Roadside Inc. manufactures the Megalite, and is reviewing the product's cost structure. Accounting records show these costs: factory space: $250,000 per year insurance: $47,000 per year supervisor salaries: $125,000 per year materials: $5.00 per lamp direct labor: $2.69 per lamp recycling charge: $0.37 per lamp Roadside Inc sells the Megalite to wholesalers for $13.69 each. Calculate Roadside's contribution margin as percent of selling price on the Megalite. (Rounding: tenth of a percent. Report 25.3%, for example, as "25.3".)
Q: Unit Costs: DM P20 DL 28 Other Variable Expenses Allocated Facility-level Costs 2 10 P60 Total Unit…
A: A: Total cost to make the component Total Variable Cost= Direct Material +Direct Labour+other…
Q: Part P40 is a part used in the production of air conditioners at Jackson Corporation. The following…
A: Net operating income = Desired operating income - fixed costs = 98000-41000*50% = $77,500
Q: a) Prepare the incremental analysis for the decision to make or buy the finials. (b) Should Ralph…
A: Incremental Analysis Incremental analysis compares true cost between available alternatives. This…
Q: A small shop in Bulacan fabricates portable threshers for palay producers in the locality. The shop…
A: Here in this question, we are required to calculate break even point in unit and make a graphical…
Q: Manama Inc. is now producing TVs. The company’s accounting department reports the following costs of…
A: Make or buy decision- The technique of marginal costing helps the management decide whether to…
Q: ou are the Chief Financial Officer of Max Gifts Company. A small company that sells Italian…
A: Contribution margin per unit = Contribution margin/ Number of units sold…
Q: Filtration, Inc. manufactures filters for use in secondary water irrigation systems. The costs per…
A: Workings: Total cost = Direct material + Direct labor + variable overhead + fixed overhead.
Q: Every year Blue Industries manufactures 7,300 units of part 231 for use in its production cycle. The…
A: a) Compute the total relevant cost to make part 231:
Q: This Little Light, Inc. is a manufacturer of lamps. Little Light makes 40,000 units per year of a…
A: Indifference point (IDP) = Differential Fixed costs/Differential Variable cost per unit In other…
Q: Pottery Ranch Inc. has been manufacturing its own finials for its curtain rods. The company is…
A: If the company decides to buy the product from outside only fixed overheads cost will be incurred.
Q: Daffy Duct, Inc., has the capacity to produce 12,000 cases of duct tape per year but only produces…
A: Answer = $5,000 (profit) Computation of additional Operating Income / (Loss) accepting new offer…
Q: Your Company manufactures and sells a single product. The product sells for $1,750 per unit and has…
A: Required number of sales is calculated as sum of fixed cost and desired profit divided by…
Q: Night Glow Inc. recently began production of a new product, the halogen light, which required the…
A: Since we are entitled to answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the…
Q: Abolt Corporation makes 40,000 units per year of a part it uses in the products it manufactures. The…
A: The question is based on the concept of Cost Accounting.
Q: nteliSystems manufactures an optical switch that it uses in its final product. InteliSystems…
A: Formula; Variable costs=Direct material+Direct labor+Varible overhead
Q: Slugger Corporation produces baseball bats for kids that it sells for $36 each. At capacity, the…
A: The decision to accept the special order is taken by calculating the increase in net operating…
Q: Jones Products manufactures and sells to wholesalers approximately 200,000 packages per year of…
A: Special order decisions When deciding the price of products, a company will want to ensure that all…
Q: Canrad Company manufactures Tool A used in its manufacturing cycle at a cost of P36 per unit that…
A: Occurring of circumstances which require key decision making frequently occur in businesses. One…
Q: Slugger Corporation produces baseball bats for kids that it sells for $36 each. At capacity, the…
A: Tactical decision making: Tactical decision making is a process in which the company can choose…
Q: Whispering Winds Pix currently uses a six-year-old molding machine to manufacture silver picture…
A: Net Present Value: It is future cash flows over the entire period of a project that discounted…
Q: ........................................................................................... 80…
A: No, La Salle, Inc. should not accept the offer of outside supplier since it they will have to incur…
Q: The Mad Hatter Company owns a machine that manufactures two types of chimney caps. Production time…
A: The calculation of contribution margin for Cap A and Cap B has been made as follows:
Q: Rutro Corp. makes 59,000 units per year of a part it uses in the products it manufactures. The unit…
A: Make or Buy Decision: A make-or-buy choice is one in which a company decides whether to manufacture…
Q: U-RIDE, Inc. currently produces the electric engines that are used in golf carts made and sold by…
A: Facility-level depreciation and Annual facility-level utilities would not be considered for…
Q: Scott Corporation produces a part that is used in the production of one of its products. The…
A: Solution Concept In a make or buy decision , the cost of making a product is compared to the cost of…
Q: What is the financial advantage (disadvantage) of accepting the outside supplier’s offer?
