WaterD/23.VWhat is the hydrostatic pressure (Pa) at point (2). Do naot write the unit.2207.25How high (L) will the water rise in the vertical leg relative to the level of the water surface ofthe stream (m). Do not write the unit.0.4537What is the stagnation pressure at point 3, (Pa). Do not write the unit.6707.25What is the dynamic pressure at point 3, (Pa). Do not write the unit. A stagnation tube is inserted into a flowing stream of water with one opening directed upstream and the otherend vertical. If the water velocity is 2.5 m/s, water density 1000 kg/m, g= 9.81 m/s, and If D = 0.5 m.Answer the following:

Answered: Image /qna-images/answer/7649e294-f070-421c-a317-60a393c6784c.jpg

Water 3. V D/2 2- 1 What is the hydrostatic pressure (Pa) at point (2). Do not write the unit. 2207.25 How high (L) will the water rise in the vertical leg relative to the level of the water surface of the stream (m). Do not write the unit. 0.4537 What is the stagnation pressure at point 3, (Pa). Do not write the unit. 6707.25

Water 3. V D/2 2- 1 What is the hydrostatic pressure (Pa) at point (2). Do not write the unit. 2207.25 How high (L) will the water rise in the vertical leg relative to the level of the water surface of the stream (m). Do not write the unit. 0.4537 What is the stagnation pressure at point 3, (Pa). Do not write the unit. 6707.25

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A cylindrical container with a massless and frictionless piston is filled with water up to a height h, as shown in the schematic. What mass m should be placed on the piston so that the water flow rate through the opened valve doubles? Consider that piston area A1 = 0.04 m2, valve area Az = A1/5, h = 1.2 m, Pwater = 1000 kg/m', and g = 9.80 m/s?. piston area: A m = ? valve area: A, h/5 Select one: O a. m = 0.48 kg O b. m 0.71 kg Oc. m = 0.80 kg O d. m = 0.83 kg
Question 2: A fluid with density 1 kg/m' is moving through a pipe with same cross-sectional area at a velocity of 1.2 m/s at pointl and 1.5 m/s at point 2, and point 2 above point 1 in the elevation with 3 cm. If the pressure at the beginning at point lis 116 Pa, what is the pressure of fluid at point 2? What is the mass and volume flow rate at point 2? 2 1
6-22 A 90° elbaw is used to direct water flow at a rate of 25 kgis in a horizontal pipe upward. The diameter of the entire elbow is 10 cm. The elbow discharges water into the atmosphere, and thus the pressure at the exit is the local atmospheric pressure. The elevation difference between the centers of the exit and the inlet of the elbow is 35 cm. The weight of the elbow and the water in it is considered to be negligible. Determine (a) the gage pressure at the center of the inlet of the elbow and (b) the anchoring force needed to hold the elbow in place. Take the momentum-flux correction factor to be 1.03. 35 cm Water 25 kg/s
A horizontal fan (such as that shown in example 5.24) pulls in stagnant air (ie. basically stationary air) atatmospheric pressure; the air approaches the fan outlet with speed 44 ft/sec (ie. 30 mph) and with static pressure 0.3 psi. The air flowing through the fan can be assumed to have a constant density of 2.4*10-3 slug/ft3. The air losses due to friction are 0.1 psi (or 6000 ft-lb/slug of air passing from the fan inlet to the outlet). a) Determine the shaft work in ft-lb/slug b) If the fan outlet area is 2 ft2, determine the rate of work on the air.
Water with density Pwater = 1000 kg/m³ flows through a pipe, composed of two reduced in size sections, as shown on the figure. The two sections are Ilinked with a flange connection, and the corresponding diameters are D, = 8 cm and D, = 5 cm. If the velocity in cross-section 1 is v, = 5 m/s, and the readings of the connected liquid manometer is h = 60 cm, determine the reaction force acting over the flange connection. The manometric fluid is mercury, with density Pa-101kPa %3D Mercury Pmercury = 13600 kg/m³.
A 10-cm jet of water issues from a l-m diameter tank, as shown below. Assume that the velocity of the jet is 2gh, where g is the acceleration of gravity. How long will it take for the water surface in the tank to drop from ho = 2 m to hp= 0.5 m - l-m diameter- ho Water 10-cm diameter
A cylindrical tank 0.9 m in radius rests atop a platform 6 m high. Initially the tank is filled with water (p = 1 x 103kg/m3) to a depth ho= 3 m. A plug whose area is 6.3 cm2 is removed from an orifice in the side of the tank at the bottom. What is the speed of the stream as it strikes the ground?
Q.6 Water is coming out to the atmosphere from a converging channel with a velocity of 5 m/s as shown in the figure. At section A, a cylinder of 10 cm diameter containing a friction-less piston attached to a spring having spring constant 500 N/m is connected. The cross-section diameter of the channel at A and B is 2 m and 1 m respectively. Due to the flow the spring is compressed by an amount of 2m Im 5m/s A 184 cm 368 сm C 36.8 сm 18.4 cm
During a trip to the beach (Patm = 101 kPa), a car runs out of gasoline (density is 750 kg/m^3), and it becomes necessary to siphon gas out of another nearby car to a tank of a volume of 4 litres using a hose whose cross-sectional area is 0.2 cm^2. The shown setting is used where L1=0.7 m and L2=2.2 m. Consider point 1 to be at the free surface of gasoline in the tank so that P_1= 1 atm, V_1 ~= 0 since the tank is large relative to the tube diameter. Consider the gravitational acceleration to be 9.81 m/s^2. Using Bernoulli equation, the pressure at point_3 in kPa is: Select one: O a. 72.55 Z3 Ob. 122.34 Gasoline OC. 79.66 siphoning tube L2 Gas tank L1 22 Gas can/
A pump is installed in a pipe system, where at the suction side 1.0 m below the pump, an open manometer reads a vacuum of 20 cm of mercury. The pipe is 10 cm in diameter and the flow is 35 L/s of water. Find the total energy at the location of the manometer, relative to a datum, through the pump. ( WITH FREE BODY DIAGRAM ) CHOIECES: A.2.56 B.-2.72 m C.12.74 m D.-4.67 m
(b) A 90° elbow in a horizontal pipe is used to direct water flow upward at a rate of 40 kg/s, as shown in the Figure 2. The diameter of the entire elbow is 10 cm. The elbow discharges water into the atmosphere, and thus the pressure at the exit is the local atmospheric pressure. The elevation difference between the centres of the exit and the inlet of the elbow is 50 cm. The weight of the elbow and the water in it is considered to be negligible. i) Draw an appropriate control volume for the flow and state all your assumptions clearly. ii) Determine the gage pressure at the centre of the inlet of the elbow iii) Determine the anchoring force needed to hold the elbow in place 50 cm Water 40 kg/s Figure 2
Water at 20°C flows through a 9 cm diameter pipe which has a 180° vertical bend, as in Fig. The total length of pipe between flanges 1 and 2 is 75 cm. When the mass flow rate is 32.67 kg /s, Gauge pressure at p1 = 73 kPa, and p2 = 41 kPa. Neglecting pipe weight, determine the X component ( Shown on figure ) of the force to the nearest N which the flanges must withstand for this flow.