refrigeration load is 90 tons. Determine the a.) mass flow rate in the low-pressure loop. b.) The mass flow rate in the high-pressure loop, c.) the power required, d.) the COP, and e.) the quantity of the fluid entering.
The food storage room requires a cooling system with a capacity of 10 tons of refrigeration that operates at an evaporator temperature of -17.8 ° C and a condenser temperature of 33.9 ° C. The refrigerant used is R-717 and the system operates in saturated conditions. questions a. COP = Answer. b. Refrigerant flow rate = Answer kg / s. c. Heat loss rate in condenser = Answer kJ / s
From the knowledge you have learned in the simple vapour compression cycle and multi-pressure refrigeration system, For both the diagram apply your knowledge by:a. Draw the PH diagram from the given schematic diagram belowb. Explain in details the concept and principle behind the diagram. This includes the mass of refrigerant flow and distribution.c. Explain in details the analysis behind the diagram.
Draw the schematic and p-h diagram for the problem below: A two-stage cascade refrigeration system uses ammonia as the working substance. The evaporator is at -35 degree Celsius and high pressure condenser is at 1514.2 kPa. The cascade condenser is a direct-contact type. The refrigeration load is 90 tons. Determine the a.) the COP, and b.) the quantity of the fluid entering.
QUIZ 2 An ideal multi-pressure refrigeration system consists of two Compressors serving one 60 Tons Evaporator at -20°C. The system uses two-stage compression with intercooling and flash Tank. A pressure reducer valve reduces the condenser pressure to intercooler pressure. The condensing temperature is 47°C. The refrigerant is R22. Calculate (a) enthalpy leaving evaporator (b) enthalpy leaving LP compressor (c) enthalpy entering HP compressor
Please calculate enthalpies and the heat of a condenser and evaporator. Thank you
with schematic diagram A vacuum refrigeration system consists of a large insulated flash chamber kept at low pressure by a steam ejector which pumps vapor to a condenser. condensate is removed by a condensate to an air vent. warm return water enters the flash chamber at 13 c, chilled water comes out of the flash chamber at 5 c. vapor leaving the flash chamber has a quality of 0.97 and the temperature in the condenser is 32 c. for 350 kw of refrigeration. a) how much chilled water at 5 deg C does this system provide b) how much make up water is needed c) how much vapor must the system ejector remove from the flash chamber answers: a) 10.41 kg/s b) 0.1521 kg/s c) 21.7 kg/s
Figure below shows a steam jet refrigeration system that produces chilled water in a flash chamber. The chamber is maintained at a pressure by the steam ejector, which removes the vapor generated by entraining it in the low-pressure jet and discharging into the condenser. The vacuum pump removes air and other non-condensable gases from the condenser shell. For the conditions shown on the figure, determine the make-up water and cooling water flow rates in kg/hr. Show diagrams if there are any