Performance of a compressor needs to be analyzed. Air enters the compressor of an air- standard Brayton cycle at 100 kPa, 300 K, with a volumetric flow rate of 5 m'/s. The turbine inlet temperature is 1400 K. The efficiency of the compressor is 70%. For compressor pressure ratios of 8, (draw layout and T-s diagram) analyze: a. The thermal efficiency of the cycle. b. Outline and compare the effect on cycle efficiency, if compression ratio is increased beyond 8?

Performance of a compressor needs to be analyzed. Air enters the compressor of an air- standard Brayton cycle at 100 kPa, 300 K, with a volumetric flow rate of 5 m'/s. The turbine inlet temperature is 1400 K. The efficiency of the compressor is 70%. For compressor pressure ratios of 8, (draw layout and T-s diagram) analyze: a. The thermal efficiency of the cycle. b. Outline and compare the effect on cycle efficiency, if compression ratio is increased beyond 8?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A,B and C were answered, proceed to D,E and F. Air enters the compressor of an ideal air standard brayton cycle at 100 kPa, 300 K, with a volumetric flow rate of 5 cu.m/s. The compressor pressure ratio is 10. The turbine inlet temperature is 1400 K. Compute the (a) P, V, and T at each point of the cycle; (b) QA, QR in kW; (c) WC, WT in kW; (d) rp, TBW; (e) e; (f) mep.
The Fifth Question: A six-cylinder, 4-stroke petrol engine develops 62 H.P at 3000 r.p.m. The volumetric efficiency at N.T.P. is 85%. The bore is equal to the stroke and thermal efficiency of 25 % may be assumed. Calorific value of petrol is 44100 kj/kg. Air-fuel ratio is to be 15:1. Calculate the cylinder bore and stroke.
QUESTION 26 Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 300 K, with a volumetric flow rate of 5 m³/s. The compressor pressure ratio is 10. The turbine inlet temperature is 1400 K. The diagram that shows the operation of the system is figure (A,B.....not in the diagram) and the heating and cooling are (name the component). A с pom (b) T-s diagram D B E High Depart (example adiabatic, isothermal...) processes. The work output is from the
Hello, this is the problem attached below: An air-standard dual cycle has a compression ratio of 8.6 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.75 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K.b) the net work of the cycle, in kJ.c) the power developed at 3000 cycles per minute, in kW.
An engine undergoes a Diesel Cycle with the following conditions: air at the start ofcompression is at 100 kPa, 23 °C. The peak temperature in the cycle is 2200 K, and it is designed witha cutoff ratio of 2.5 in mind. Using cold air standard, calculate for the following: a. compression ratio (r)b. pressures, volumes, temperatures of all states (in kPa, m3, and K, respectively) and specific net work per cycle (kJ/kg) c. efficiency from work and heat values (%), and from the formula containing r, rc, and k (%)
Example dulmalek Air enters the compressor of an ideal air-standard Brayton cycle at 300K. the compressor ratio is 8 and the turbine inlet temperature is 1300K. Determine: a) The gas temperature at the exit of the compressor and the turbine. b) The back work ratio. c) c) The thermal efficiency. Assume the compressor efficiency of 80 percent and the turbine efficiency of 85 percent. d) The thermal efficiency of the gas-turbine power plant if generation having an effectiveness of 80 percent is installed. Shay
7. At the beginning of compression in an ideal air standard Diesel cycle, the compression ratio is 16 with P,= 100 kPa and T,=300K. The maximum temperature of the cycle is 2000K. If c,=1.005 Kj/Kgm-k and c=0.718 Kj/Kgm-k for the air, compute A) the pressure, temperature and volume at four corners of the cycle. B) the heat transfer. C)the work done per kgm for each process, and D) the cycle thermal efficiency
A Brayton cycle inlet is at 300 K. Inlet and exit temperatures of the turbine is measured as 1800 K and 710 K, respectively. The compressor pressure ratio is 13. Use cold air-standard approach to calculate the thermal efficiency of the cycle. BURNER- COMPR. TURBINE a. 0.35 O b. 0.40 C. 0.45 d. 0.50 e. 0.55 f. 0.60 g. 0.65 Seçimimi temizle
Air standard Brayton cycle: description of the processes, p- diagram.
An ideal Otto engine with 15 clearance (15% of the volume displacement) operates on 0227kg/s of air intake is 100.58kPaa, 37.7 C The energy released during combustion is 110kW. For air standard cycle, compute (a) Pressure (kPaa), Volume (m/s) and Temperature (€) in each state point of the cycle (b) work produced by the cycle (kW). (c) thermal efficiency () and (d) the mean effective pressure of the cycle (kPa)
I only need help with parts e to i. At the beginning of the compression process of an air standard Otto cycle, p1 = 1 bar, T1 = 300 K. The maximum temperature in the cycle is 2250 K and the compression ratio is 9.8. The engine has 4 cylinders and an engine displacement of Vd = 2.1 L. Determine per cylinder: a) the volume at state 1.b) the air mass per cycle.c) the heat addition per cycle, in kJ.d) the heat rejection per cycle, in kJ.e) the net work per cycle, in kJ.f) the thermal efficiency.g) the mean effective pressure, in bar.h) Develop a full exergy accounting per cycle, in kJ. Let T0 = 300 K, p0 = 1 bar.i) Devise and evaluate the exergetic efficiency for the cycle.
hi At the beginning of the compression process of an air standard Otto cycle, p1 = 1 bar, T1 = 300 K. The maximum temperature in the cycle is 2250 K and the compression ratio is 9.8. The engine has 4 cylinders and an engine displacement of Vd = 2.6 L. Determine per cylinder: Only letters d,e, and f needed a) the volume at state 1.b) the air mass per cycle.c) the heat addition per cycle, in kJ.d) the heat rejection per cycle, in kJ. - <e) the net work per cycle, in kJ. - <f) the thermal efficiency. - <