A thin rectangular plate is uniformly, deformed, as shown. Determine the shear strain yy at P. Assume a = 17 in., b = 31 in., c = 0.19 in, %3D and d = 0.23 in. S b P a Answer:Yy = i prad.
Q: A 11 in. inner diameter, 0.35 " wall thickness pipe is under a pressure of 2.5 ksi where strain…
A: Given: The diameter of the pipe, d = 11 in The thickness of the pipe, t = 0.35 in The internal…
Q: 982. The strain components at a given point are x = -533 x 10, 6, = 67 x 10-6, and Y = -626 X 106.…
A: To find The stress components on the face whose normal is 45° from the X axis. Given The strain…
Q: 7.5-1 A rectangular steel plate with thickness 1 = 16 mm is subjected to uniform normal stresses o,…
A: The stresses in the plate can be calculated using the following equations- εx=σxE-μσyEεy=σyE-μσxE…
Q: The strain rosettes shown in Figures P13.50 were used to obtain normal strain data at a point on the…
A:
Q: Problem E E V P13.50 -840 He -1,775 ue 665 ue 9,000 ksi 0.24
A: Given, εa = -840 μεεb = -1775 μεεc = 665 μεE = 9000 ksi v = 0.24 From figure, θa = 0°θb = 60°θc =…
Q: For part d, we introduce a wall at cross-section A. Determine the absolute maximum shear stress on…
A:
Q: 10 ksi, o, = -4 ksi, and 29 x 103 ksi and poissons ratio is 0.3, determine the normal strain along…
A:
Q: A thin triangular plate PQR forms a right angle at point Q. During deformation, point Q moves to the…
A:
Q: New Tab 15MDlxNzMz/a/NDCONZAWMTQYMTK3/details Open wi 3. A rigid member CBD is supported by a…
A:
Q: A thin triangular plate PQR forms a right angle at point Q. During deformation, point Q moves to the…
A: Answer:-
Q: The assembly shown consists of an aluminum shell (E, = 70 GPa, az= 23.6 × 10-6C) fully bonded to a…
A:
Q: 10 ksi, oy -4 ksi, and o, = 8 ksi. Using E = The normal stresses at a point in a steel member are o,…
A: Answer: The normal strain along z is (0.2138 × 10-3) in/in.
Q: Question-2: A solid 20-mm-diameter shaft is subjected to an axial load P. The shaft is made of…
A: The lateral strain is the ratio of the wire's longitudinal diameter change to its lateral diameter…
Q: P I S8 X 18.4 Li L2 Using E= 33 x 106 psi, determine the strain energy due to bending for the steel…
A:
Q: A thin triangular plate PQR forms a right angle at point Q. During deformation, point Q moves to the…
A:
Q: Bars (1) are made of steel [E = 30,000 ksi], and bar (2) is made of an aluminum alloy [E = 10,000…
A:
Q: 40 60 A circle of 200 mm dia. is drawn on a mild steel plate before it is subjected to two mutually…
A: Given, d = Diameter of the circle = 200 mm σx= Normal stress in horizontal direction = 160 MPa σy=…
Q: A AISI 304 steel bar, 5 m long with square section (2x6 mm), is stretched by effect of a applied…
A:
Q: 8- Following are the reading recorded at a point of structure tested by a 60° rosette: Ea =…
A:
Q: A strain gage rosette has been placed on a solid member as shown in in the figure to perform stress…
A: The strain values are given as, ε1=121×10-6ε2=304×10-6ε3=203×10-6 The Poisson's ratio is given…
Q: A thin triangular plate PQR forms a right angle at point Q. During deformation, point Q moves to the…
A:
Q: A thin triangular plate PQR forms a right angle at point Q. During deformation, point Q moves to the…
A:
Q: A pipe has an outside diameter of 0.7 inches and inside diameter of 0.12 inches. A force of 411 lbs…
A:
Q: The strain rosette shown was used to obtain normal strain data at a point on the free surface of a…
