Water is moving at a speed of 2.05 m/s through a hose with an internal diameter of 1.85 cm. What is the flow rate, in liters per second? The fluid speed in this hose’s nozzle is 15.0 m/s. What is the nozzle’s inside diameter, in centimeter?

Water is moving at a speed of 2.05 m/s through a hose with an internal diameter of 1.85 cm. What is the flow rate, in liters per second? The fluid speed in this hose’s nozzle is 15.0 m/s. What is the nozzle’s inside diameter, in centimeter?

College Physics

1st Edition

ISBN:9781938168000

Author:Paul Peter Urone, Roger Hinrichs

Publisher:Paul Peter Urone, Roger Hinrichs

Chapter12: Fluid Dynamics And Its Biological And Medical Applications

Section: Chapter Questions

Problem 13PE: Water is moving at a velocity of 2.00 m/s through a hose with an internal diameter of 1.60 cm. (a)...

See similar textbooks

Related questions

Q: A large storage tank, open to the atmosphere at the top and filled with water, develops a small hole…

A: According to Bernoulli's equation of motion, P+12ρV2+ρgh=constant where P=pressure energy per unit…

Q: A large container, 122 cm deep is filled with water. If a small hole is punched in its side 81.0 cm…

Q: Pure water flows through a horizontal artery. At the wide end its speed is 40 cm/s and the…

A: According to Bernoulli's equation of conservation of energy for fluids P1+12ρV12+ρgh1=P2+12ρV22+ρgh2…

Q: The venturi meter is a device used to measure the speed of a fluid in a pipe.the cross sectional…

Q: Water flowing through a garden hose of diameter 2.78 cm fills a 21.0 L bucket in 1.60 min. (a) What…

A: Use the concepts of water flow through a hose pipe.

Q: A large container, 122 cm deep is filled with water. If a small hole is punched in its side 93.0 cm…

A: The given values are,

Q: A round pipe of varying diameter carries petroleum from a wellhead to a refinery. At the wellhead,…

A: Given: At wellhead d1 = 0.539m ,v1 = 10.5m/s At refinery v2 = 6.13m/s , d2 =?

Q: A horizontal pipe narrows from a radius of 0.220 m to 0.110 m. If the speed of the water is 1.50 m/s…

A: Given data: Radius of Larger pipe (r1) = 0.220 m Radius of smaller pipe (r2) = 0.110 m Speed of…

Q: What is the final speed of the fluid in a pipe with an initial diameter is 10 cm and the final…

A: Given, The initial speed V1 = 3 m/s Final speed V2 =? initial diameter is d1 = 10 cm final diameter…

Q: Water flowing through a garden hose of diameter 2.79 cm fills a 25.0 L bucket in 1.10 min. (a) What…

A: Given data: Diameter, d = 2.79cm Time, T = 1.10min Velocity, v = 25L

Q: A large storage tank, open to the atmosphere at the top and filled with water, develops a small hole…

A: Depth below the water level, h = 13.4 mFlow rate, Q = 2.9×10-3 m3/minAcceleration due to gravity, g…

Q: Water is moving at a speed of 1.95 m/s through a hose with an internal diameter of 1.4 cm. Part…

Q: Drawn below is a large tank of water with density 1000 kg/m'. A pipe with a diameter of 0.05 m is…

A: Solution: As given in teh question denisty of water = 1000 kg/m3 pipe diamter = 0.05 m\ h = 5 m…

Q: A nozzle with an area of 0.3 cm² is attached to a garden hose with an area of 1.5 cm². The flow rate…

A: The expression for flow rate is, Q=Av (I) A=area,v=velocity,Q=flow rate The…

Q: Water is moving at a velocity of 1.50 m/s through a hose with an internal diameter of 1.60 cm. (a)…

Q: A large storage tank, open at the top and filled with water, develops a small hole in its side at a…

A: a) The required speed of at which the water leaves the hole is,

Q: Water flowing through a garden hose of diameter 2.72 cm fills a 22.0-L bucket in 1.45 min. (a) What…

Q: In a tube "U" we have water (density equal to 1,000 kg / m3) and a strange fluid. If the height at…

A: Given data The density of water is given as ρw=1000 kg/m3. The height the water reaches is hw =…

Q: Ps nd the speed (in m/s) of the gasoline as it leaves the hose. m/s nd the fluid flow rate in cubic…

Q: An incompressible fluid flows steadily through a pipe that has a change in diameter. The fluid speed…

A: Radius of one end R1 = 4 cm = 0.04 m Velocity V1 = 1.28 m/s Radius of other end R2 = 2 cm = 0.02 m…

Q: Water flowing through a garden hose of diameter 2.76 cm fills a 23.0-L bucket in 1.20 min. (a) What…

