Water is discharging out of a tank via a pipe with length L = 4.2 m and diameter D= 3.5 cm into an unconnected reservoir (note the free-flowing jet starting at the end of the horizontal pipe section in the figure below). The water level in the tank above the centre of the pipe remains constant at H = 4.2 m (see figure below). You can assume a density of waterp= 1001 kg/m³, dynamic viscosity of water u = 0.001 Pa s and acceleration due to gravity 9.81 m/s². You can assume that there are no local losses.

Water is discharging out of a tank via a pipe with length L = 4.2 m and diameter D= 3.5 cm into an unconnected reservoir (note the free-flowing jet starting at the end of the horizontal pipe section in the figure below). The water level in the tank above the centre of the pipe remains constant at H = 4.2 m (see figure below). You can assume a density of waterp= 1001 kg/m³, dynamic viscosity of water u = 0.001 Pa s and acceleration due to gravity 9.81 m/s². You can assume that there are no local losses.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

As shown in the figure below, a cylindrical tank with a hole in the bottom and an air vent in the top is being filled with water. Given the following: Dtank = 4 ft hill = 8 ft NOG height of water in tank when tank is filled Qin = 10 gal/min %3D NOT UPL TO CHE diameter of hole Find: volumetric flowrate into tank EGG EXAM into the tank in slugs/second OT UPS XAM O NOT U EXAM (c) The rate at which the water level in the tank is mass flowrate (in slugs/second) of the water (b) The mass flowrate (in slugs/second) out of the tank UPLOAD TO CHE NOT UPLOAD when the water level reaches the fill height DO NOT UPL rising (in inches/minute) when the water level NOT UPL PLOAD TO CHEGG NOT UPLOAD TO CHEGG EXAM TO CHEGG EXAM OD TO CHEGG UP reaches the filled height то снE LOAD vent Dtank DO DO DO NOT UPLOADTO EXAM EX DO 0 DONOT UPLOA T Dhole G EXAM TO CNGO UPLOA hole mdotout
Water is discharging out of a tank via a pipe with length L = 4.0 m and diameter D = 3.5 cm into an unconnected reservoir (note the free-flowing jet starting at the end of the horizontal pipe section in the figure below). The water level in the tank above the centre of the pipe remains constant at H = 4.0 m (see figure below). You can assume a density of water p = 1002 kg/m³, dynamic viscosity of water u = 0.001 Pa - s and acceleration due to gravity 9.81 m/s?. You can assume that there are no local losses. H L. D a) What is the friction factor of the pipe for a flow rate of Q = 4.0L/s? Provide your answers to 3 decimal places. f = b) For this case, what is the roughness height of the pipe? Provide your answers to 3 decimal places. ke = mm
Find the pressure difference in inlet cross section of water sprayer as shown in the figure (D=10 cm, d=2.5 cm, V= 2.2 m/s). d
2) (30 P) In the figure the V-shaped pipe is filled with water, it is desired that the liquid remains in the tube and not spilled. At what angular velocity can we rotate the axis of symmetry of the tube so that water does not spill when the plug is opened. (cone angle = 60°, pwater= 1000 kg/m³) h = 20 cm 60° plug
The water tank in the figure below stands on a frictionless cart and feeds a jet of diameter 4 cm and velocity 6.2 m/s, which is deflected 63° by a vane.
A tank full of cooking oil has the shape of a paraboloid obtained by rotating a parabola about the vertical axis, such that the tank height is 4 m and the radius at its top is 4 m, see the figure below. a. How much work is required to empty the tank through an 2-m-high outlet pipe at the top of the tank? (The density of the oil is 920 kg/m3 .) b. When a 4,000,000 J of work is done, what is the depth of oil remaining in the tank? 4 m 2 m 4 m
A closed vessel contains water up to a height of 2 m and over the water surface there is air having pressure 8.829 N/cm^2 above atmospher. At the bottom of the vessel there is an orifice of diameter of 15 cm. Find the rate of flow of water from orifice. Take Cd=0.60. 125.75 L/s 135.75 L/s 115.75 L/s 155.75 L/s
A cylindrical tank 0.9 m in radius rests atop a platform 6 m high. Initially the tank is filled with water (p = 1 x 103kg/m3) to a depth ho= 3 m. A plug whose area is 6.3 cm2 is removed from an orifice in the side of the tank at the bottom. What is the speed of the stream as it strikes the ground?
Water is flowing in a fire hose from point A with a velocity of 10 m/s and a pressure of 300 kPa as illustrated in figure below. There is changes in height of 20 m from point A to B. The velocity at point A and B is the same. Use the Bernoulli equation to calculate the pressure of the water at point B and C respectively. The density of water is 1000 kg/m³ and gravity is 9.8 m/s?. VA = 10m/s A = 3m? A Pa = 300kPa h= 20m B C Ac = 6m? Ag = 3m?
The water is flowing through a pipe having diameters 30 cm and 21 cm at sections land 2 respectively. The rate of flow through pipe is 40 litres/s. The section 1 is 7 m above datum and section 2 is 3 m above datum. If the pressure at section 1 is 37 N/cm? , find the following by neglecting losses: (ENTER ONLY THE VALUES BY REFERRING THE UNIT GIVEN IN BRACKETS) ) Area of cross section of section1 (unit in m?) = Area of cross section of section2 (unit in m?) = velocity at section 1 (unit in m/s) = velocity at section 2 (unit in m/s) = (ii) difference in datum head (Unit in m) = Pressure head at section 1 (Unit in m) = pressure head at section 2 (unit in m) =
A spherical water tank with an inner radius of 11 meters has its lowest point 3 meters above the ground. Water is pumped from ground level through an inflow pipe that meets the tank at its lowest point (see figure). Neglecting the volume of the inflow pipe, how much work is required to fill the tank if it is initially empty? Use 1000 kg/m³ for the density of water and 9.8 m/s² for the acceleration due to gravity. dy 11 m (Type exact answers, using à as needed.) inflow pipe Set up the integral that gives the work (in joules) required to fill the tank. Use a vertical axis whose origin corresponds with the center of the sphere and use increasing limits of integration. 3 m
Two chambers, Chamber 1 and Chamber 2 where pressure at chamber 1 p1=70 kPa, at chamber 2 the pressure p2 = 5kPa. There is an orifice between the two chambers with diameter of 6 cm, Cc= 1.00, Cv=0.95 and the head of the liquid(s=2.50) over the orifice is 1.80 m. Find the actual flow rate through the orifice.include your free body diagram.a.35 L/s b.25 L/s c.15 L/s d.45 L/s