You are a civil engineer who has been given the task to monitor the excavation of a road construction. It is deemed viable that it typically takes half-an-hour to excavate a cubic meter of soil using a typical backhoe which applies to soils within a two-meter depth from its NGL. This parameter includes hauling, piling, and other small movements within the area bound for excavation. Given that the volume to be excavated is 39.5m in your specified road station using only one backhoe, determine the exact total cost for this setup if the backhoe rent costs Php2465 per hour which includes its gasoline and other daily maintenance costs. The hourly-wage paid to these two workers at every end of their daily shift is taken as Php99.8 for the backhoe operator and Php43.2 for the backhoe spotter. For work-life balance, you always make sure that there's only eight-working-hours per day with no overtimes and no work during Sundays for all your workers. Note that the total cost does not include your salary as a civil engineer for the project and would not include any additional allowances for any of its equipment/labor costs. Base your final answer to the exact total working hours for this activity.

You are a civil engineer who has been given the task to monitor the excavation of a road construction. It is deemed viable that it typically takes half-an-hour to excavate a cubic meter of soil using a typical backhoe which applies to soils within a two-meter depth from its NGL. This parameter includes hauling, piling, and other small movements within the area bound for excavation. Given that the volume to be excavated is 39.5m in your specified road station using only one backhoe, determine the exact total cost for this setup if the backhoe rent costs Php2465 per hour which includes its gasoline and other daily maintenance costs. The hourly-wage paid to these two workers at every end of their daily shift is taken as Php99.8 for the backhoe operator and Php43.2 for the backhoe spotter. For work-life balance, you always make sure that there's only eight-working-hours per day with no overtimes and no work during Sundays for all your workers. Note that the total cost does not include your salary as a civil engineer for the project and would not include any additional allowances for any of its equipment/labor costs. Base your final answer to the exact total working hours for this activity.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

You are a civil engineer who has been given the task to monitor the excavation of road construction, It is deemed viable that it typically takes half an hour to excavate a cubic meter of soil using a typical backhoe that applies to solls within a two- meter depth from its NGL. This parameter includes hauling, piling, and other small movements within the area bound for excavation. Given that the volume to be excavated is 36m in your specified road station using only one backhoe, determine the exact total cost for this setup if the backhoe rent costs Php1800 per hour which includes its gasoline and other daily maintenance costs. The hourly wage paid to these two workers at every end of their daily shift is taken as Php101 for the backhoe operator and Php41 for the backhoe spotter. For work-life balance, you always make sure that there are only eight working hours per day with no overtime and no work on Sundays for all your workers. Note that the total cost does not include your salary as…
The answer is 3830.43 LCM 6. As part of a road construction project, an excavation that is 2km long by 3m wide and 0.5m deep must be backfilled and compacted. The excavation will be backfilled with sand and gravel. What volume of (in LCM) of sand and gravel must be brought to site to complete this job?
Estimate the time required (in hours) for a dragline to excavate material to be placed and compacted on a parking lot construction site, where 7200 CCM of material is needed. Use the following information: Dragline size = 1.53 m³ Swing angle = 90° 4 Average depth of cut - 3.36 m Material sand and gravel Job efficiency = 45 min/h Soil shrinkage 12% Your Answer: Answer
a) Evaluate the performance of excavation in civil engineering works
An approach road for a bridge needs 60000 m3 of soil compacted to a void ratio of 0.7. There are two borrow pits A and B from where the required soil can be taken and transported to the site. The borrow pit A has void ratio 0.85 and borrow pit B has void ratio 0.95. If the cost of excavation of soiland transportation is Rs. 20/10 m3for area A and Rs. 22/10 m3for area B, which of the borrow area is more economical? G=2.67
You've been tasked with deriving a site-specific shrinkage factor for earthwork planning on your firm's current project. You have completed a test pit (shallow excavation of quantifiable volume) in the planned on-site borrow area. The excavated earth was loaded into dump trucks and weighed at a nearby truck scale, to measure the total moist weight of the earth removed from the test pit. The rectangular cuboid-shaped test pit had side dimensions of 10 ft by 6 ft by 3 ft, and contained a total excavated earth moist mass of 10.35 tons. The owner's geotechnical investigation report contains a laboratory test report indicating that the on- site borrow soil will attain a moist unit weight of 130.0 pcf (i.e., lbs/CF), when compacted to the minimum allowable compaction specification. 8. What is the on-site borrow soil's bank unit weight (nearest 1 lbs/BCY)? 9. What is the anticipated % net decrease in volume for the on-site borrow soil in a compacted condition (nearest 0.1%)? 10. If the…
Question#1: Explain the Tri axial Shear test in your own words. Question#2: Describe the practical applications of consolidated-drained analysis for clay soil. Kindly solve both questions
Q#2 During excavation processes as a civil engineer what types of precautions should be taken and what are its types .
Indicate the general advantages and disadvantages associated with hydraulic fill placement methods.
the excavated soil? 5.9 A proposed embankment fill requires 3500 m' of compacted soil. The void ratio of the compacted fill is specified as 0.65. Four borrow pits are available, as described in the following table, which lists the respective void ratios of the soil and the cost per cubic meter for moving the soil to the proposed construction site. Make the necessary calculations to select the y not be copied, scanned, or duplicated, in whole or in part. Due to electronic rights, some third party content may be suppressed from the eBook and/or eChapter(s). I materially affect the overall learning experience. Cengage Learning reserves the right to remove additional content at any time if subsequent rights restrictions require it. ction from which the soil should be bought to minimize the cost. Assume G, pe the same at all pits. Borrow pit Void ratio Cost (S/m) 0.85 1.2 0.95 10 0.75 ABCD
What is unconsolidated-un drained test? Explain the practical applications of CD analysis of Clay. Both answers should be in your own words
How do you determine amount of material (embankment cubic yards) that is needed to build an engineered fill portion? Only given information: square footage of slab on grade: 16" deep in-situ wet density: pcf in-situ moisture content: % required compaction: 95% as well as a distribution report and compaction test report I just need equations to find this out please.