WermWater flows through an adiabatic pumping system at a steady low rato(m) of 3 ke/u The conditions at the iniet are pi00 kPa,T=15 "C, and 0 m, and the conditions at the wxt are500 kPa. T 18 "C, and ay= 200 umv CorrectWalerPart 8200 mUse the SL model to evaluate the punping power (W) Neglect any change in kinetic energyExpress your answer in kilowatts to four significant figures.V AE?vecWatkWSubmitReduestAnswer- Part CWhat-if Scenario What would the pumping power be if the exit temperature were 19"C?Express your answer in kilowatts to four significant figures.AE 1 vec?.Wout=kWSubmitBeauest Answer

Given: For compressor, The mass flow rate of water, m = 3 kg/s The inlet pressure, P1 = 90 kPa The…

Water Bows through an adabatic pumping system at a steady fow ate (h) of a kt/ The conditions at the iniet are p v0 kPa. R-15°C and a0m and the conditions at the wt are 500 kPa. T 18"C, and ay 200 m Puo Ars v Correct Water Part 8 200 m Use the S model h evaluate the pumping power (W) Neglect any change in ketic energy Express your answer in kilowatts to four signiflicant figures vec kW Submit Reest A Part C Whatif Scenario What would the pumping power be if the exit temperature were 19 C Express your answer in kilowatts to four significant figures. VO AE vec We kW Submt Remest Ans

Water Bows through an adabatic pumping system at a steady fow ate (h) of a kt/ The conditions at the iniet are p v0 kPa. R-15°C and a0m and the conditions at the wt are 500 kPa. T 18"C, and ay 200 m Puo Ars v Correct Water Part 8 200 m Use the S model h evaluate the pumping power (W) Neglect any change in ketic energy Express your answer in kilowatts to four signiflicant figures vec kW Submit Reest A Part C Whatif Scenario What would the pumping power be if the exit temperature were 19 C Express your answer in kilowatts to four significant figures. VO AE vec We kW Submt Remest Ans

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An air compressor absorbs 1000 kg of air per hour at a pressure of 100 kPa and 500 kPait presses on the pressure. Specific volume of air at compressor Inlet 0.8 m3/ kg, at Exit0.2 m3/ kg dir. The internal energy of the air at the outlet is 100 kJ/kg more than at the inlet.60 000 kJ/h heat transfer occurs from the compressor to the air. Kinetic and potential energyfind the power needed to operate the compressor, neglecting its changes.
A large water pump takes water from a nearby lake at a rate of 35 f/Sec and rauses its pressure from 7 to 100 psia, with a negligiblymall change in the speific ntermal energy iand the density, So that if can be fed into an rngahon Systemo if the pump isG adiabatic and frictionless, delermine the magnitude of the power necessary to drive the pump in hp using 5 signifigant figures. Hint: you need to use an equation for h.
Qs: 1 leg of air is allowed to expand reversibly in a behind a piston in such constant at 2602 lwhile the volume is doubled. The piston iis then moved in, and heat is regected by cylinder that the temp erature vemains away the air reversidly until the volume is the same asit was at constant 0 ini tially. Calculate the net heat flow and the overall change of entropy Sketel the process on T.s diagram. pressure Ans. [-161.9 J -- 0.497 les kg.k
A 650 bhp Diesel Engine with 6 cylinders has a brake thermal efficiency of 36 % and a jacketwater loss of 27%. It uses a closed cooling system with a cooling tower 10 meters high. Thetemperature rise after passing the water jacket is 12 °C and the cooling tower range is 5 °C. Make asketch showing the vital parts of the cooling tower system and calculate:a) capacity of the jacket water pump in GPMb) exhaust loss if the friction, radiation and other losses total 8%.c) cooling water flow rate in the cooling tower in liter/hrd) standard size electric motor to drive the raw water pump if the total dynamic head is 35 meters and the pump efficiency is 84%
Pls. Answer this..? A steam engine has 10% brake thermal efficiency and consumes 750 kg/hr steam. The enthalpy of steam at the entrance ang exit of the engine and condenser are 2800 and 450 kj/kg repectively. Determine the brake power of the engine in kw.
.The refrigerant volume flow rate at the entrance of compressor wereobtained from a test on a twin cylinder single acting 15 cm x 20 cm, 320 rpmcompressor ammonia refrigerating plant 33 L/s. Determine the volumetricefficiency of the compressor.
A air Compressor lequires a power input Of 1400 kW andask It Operates adialatically. The air İS compressed from 300 K and atmosp heric pressure to an exit presure of 20 atm, and the air leaves he comp ressor at a speed of 200 m/SecT DAssume that the air is an ideal gas and the inlet velocitey is m negligibly small, but do not ašsume that the specific heats rl are čonstant. if the mass flow rate is 2 kg/sec, calculate it the air temperature at the exit in figires. wsing 5 synifigant °C
I kg of steam in a g linder expands reversi bly be hiroh piston If the steam is intitially dry Saturated, find the final temperature a ccording to a law = Gonstant> from 7 to 1 barr a a , the work done by r the steam, and the heat Plow to or from Cy lider wall .
A single-stage reciprocating air compressor has two double acting cylinders each 46 cm diameter and 36 cm stroke and the piston rods are 50 mm diameter. The intake and discharge pressures are 101.325 kPa and 445 kPa, respectively, and the speed is 257 RPM. If the volumetric efficiency is 78%, the isothermal efficiency is 66%, mechanical efficiency is 94%, Actual Indicated Power, in kW is close to: 225.87 90.24 180.48 120.21 110.21
Water vapor enters a continuous flow turbine with 6 MPa pressure, 450oC temperature and 80 m/s velocity with a flow rate of 900 m3/h, saturated at 20 kPa pressure.It comes out as steam at a speed of 140 m/s. There is a heat transfer of 5 kW from the turbine to the environment and the turbine inlet section is 150 cm above the outlet section.as it is;a) Find the power produced in the turbine. b) Calculate the adiabatic efficiency of the turbine.
1.A gas is undergoing an isothermal process the pressure ratioof the final to the initial state is 2.5 and the cylinder it is stored in is initially2ft3. Find the lengthof stroke(in)if the area of the cylinder is 30in2 2.A cylinder compresses gas isothermally and it 3.Adiesel engine powers a boat. Theengine’s cylinderseachhavea compression ratio(Vmax/Vmin)of 12 and the Vmax is 4ft3.If 1 cylinderis in the isobaric compression stroke,find the final temperature if the initial temperature is 540F 4.A cylinder is heated to cause a piston to move upwards using the expansion of gas inside it. If pressure remains constant, and the initial and final temperatures are 500R and 700R respectively, how much willthe piston move up(in)if the initial volume is 1ft3, and the area of cylinder is 60in2?Neglect the weight of the piston. 5.Agas tank is accidentallyplaced near a heat source. Its bourdon pressure gaugereading was initially 30kpag but after some time the reading became 50kpag. Find the final…
The radiator of an air-water cooled Diesel engine has a surface area of 10 m. Water at 90°C enters at 1 kg/s rate and leaves at 60 °C. Air at 30 C is forced through the radiator by an air fan and leaves the radiator at 45 C. Find: 5. a. Amount of heat transferred b. The value of overall heat transfer coefficient, U с. Amount of air forced through the radiator Cwater 4.18 kJ/kg.K, Cair= 1.007 kJ/kg.K