Q1. Assume your section is BEE-5D, last three digits of your registration number are 124 and your CGPA is 3.23. Create three strings from your actual section, registration number and CGPA as follows: strl = BEE5D1243.23, str2 = 1243.23 and str3 = 3.23. Convert these strings to binary as the following: a) strl (including decimal point) using 7-bit ASCII b) str2 using packed BCD (keep the decimal point in its current position) c) str3 using single precision real numbers

Q1. Assume your section is BEE-5D, last three digits of your registration number are 124 and your CGPA is 3.23. Create three strings from your actual section, registration number and CGPA as follows: strl = BEE5D1243.23, str2 = 1243.23 and str3 = 3.23. Convert these strings to binary as the following: a) strl (including decimal point) using 7-bit ASCII b) str2 using packed BCD (keep the decimal point in its current position) c) str3 using single precision real numbers

Database System Concepts

7th Edition

ISBN:9780078022159

Author:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Publisher:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Chapter1: Introduction

Section: Chapter Questions

Problem 1PE

See similar textbooks

Similar questions

5. Add the two (32-bit precision) hexadecimal numbers, 0x80000000 and 0x80000000, and determine the values of the NZCV flags. a. N= 0, Z = 0, C = 0, V = 0 b. N=0, Z = 1, C = 1, V = 0 c. N= 1, Z = 1, C = 1, V = 1 d. N = 1, Z = 1, C = 1, V = 0 None of the above e.
A set of current readings is stored in memory locations starting at XX50H. The end of the data string is indicated by the data byte 00H. Add the set of readings. The answer may be larger than FFH. Display the entire sum at PORT1 and PORT2 or store the answer in the memory locations XX70 and XX71H. Data(H) 32, 52, F2, A5, 00
Convert your name to binary. Begin your first and last name with a capital letter and use lowercase letters for the remaining letters in your name. Put your name in the first column; the ASCII decimal value for each letter of your name in the second column, and the binary number for the decimal equivalent in the remaining columns. Name K le V ↓ n D 0 a n Bit position: Decimal value: Decimal 75 101 118 105 110 32 68 111 97 110 8 7 27 2⁰ 128 64 6 25 32 5 24 16 Binary 4 23 8 3 2² 4 2 2¹ 2 1 1
Create two n-bit codes C1 and C2 (where n is the minimum number of bits) sufficient to uniquely encode each letter (in upper and lower case) of your full name (exclude spaces between first/second/third names). Each letter, even if it repeats in the name (as S repeats in COMSATS), should get only one unique code. No two codes in C1 and C2 should be the same. For example, to encode upper and lower case letters of COMSATS, the binary codes C1 and C2 are given in the Table 1. Sum all the bits of code C2 and produce a sum (S) and a carry (C) bit for each row of code C2 as shown in the table 1. Upper case letters of name Code C1 Lower case letters of name Code C2 SUMing bits of C2 Carry bit (C) Sum bit (S) C 0 0 0 0 c 0 1 1 0 1 0 O 0 0 0 1 o 0 1 1 1 1 1 M 0 0 1 0 m 1 0 0 0 0 1 S 0 0 1 1 s 1 0 0 1 1 0 A 0 1 0 0 a 1 0 1 0 1 0 T 0 1 0 1 t 1 0
please help me. Truth table: Form a Truth Table that has 4 inputs and 4 outputs. The heading of the table should look like this: a2 a1 b2 b1 out4 out3 out2 out1 The table should have 16 rows, corresponding to the 16 different input patterns. Input value a2 corresponds to the left bit of a 2-bit number called a; a1 is the right bit of a. b2 and b1 are the left and right bits of a second 2-bit number called b. The output bits out4 through out1 represent the binary version of the product of a and b -- out4 is the left-most bit of the product, out1 is the right-most bit, etc.Boolean Expression: Form a Boolean Expression for each of the output columns in your table, using the techniques seen in class. You must have 4 separate Boolean Expressions for this part; one each for out1, out2, out3, and out4. Each of your Boolean Expressions should have as many terms (the things being "added" together) as there are 1's in the column for that output bit. Circuit Designs: Create a Logic…