A:
Q: A thin triangular plate PQR forms a right angle at point Q. During deformation, point Q moves to the…
A:
Q: In the figure shown, determine the normal stresses at AD • , shearing stress at + and BC bolt D • ,…
A: Solution: The free body diagram of the EDC is shown above, we need to find the reactions RD and RC…
Q: A thin triangular plate PQR forms a right angle at point Q. During deformation, point Q moves to the…
A: Given that: c = 790 mm, u = 1.3 mm, v = 5 mm The angles are α = 24o, and β = 66o It is required to…
Q: uniformly distributed stresses acting on the side faces plate are b = 10 in. t = 0.75 in.., E =…
A: Given data Width (b) = 690mm = 69*10-³m Thickness (t) = 40mm = 40*10-³m E = 41 Gpa = 41*10⁹ V =…
Q: Define the terms shear stress and shear strain, illustrating your answer by means of a simple…
A: given data: shear load=30KN=30000N shear stress of brass not exceed(σb)=50MN/m2=50MPa=50N/mm2 shear…
Q: A thin triangular plate PQR forms a right angle at point Q. During deformation, point Q moves to the…
A: Given data: u=1.4 mm v=5.1 mm c=680 mm α=21o β=69o
Q: 26. If ơ, = 50 ksi, oy = 10 ksi, and Txy = 30 ksi, what is the absolute maximum shear stress for the…
A: Given: The stress along x-axis, σx = 50 ksi The stress along y-axis, σy = 10 ksi The shear stress,…
Q: The coordinates of arectangular lamine ABCD before deformation are: (0,0), (0,100), (150,100),…
A: The give rectangular Lamine ABCD is,
Q: A 60˚ strain rosette measures the following strain at a point on the aluminum skin ofan airplane. ϵ0…
A: Solution:
Q: Consider the state of plain “stress" for the following element. Derive the parametric value for the…
A:
Q: A thin triangular plate PQR forms a right angle at point Q. During deformation, point Q moves to the…
A: Given that: c = 720 mm u = 1.7 mm v = 3.5 mm α = 31o and β = 590 It is required to determine the…
Q: Figure 1. The boiler has an inside diameter of 1800 mm and a wall thickness of 20 mm, and it is made…
A:
Q: Q4) In fatigue test, the specimen constructed as in figure, which its broken at 50118 revolution.…
A:
Q: A thin rectangular plate is uniformly deformed, as shown. Determine the shear strain yy at P. Assume…
A: Given data: a=1350 mmb=850 mmc=1 mmd=1 mm Need to determine the shear strain.
Q: A thin triangular plate PQR forms a right angle at point Q. During deformation, point Q moves to the…
A: Given that: u = 2.0 mm v = 4.2 mm c = 775 mm α = 20o, β = 70o It is required to determine the strain…
Q: A thin triangular plate PQR forms a right angle at point Q. During deformation, point Q moves to the…
A: Please refer to the detailed solution given below, Answer - Shear strain is 4696.37 Micro-Radian
Q: xy = 210 MPa Using the Maximum Shear
A: Given Data⇒ Steel bar σx= 194 MPa σy= 100 MPaζxy= 210 MPa Maximum Shear Stress Theory
Q: B 60 5 in. 8 in. A P 6. Two bars are used to support a load P. When unloaded, AB is 5 in. long, AC…
A:
Q: 3. A long thin walled cylindrical shell, closed at both the ends, is subjected to an internal…
A: Let us consider, Diameter of cylindrical shell = d Thickness of cylindrical shell = t Pressure…
Q: A thin triangular plate PQR forms a right angle at point Q. During deformation, point Q moves to the…
A:
Q: A solid circular bar of steel (G = 78 GPa)transmits a torque T = 360 N ? m. The allowablestresses in…
A:
Trending now
This is a popular solution!
