Question 1:The load is supported by the four 304 stainless stell wires that are connected to the rigid membersAB and DC. Determine the angle of tilt of each member after the C (Newton) load is applied.The members were originally horizontal, and each wire has a cross-sectional area of 15 mm?.E304=193 GpaGTake:A=1.8mAmeterB=2.8mC=2503NB meterHD|0.5 m1 m0.9 m- 0.5 m|1.5 mC NSolution:0.5mlmFDEFCF0.5 m1 mPäge-11.5mFAH0.5mto0.5 mInternal Forces in the wires :EM, = 0; 2FRG -C(1.5)=0УF, 3D 0; Fан + Fва — С%3D0F,FBGNAFAH =NFCFEM, = 0; 1.5Fcr -0.5FH = 0EF, = 0; FDE + FeF – FAH = 0FDENDisplacement :8,ттFeLCF8c =ттAcEтт11.58, = 8 +8c =тmtan a =a• Ans1500FAHLAHA AEO ALH =тт8 = 8µ+84H =тmFBGLBG8, =ттABGEtan B =B =Ans2000I| ||I| ||

To determine the angle of tilt.

Question 1: The load is supported by the four 304 stainless stell wires that are connected to the rigid members AB and DC. Determine the angle of tilt of each member after the C (Newton)load is applied. The members were originally horizontal, and each wire has a cross-sectional area of 15 mm?. E304=193 Gpa E Take: A= 1.8 m meter B= 2.8 m C= 2503 N B meter |0.5 m 1 m 0.9 m B -0.5 m| 1.5 m Solution: E E Z

Question 1: The load is supported by the four 304 stainless stell wires that are connected to the rigid members AB and DC. Determine the angle of tilt of each member after the C (Newton)load is applied. The members were originally horizontal, and each wire has a cross-sectional area of 15 mm?. E304=193 Gpa E Take: A= 1.8 m meter B= 2.8 m C= 2503 N B meter |0.5 m 1 m 0.9 m B -0.5 m| 1.5 m Solution: E E Z

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

E. Rigid bar AD is horizontal before the weight of 112 lb is applied to the end of wire BC at C. The wires have a radius of 0.025" and are made of A913 steel. Determine the rotation of AD and how far C will move down due to application of the weight See Appendix of text for any material properties needed. Ans: 0.00071 radians 3 ft - 2 ft -3 ft- D B 4 ft W
Displacement Displacement : FDELDE ApgE %3| mm Sc = CF mm ACFE mm 1 1.5 8 = 8p + 8c mm tan a = α- Ans 1500 AH A/H mm 8 = S +84H mm BG BG mm tan B = B = Ans 2000
The figureshows a copper rod that is placed in an aluminum tube. The rod is 0.005 in. longer than the tube of length L = 10.3 in. Find the maximum safe load P (in lb with four decimal places) that can be applied to the bearing plate, using the following data: area of copper = 2.98 sq, in. area of aluminum = 3.17 sq, in. E of copper = 17066931 ksi E of aluminum = 10016839 ksi allowable stress for copper = 19002 ksi allowable stress for aluminum = 10966 ksi
F1=603N F2 =818N show a detailed solution please
300lb -800lb 30 30 -200lb 600lb FORCE Ibs F= F.Cos(e) F = F.Sin(e)
3. At temperature T₁, the two rigidly connected rods just fit the rigid supports. If both sections are identical except for the diameter, prove that the following equations are true when temperature rises to T₂. a. F= b. OAB C. OBC A x(T₂-T₁)лd²E 20 x(T₂-T₁)E 5 9x(T₂-T₁)E 5 -1/2- d B 1/12- d C
Q2: A spacer is turned from Aluminum alloy with elasticity modulus of 78 GN/m?. The spacer has a diameter of 28 mm and a length of 245 mm. both measurements being made at 20°C. The temperature of the spacer is then increased to 100 °C, the natural expansion being entirely prevented. Taking the coefficient of linear expansion to be 18 x 106 /0C. Determine the compressive load on the spacer. A - 62.63 kN B - 67.12 kN C - 69.16 kN D - 71.82 kN
Question 1 A tensile load of 40 kN is acting on a rod of diameter 40 mm and of length 4 m. A bore of diameter 20 mm is made centrally on the rod. To what length the rod should be bored so that the total extension will increase 30% under the same tensile load. Take E = 2 x 10$ N/mm2.
The two angle bars are used to support a tensile load "T". Assume the tensile load to be equally resisted by each angle. 400 mm x 20 mm THK Gusset Plate The steel used is L 6 x 6 x 1. Properties: A = 7096.76 mm? y = 47.244 mm Fy = 248 MPa Fu = 400 MPa b = 152.4 mm b. t = 25.4 mm x = 47.244 mm Effective hole diameter = 25 mm y Use case 2 for shear lag factor. Use NSCP 2015 code. 1. Determine the maximum allowable load that can be carried by the two L6 x 6 x1 based on yielding of the gross section--- 2. Determine the maximum factored load that can be carried by two L6 x 6 x 1, based on the fracture of the effective net area.---- 3. Determine the maximum allowable tensile load that can be carried.------ 4. Determine the maximum factored tensile load that can be carried-- bo
t=10 mm b=240 mm F.S=1.9 σall=230 MPa
Determine the total elongation of the figure shown. Use E1 = 70 GPa, and E2 = 100 GPa 0.5 m 1.0 m F = 175 kN D2₂ = 0.06 m D₁ = 0.12 m side view 0.075 mm 0.73 mm 1.2 mm O 3.0 mm O None of the above end view
Q2: A 75 mm diameter compound bar is constructed by shrinking a circular brass bush onto the outside of a 45 mm diameter solid steel rod. If the compound bar is then subjected to an axial compressive load of 170 kN, determine the load carried by the steel rod. The modulus of elasticity for steel, Es = 200 GN/m², and brass, Es = 100 GN/m². A - 85000 N B - 90000 N C - 87000 N D - 93000 N