True/False 1. The octal number system is a weighted system with eight digits.2. The binary number system is a weighted system with two digits.3. MSB stands for most significant bit.4. In hexadecimal, 9 + 1 = 10.5. The 1’s complement of the binary number 1010 is 0101.6. The 2’s complement of the binary number 1111 is 0000.7. The right-most bit in a signed binary number is the sign bit.8. The hexadecimal number system has 16 characters, six of which are alphabetic characters.9. BCD stands for binary coded decimal.10. An error in a given code can be detected by verifying the parity bit.11. CRC stands for cyclic redundancy check.12. The modulo-2 sum of 11 and 10 is 100.
Convert the 10-character string Metro≥232. to little endian UNICODE. You may use Google to reference ASCII / Unicode tables for this question. The answer should be the hexadecimal Unicode values. The ≥ is the greater than or equal symbol. Note the period as the last character. Question 3 options: Perform the following subtraction. Provide both the hexadecimal _______ and decimal _______ answer. 17E16 - 8D16 ====== Convert -7110 to 2’s complement in binary ________ and hexadecimal _________
Q1. Create two n-bit codes C1 and C2 (where n is the minimum number of bits) sufficient touniquely encode each letter (in upper and lower case) of your full name (exclude spacesbetween first/second/third names). Each letter, even if it repeats in the name (as S repeats inCOMSATS), should get only one unique code. No two codes in C1 and C2 should be thesame. For example, to encode upper and lower case letters of COMSATS, the binary codesC1 and C2 are given in the Table 1. THEN Q2. Design and implement with logic gates a converter that would convert your name inupper case letters (encoded as C1) to your name in the lower case letters (encoded as C2).Your answer must include the K-maps (one for each output. Avoid creating a K-map for eachgroup) and write the simplified Boolean function underneath each map. Use variables a, b, c,d, ... for the inputs and ... W, X, Y, Z for the outputs. USING NAME: IMRANALI
Q1. Create two n-bit codes C1 and C2 (where n is the minimum number of bits) sufficient touniquely encode each letter (in upper and lower case) of your full name (exclude spacesbetween first/second/third names). Each letter, even if it repeats in the name (as S repeats inCOMSATS), should get only one unique code. No two codes in C1 and C2 should be thesame. For example, to encode upper and lower case letters of COMSATS, the binary codesC1 and C2 are given in the Table 1. Calculate odd and even parity bits of code C2 as shownin the table 1. Q2. Using combinational logic with MSI and LSI, implement the function OP and EP (inTable 1, but for your own full name) with multiplexers.Use variables ...W, X, Y, Z for the inputs and OP (odd parity) and EP (even parity) for theoutputs. The dimensions (sizes) of the multiplexers are dependent on your name. You mustshow the implementation table for each multiplexer.
Q1. Create two n-bit codes C1 and C2 (where n is the minimum number of bits) sufficient touniquely encode each letter (in upper and lower case) of your full name (exclude spacesbetween first/second/third names). Each letter, even if it repeats in the name (as S repeats inCOMSATS), should get only one unique code. No two codes in C1 and C2 should be thesame. For example, to encode upper and lower case letters of COMSATS, the binary codesC1 and C2 are given in the Table 1. Calculate odd and even parity bits of code C2 as shownin the table 1. Q2. Using combinational logic with MSI and LSI, implement the function OP and EP (inTable 1, but for your own full name) with multiplexers.Use variables ...W, X, Y, Z for the inputs and OP (odd parity) and EP (even parity) for theoutputs. The dimensions (sizes) of the multiplexers are dependent on your name. You mustshow the implementation table for each multiplexer. FULL NAME : ABCDEFGHI
Create a 4-bit by 3-bit binary multiplier that multiplies a 4-bit number by a 3-bit number. Note: The 4-bit number should be the multiplicand and the 3-bit number should be the multiplier.
Convert the decimal (base 10) number 63 to a binary (base 2) number that has only the digits '0' and '1'. Binary number: (For example, the decimal number 16 is the same as the binary number 10000; the decimal number 13 is the same as the binary number 1101.)