A: Its Necessary for every manufacturer to analyse whether they need to product internally or buy from…
Q: Terra Nova, Inc. has the capacity to rewire 300 vehicle wiring harnesses per day. The expected…
A: As per the given data, Vehicle bays rent will be a fixed cost because it won’t change with the…
Q: repare an incremental analysis showing whether the company should make or buy the switches. (Enter…
A: calculation for additional cost incurred are as follows:
Q: Regis Company makes the plugs it uses in one of its products at a cost of P36 per unit. This cost…
A: Variable cost per unit = Total costs - fixed overhead = P36 - 8 = P28 per unit
Q: A company is considering buying a part that they currently make for one of their products. The costs…
A: Introduction: The tangible elements that go into creating a product are referred to as direct…
Q: Pottery Ranch Inc. has been manufacturing its own finials for its curtain rods. The company is…
A: Lets understand the basics. When management needs to choose between the make or buy, management…
Q: Slugger Corporation produces baseball bats for kids that it sells for $36 each. At capacity, the…
A: The decision to accept the special order is taken by calculating the increase in net operating…
Q: Riders, Ltd. is a manufacturer that produces motorized scooters. Currently, it is producing the…
A: Avoidable Cost is relevant cost in decision making process. and unavoidable cost is not relevant in…
Q: A small shop in Bulacan fabricates portable threshers for palay producers in the locality. The shop…
A: The question is related to Breakeven point sales. The Breakeven point is that level of sales at…
Q: Every year Riverbed Industries manufactures 7,300 units of part 231 for use in its production cycle.…
A: A make or buy decision is the act of choosing between whether to produce in-house or purchase from…
Q: Roe manufactures and sells cloth facial masks. Per unit direct material and direct labor costs are…
A: Total revenues include sale value from masks. Total costs include both variable and fixed costs
Q: Han Products manufactures 30,000 units of part S–6 each year for use on its production line. At this…
A: Calculate the total cost: Particulars Making cost Purchase cost Direct material (30,000 x $3.6)…
Q: Martin's Company has purchased 20,000 pumps annually from Andres Company. Due to price increasing…
A: Make or buy decision is a part of management accounting in which the total cost of buying the…
Q: HASF Glassworks makes glass flanges for scientific use Material cost $ 1 per flange and the glass…
A: WE KNOW THAT, net operating income = sales - variable cost - fixed cost given that, fixed cost =…
Q: Harcourt Manufacturing (HM) has the capacity to produce 11,800 fax machines per year. HM currently…
A: Variable cost means the cost which vary with level of output where as fixed cost remain fixed. In…
Q: Owly Corporation’s agriculture division currently produces their own soil mix to grow the plants…
A: Cost of Sale is the total cost of units produced & sold. It is the Sum of Prime Cost &…
Q: he James Company manufactures widgets that sell for $120 each. The company's unit cost for each…
A: Solution: Relevant cost of making = Direct materials + direct labor + variable overhead = 30+40 +…
Q: Ancinas Company produces printers and uses a standard part in the manufacture of several of its…
A: Total purchase cost = No. of parts x Purchase cost per part from outside supplier = 43000 x $5.00…
Q: ABC Company makes 50,000 units per vear of a part it uses in the products it manufactures. The unit…
A: >Relevant cost for a decision is that cost that has a feature that makes it ‘relevant’ for the…
Q: A small shop in Bulacan fabricates portable threshers for palay producers in the locality. The shop…
A: Breakeven points may be used in a lot of different situations. The breakeven point in a property,…
Q: Steve company produces 30000 units of parts each year for use on its production line. The cost per…
A: Relevant cost of S6 per unit = Direct material cost + direct labor cost + variable manufacturing…
Q: Every year Blue Industries manufactures 7,300 units of part 231 for use in its production cycle. The…
A: Relevant costs: These are the costs a business computes to decide whether to continue or close a…
Q: Triple X Company manufactures and sells refrigerators. It makes some of the parts for the…
A: Cost of parts = Number of units required each year ×Cost per unit =…
Roadside Inc. manufactures the Megalite, and is reviewing the product's cost structure. Accounting records show these costs:
factory space: $250,000 per year
insurance: $47,000 per year
supervisor salaries: $125,000 per year
materials: $5.00 per lamp
direct labor: $2.69 per lamp
recycling charge: $0.37 per lamp
Roadside Inc sells the Megalite to wholesalers for $13.69 each. Calculate Roadside's contribution margin as percent of selling price on the Megalite. (Rounding: tenth of a percent. Report 25.3%, for example, as "25.3".)