A: (a) The volume rate is given by, Vt=AvVt=πd22v The formula for speed of water at the end of the hose…

Q: What is the greatest average speed (in m/s) of blood flow at 37° C in an artery of radius 1.70 mm if…

A: Radius (r) = 1.70 mm r = 1.70 × 10-3 m Diameter (d) = 2 ×1.70 × 10 -3 m…

Q: What is the volume rate of flow of water from a 1.85-cm-diameter faucet if the speed of the fluid is…

Q: a) What is the speed of the water in the hose in cm/s? (1 L= 1000 cm3) cm/s b) What is the…

Q: Water flows through a pipe. At point A the pipe has area 8 cm? and the water has velocity 5 cm/s. At…

Q: A cylindrical tank has a radius of 0.15 m and a pipe 0.23 m below the original water level through…

A: Apply Bernoulli's theorem at the top of cylindrical tank and pipe. P1+12ρv12+ρgh1=P2+12ρv22+ρgh2…

Q: A Styrofoam cylinder, filled with water, sits on a table. You then poke a small hole through the…

Q: Water is moving at a velocity of 2.00 m/s through a hose with an internal diameter of 1.60 cm. (a)…

A: velocity, V = 2 m/s internal diameter, D = 1.6 cm Velocity, v = 15 m/s

Q: Water is moving at a speed of 2.2 m/s through a hose with an internal diameter of 1.55 cm. a.…

Q: A large storage tank, open at the top and filled with water, develops a small hole in its side at a…

Q: a venturi tube is a narrowed constriction or throat in an otherwise uniform pipeline. The fluid…

A: Solution: Given: d1 = diameter of tube = 3.50 cm v1 = velocity of fluid in tube = 7.10 m/s d2 =…

Q: Liquid flows through a pipe of diameter 3.00 cm at 1.50m/s. a)Find the volume flow rate. b)There…

Q: A horizontal pipe widens from a radius of 0.110 m to 0.240 m. If the speed of the water is 1.30 m/s…

A: Write the equation of continuity of fluids.

Q: Water flows through a pipe of cross-sectional area, A, with a speed of 4 m/s. The pipe then narrows…

A: According to the equation of continuity Av = constant. Where A=cross-sectional area v=velocity…

Q: Water is flowing in a pipe with a varying cross-sectional area, and at all points, the water…

Q: Water is moving at a velocity of 2.50 m/s through a hose with an internal diameter of 1.60 cm. (a)…

Q: Water is moving at a speed of 1.75 m/s through a hose with an internal diameter of 1.35 cm. Part…

Q: Water is moving at a velocity of 2.50 m/s through a hose with an internal diameter of 1.60 cm. (a)…

Q: When connected to a standpipe, a fire hose 5.29 cm in diameter must deliver a minimum flow rate of…

A: Given Data, Diameter of the fire hose (d)= 5.29 m Flow rate of water (Q)=1.00 ✕ 103 L/min

Q: A fluid with a density of 920 kg/m³ and an absolute viscosity of 1.75x103 kg/m s is passing thru a…

Q: Water flows through a pipe of cross-sectional area, A, with a speed of 4 m/s. The pipe then widens…

A: Given that, initial value of cross sectional area and velocity and also given the final value of…

Q: A pipe of cross sectional area 2.34 m2 narrows while splitting into three pipes, each of…

Q: A cylinder, filled with water, contains a small hole through the side of the cylinder, 45 cm below…

A: According to the law of conservation of energy , energy can neither be created nor destroyed but…

Q: Pure water flows through a horizontal artery. At the wide end its speed is 40cm/s and the difference…

A: Bernoulli's equation is,…

Q: If a kitchen sink has a volume of 20 L. Water flows in the sink with a mass flow rate of 0.5 kg/s.…

Q: A hydraulic piston has two surfaces which can move when a force is applied to them. On the left…

A: a)The total force on the right side will be,

Q: Water flows through a circular pipe with a radius of 4cm at a speed of 5 m/s.If the radius of the…

Q: Water is moving at a velocity of 1.50 m/s through a hose with an internal diameter of 1.60 cm. (a)…

Q: Consider a fluid with uniform density 2300 kg/m3 within a large container. At a distance of 20…

A: Given data: The uniform density of the fluid is ρ=2300 kg/m3. The position of the surface below the…

Question

Water is moving at a speed of 2.05 m/s through a hose with an internal diameter of 1.85 cm.

What is the flow rate, in liters per second?

The fluid speed in this hose’s nozzle is 15.0 m/s. What is the nozzle’s inside diameter, in centimeter?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Data :

Required :

Analysis :

Answer :

Trending now

This is a popular solution!