Step by step
Solved in 2 steps with 2 images
- An clement of material in plane strain (see figure) is subjected to strains ex= 480 × 10-6, Ey= 70 × l0-6, and yxy= 420 × l0-6. Determine the following quantities: (a) the strains for an element oriented at an angle 0 = 75°, (b) the principal strains, and (c) the maximum shear strains. Show the results on sketches of properly oriented elements.During a test of an airplane wing, the strain gage readings from a 45° rosette (see figure) are as follows: gage A, 520 × l0-6; gage B. 360 × l0-6; and gage C,-80 × 10-6. Determine the principal strains and maximum shear strains, and show them on sketches of properly oriented elements.A rubber ball (sec figure) is inflated to a pressure of 65 kPa. At that pressure, the diameter of the ball is 240 mm and the wall thickness is 1.25 mm. The rubber has a modulus of elasticity E = 3,7 MPa and Poisson's ratio v = 0.48. (a) Determine the maximum stress and strain in the ball, (b) If the strain must be limited to 0.425, Find the minimum required wall thickness of the ball.
- (a) Solve part (a) of the preceding problem if the pressure is 8.5 psi, the diameter is 10 in., the wall thickness is 0,05 in., the modulus of elasticity is 200 psi, and Poisson's ratio is 0.48. (b) If the strain must be limited to 1.01, find the maximum acceptable inflation pressureA wine of length L = 4 ft and diameter d = 0.125 in. is stretched by tensile forces P = 600 lb. The wire is made of a copper alloy having a stress-strain relationship that may be described mathematically by =18,0001+30000.03(=ksi) in which is nondimensional and has units of kips per square inch (ksi). (a) Construct a stress-strain diagram for the material. (bj Determine the elongation, of the wire due to the Forces P. (c) IF the forces are removed, what is the permanent set of the bar? (d) If the forces are applied again, what is the proportional limit?A circular cylindrical steel tank (see figure) contains a volatile fuel under pressure, A strain gage at point A records the longitudinal strain in the tank and transmits this information to a control room. The ultimate shear stress in the wall of the tank is 98 MPa, and a factor of safety of 2,8 is required. (a) At what value of the strain should the operators take action to reduce the pressure in the tank? (Data for the steel are modulus of elasticity E = 210 GPa and Poisson's ratio v = 0.30.) (b) What is the associated strain in the radial direction
- The normal strain in the 45n direction on the surface of a circular tube (sec figure) is 880 × 10 when the torque T = 750 lb-in. The tube is made of copper alloy with G = 6.2 × 106 psi and y = 0.35. If the outside diameter d2of the tube is 0.8 in., what is the inside diameter dt? If the allowable normal stress in the tube is 14 ksi, what is the maximum permissible inside diameter d?Solve the preceding problem if the diameter is 480 mm, the pressure is 20 MPa, the yield stress in tension is 975 MPa, the yield stress in shear is 460 MPa, the factor of safety is 2,75, the modulus of elasticity is 210 GPa, Poissorfs ratio is 0.28, and the normal strain must not exceed 1190 x 10" . For part (b), assume that the tank thickness is 8 mm and the measured normal strain is 990 x 10~ .Solve the preceding problem if the cross- sectional dimensions are b = 1.5 in. and h = 5.0 in., the gage angle is ß = 750, the measured strains are = 209 × 10-6 and B = -110 × 10, and the material is a magnesium alloy with modulus E = 6.0 X 106 psi and Poisson’s ratio v = 0.35.
- An element of material in plain strain is subjected to strains x = 0.0015, , y . = -0.0002, and xy = 0.0003. (a) Determine the strains for an element oriented at an angle = 20°. (b) Determine the principal strains of the element. Confirm the solution using Mohr’s circle for plane strain.An element of aluminum is subjected to tri- axial stresses. Calculate the strains in the element in and directions if the stresses are -20 MPa, 28 MPa, and -18 MPa. respectively. Assume E = 70 GPa and v = 0.33. Also, find the strain energy density of the element.An clement of material subjected to plane strain (see figure) has strains of x=280106 , y=420106 , and xy=150106 . Calculate the strains for an element oriented at an angle = 35°. Show these strains on a sketch of a properly oriented element.