Contribution margin is the excess of selling price over and above the variable cost.
Trending now
This is a popular solution!
Step by step
Solved in 2 steps
- Jonfran Company manufactures three different models of paper shredders including the waste container, which serves as the base. While the shredder heads are different for all three models, the waste container is the same. The number of waste containers that Jonfran will need during the following years is estimated as follows: The equipment used to manufacture the waste container must be replaced because it is broken and cannot be repaired. The new equipment would have a purchase price of 945,000 with terms of 2/10, n/30; the companys policy is to take all purchase discounts. The freight on the equipment would be 11,000, and installation costs would total 22,900. The equipment would be purchased in December 20x4 and placed into service on January 1, 20x5. It would have a five-year economic life and would be treated as three-year property under MACRS. This equipment is expected to have a salvage value of 12,000 at the end of its economic life in 20x9. The new equipment would be more efficient than the old equipment, resulting in a 25 percent reduction in both direct materials and variable overhead. The savings in direct materials would result in an additional one-time decrease in working capital requirements of 2,500, resulting from a reduction in direct material inventories. This working capital reduction would be recognized at the time of equipment acquisition. The old equipment is fully depreciated and is not included in the fixed overhead. The old equipment from the plant can be sold for a salvage amount of 1,500. Rather than replace the equipment, one of Jonfrans production managers has suggested that the waste containers be purchased. One supplier has quoted a price of 27 per container. This price is 8 less than Jonfrans current manufacturing cost, which is as follows: Jonfran uses a plantwide fixed overhead rate in its operations. If the waste containers are purchased outside, the salary and benefits of one supervisor, included in fixed overhead at 45,000, would be eliminated. There would be no other changes in the other cash and noncash items included in fixed overhead except depreciation on the new equipment. Jonfran is subject to a 40 percent tax rate. Management assumes that all cash flows occur at the end of the year and uses a 12 percent after-tax discount rate. Required: 1. Prepare a schedule of cash flows for the make alternative. Calculate the NPV of the make alternative. 2. Prepare a schedule of cash flows for the buy alternative. Calculate the NPV of the buy alternative. 3. Which should Jonfran domake or buy the containers? What qualitative factors should be considered? (CMA adapted)Oat Treats manufactures various types of cereal bars featuring oats. Simmons Cereal Company has approached Oat Treats with a proposal to sell the company its top selling oat cereal bar at a price of $27,500 for 20,000 bars. The costs shown are associated with production of 20,000 oat bars currently. The manufacturing overhead consists of $3,000 of variable costs with the balance being allocated to fixed costs. Should Oat Treats make or buy the oat bars?Roper Furniture manufactures office furniture and tracks cost data across their process. The following are some of the costs that they incur. Classify these costs as fixed or variable costs, and as product costs or period costs. Wood used to produce desks ($125,00 per desk) Production labor used to produce desks ($15 per hour) Production supervisor salary ($45,000 per year) Depreciation on factory equipment ($60,000 per year) Selling and administrative expenses ($45,000 per year) Rent on corporate office ($44,000 per year) Nails, glue, and other materials required to produce desks (varies per desk) Utilities expenses for production facility Sales staff commission (5% of gross sales)
- Markson and Sons leases a copy machine with terms that include a fixed fee each month plus acharge for each copy made. Markson made 9,000 copies and paid a total of $480 in January. In April, they paid $320 for 5,000 copies. What is the variable cost per copy if Markson uses the high-low method to analyze costs?Rolertyme Company manufactures roller skates. With the exception of the rollers, all parts of the skates are produced internally. Neeta Booth, president of Rolertyme, has decided to make the rollers instead of buying them from external suppliers. The company needs 100,000 sets per year (currently it pays 1.90 per set of rollers). The rollers can be produced using an available area within the plant. However, equipment for production of the rollers would need to be leased (30,000 per year lease payment). Additionally, it would cost 0.50 per machine hour for power, oil, and other operating expenses. The equipment will provide 60,000 machine hours per year. Direct material costs will average 0.75 per set, and direct labor will average 0.25 per set. Since only one type of roller would be produced, no additional demands would be made on the setup activity. Other overhead activities (besides machining and setups), however, would be affected. The companys cost management system provides the following information about the current status of the overhead activities that would be affected. (The supply and demand figures do not include the effect of roller production on these activities.) The lumpy quantity indicates how much capacity must be purchased should any expansion of activity supply be needed. The purchase price is the cost of acquiring the capacity represented by the lumpy quantity. This price also represents the cost of current spending on existing activity supply (for each block of activity). Production of rollers would place the following demands on the overhead activities: Producing the rollers also means that the purchase of outside rollers will cease. Thus, purchase orders associated with the outside acquisition of rollers will drop by 5,000. Similarly, the moves for the handling of incoming orders will decrease by 200. The company has not inspected the rollers purchased from outside suppliers. Required: 1. Classify all resources associated with the production of rollers as flexible resources and committed resources. Label each committed resource as a short- or long-term commitment. How should we describe the cost behavior of these short- and long-term resource commitments? Explain. 2. Calculate the total annual resource spending (for all activities except for setups) that the company will incur after production of the rollers begins. Break this cost into fixed and variable activity costs. In calculating these figures, assume that the company will spend no more than necessary. What is the effect on resource spending caused by production of the rollers? 3. Refer to Requirement 2. For each activity, break down the cost of activity supplied into the cost of activity output and the cost of unused activity.Cinnamon Depot bakes and sells cinnamon rolls for $1.75 each. The cost of producing 500,000 rolls in the prior year was: At the start of the current year, Cinnamon Depot received a special order for 18,000 rolls to be sold for $1.50 per roll. The company estimates it will incur an additional $1,000 in total fixed costs in order to lease a special machine that forms the rolls in the shape of a heart per the customers request. This order will not affect any of its other operations. Should the company accept the special order? (Show your work.)