Step by step

Solved in 4 steps with 9 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

(a) What is the fluid speed in a fire hose with a 9.00-cm diameter carrying 80.0 L of water per second? (b) What is the flow rate in cubic meters per second? (c) Would your answers be different if salt water replaced the fresh water in the fire hose?
Figure P15.52 shows a Venturi meter, which may be used to measure the speed of a fluid. It consists of a Venturi tube through which the fluid moves and a manometer used to measure the pressure difference between regions 1 and 2. The fluid of density tube moves from left to right in the Venturi tube. Its speed in region 1 is v1, and its speed in region 2 is v2. The necks cross-sectional area is A2, and the cross-sectional area of the rest of the tube is A1. The manometer contains a fluid of density mano. a. Do you expect the fluid to be higher on the left side or the right side of the manometer? b. The speed v2 of the fluid in the neck comes from measuring the difference between the heights (yR yL) of the fluid on the two sides of manometer. Derive an expression for v2 in terms of (yR yL), A1, A2, tube, and mano. FIGURE P15.52
A large storage tank with an open top is filled to a height h0. The tank is punctured at a height h above the bottom of the tank (Fig. P15.39). Find an expression for how far from the tank the exiting stream lands. Figure P15.39
An incompressible, nonviscous fluid is initially at rest in the vertical portion of the pipe shown in Figure P15.61a, where L = 2.00 m. When the valve is opened, the fluid flows into the horizontal section of the pipe. What is the fluids speed when all the fluid is in the horizontal section as shown in Figure P15.61b? Assume the cross-sectional area of the entire pipe is constant. Figure P15.61
Review. The tank in Figure P15.13 is filled with water of depth d = 2.00 m. At the bottom of one sidewall is a rectangular hatch of height h = 1.00 m and width w = 2.00 m that is hinged at the top of the hatch. (a) Determine the magnitude of the force the water exerts on the hatch. (b) Find the magnitude of the torque exerted by the water about the hinges.
(a) What is the density of a woman who floats in freshwater with 4.00% of her volume above the surface? This could be measured by placing her in a tank with marks on the side to measure how much water she displaces when floating and when held under water (briefly). (b) What percent of her volume is above the surface when she floats in seawater?
Figure P15.47 shows a stream of water in steady flow from a kitchen faucet. At the faucet, the diameter of the stream is 0.960 cm. The stream fills a 125-cm3 container in 16.3 s. Find the diameter of the stream 13.0 cm below the opening of the faucet. Figure P15.47
Gasoline is piped underground from refineries to major users. The flow rate is 3.00102 m3/s (about 500 gal/ min), the viscosity of gasoline is 1.00103 (N/m2) s, and its density is 680 kg/m3. (a) What minimum diameter must the pipe have if the Reynolds number is to be less than 2000? (b) What pressure difference must be maintained along each kilometer of the pipe to maintain this flow rate?
Figure 11.35(a) shows the effect of tube radius on the height to which capillary action can raise a fluid. (a) Calculate the height h for water in a glass tube with a radius of 0.900 cm—a rather large tube like the one on the left. (b) What is the radius of the glass tube on the right if it raises water to 4.00 cm?
Liquid toxic waste with a density of 1752 kg/m3 is flowing through a section of pipe with a radius of 0.312 m at a velocity of 1.64 m/s. a. What is the velocity of the waste after it goes through a constriction and enters a second section of pipe with a radius of 0.222 m? b. If the waste is under a pressure of 850,000 Pa in the first section of pipe, what is the pressure in the second (constricted) section of pipe?
A fluid flows through a horizontal pipe that widens, making a 45 angle with the y axis (Fig. P15.48). The thin part of the pipe has radius R, and the fluids speed in the thin part of the pipe is v0. The origin of the coordinate system is at the point where the pipe begins to widen. The pipes cross section is circular. a. Find an expression for the speed v(x) of the fluid as a function of position for x 0 b. Plot your result: v(x) versus x. FIGURE P15.48 (a) The continuity equation (Eq. 15.21) relates the cross-sectional area to the speed of the fluid traveling through the pipe. A0v0 = A(x)v(x) v(x)=A0v0A(x) The cross sectional area is the area of a circle whose radius is y(x). The widening pan of the pipe is a straight line with slope of 1 and intercept y(0) = R. y(x) = mx + b = x + R A(x) = [y(x)]2 = (x + R)2 Plug this into the formula for the velocity. Plug this into the formula for the velocity. v(x)=A0v0(x+R)2
Calculate the Reynolds numbers for the flow of water through (a) a nozzle with a radius of 0.250 cm and (b) a garden hose with a radius of 0.900 cm, when the nozzle is attached to the hose. The flow rate through hose and nozzle is 0.500 us. Can the flow in either possibly be laminar?