- Dimitri Designs has capacity to produce 30,000 desk chairs per year and is currently selling all 30,000 for $240 each. Country Enterprises has approached Dimitri to buy 800 chairs for $210 each. Dimitris normal variable cost is $165 per chair, including $50 per unit in direct labor per chair. Dimitri can produce the special order on an overtime shift, which means that direct labor would be paid overtime at 150% of the normal pay rate. The annual fixed costs will be unaffected by the special order and the contract will not disrupt any of Dimitris other operations. What will be the impact on profits of accepting the order?Ottis, Inc., uses 640,000 plastic housing units each year in its production of paper shredders. The cost of placing an order is 30. The cost of holding one unit of inventory for one year is 15.00. Currently, Ottis places 160 orders of 4,000 plastic housing units per year. Required: 1. Compute the economic order quantity. 2. Compute the ordering, carrying, and total costs for the EOQ. 3. How much money does using the EOQ policy save the company over the policy of purchasing 4,000 plastic housing units per order?Country Diner currently makes cookies for its boxed lunches. It uses 40,000 cookies annually in the production of the boxed lunches. The costs to make the cookies are: A potential supplier has offered to sell Country Diner the cookies for $0.85 each. If the cookies are purchased, 10% of the fixed overhead could be avoided. If Jason accepts the offer, what will the effect on profit be?
- Hicks Contracting collects and analyzes cost data in order to track the cost of installing decks on new home construction jobs. The following are some of the costs that they incur. Classify these costs as fixed or variable costs and as product or period costs. Lumber used to construct decks ($12.00 per square foot) Carpenter labor used to construct decks ($10 per hour) Construction supervisor salary ($45,000 per year) Depreciation on tools and equipment ($6,000 per year) Selling and administrative expenses ($35,000 per year) Rent on corporate office space ($34,000 per year) Nails, glue, and other materials required to construct deck (varies per job)Watson Wheels currently makes 6,000 wheels annually that are used in other products it manufactures. Current unit costs for the wheels are as follows: Direct materials $22.00 Direct labor 16.00 Variable manufacturing overhead 12.00 Fixed manufacturing overhead 15.00 Total $65.00 The company has an offer from a manufacturer to produce the wheels for $60 per wheel. If the company decides to buy the wheels, the empty warehouse space could be rented for $22,000 annually. In addition, half of the fixed manufacturing overhead costs would be avoided if the company decides to buy the wheels. If the company decides to accept the offer, what is the incremental effect on the company’s net income?Morning Dove Company manufactures one model of birdbath, which is very popular. Morning Dove sells all units it produces each month. The relevant range is 0 to 1,800 units, and monthly production costs for the production of 1,400 units follow. Morning Dove's utilities and maintenance costs are mixed with the fixed components shown in parentheses. Production Costs Direct materials Direct labor Utilities ($150 fixed) Supervisor's salary Maintenance ($330 fixed) Depreciation Suppose it sells each birdbath for $22. Required: 1. Calculate the unit contribution margin and contribution margin ratio for each birdbath sold. 2. Complete the contribution margin Income statement assuming that Morning Dove produces and sells 1,600 units. 4 Complete this question by entering your answers in the tabs below. Required 1 Required 2 Calculate the unit contribution margin and contribution margin ratio for each birdbath sold. Note: Round your intermediate calculations and final answer to 2 decimal places.…