Physics Laboratory Manual
4th Edition
ISBN: 9781133950639
Author: David Loyd
Publisher: Cengage Learning
expand_more
expand_more
format_list_bulleted
Question
Chapter 36, Problem 1PLA
To determine
The phase relationship between the current in the resistor and the voltage across the resistor.
Expert Solution & Answer
Answer to Problem 1PLA
Option (c) the current is in phase with the voltage.
Explanation of Solution
For a resistance in series with an alternating current circuit, the direction of the flow of current is not changed due to the resistance. Therefore, the phase of the voltage and the current will be the same.
In other words, the current and voltage raise at the same time and falls at the same time. The minimum and maximum of the current and voltage will be the same.
Conclusion:
- (a) Current does not lead the voltage. Thus, option (a) is incorrect.
- (b) Voltage does not lead the current. Thus, option (b) is incorrect.
- (c) The current and the voltage are in phase with each other. Thus, option (c) is correct.
- (d) Option (c) is correct. Therefore, option (d) is incorrect.
Want to see more full solutions like this?
Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
The waveforms of the voltage and current of a circuit are given by, v = 120 sin 314t and I = 10 sin (314t+n/6) (a) Calculate the value of the resistance and capacitance which are connected in series to form the circuit. (b) Draw waveforms for current and voltage. (c) Calculate power consumed by the circuit.
An A.C. circuit consists of an alternating voltage source and a resistor only. In this circuit ______.
the voltage is in phase with the currentthe voltage leads the current by 90°
the voltage lags the current by 180°
the voltage lags the current by 90°
the voltage leads the current by 180°
Find the time after t = 0 when the instantaneous voltage of 60-Hz AC first reaches the following values: (a) V0 / 2 (b) V0 (c) 0.
Chapter 36 Solutions
Physics Laboratory Manual
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.Similar questions
- Do Kirchhoff’s rules apply to circuits that contain inductors and Capacitors?arrow_forwardIn an oscillating RLC circuit, R = 7.0 L. = 10 mH. And C = 3.0 F. Initially, the capacitor has a charge of 8.0 C and the current is zero. Calculate the charge on the capacitor (a) five cycles later and (b) 50 cycles later.arrow_forwardThe alternating current through the 15 Ω heating element of a toaster produces power at 980 W. Calculate (a) the rms current through the element, (b) peak current, (c) the rms voltage across the element, and (d) the peak voltage.arrow_forward
- A light bulb is rated at 100W for a 220 V supply. Find (a) the resistance of the bulb; (b) the peak voltage of the source; and (c) the rms current through the bulb.arrow_forwardThe peak value of an alternating current in a 1500 W device is 5.4 A. What is the rms voltage across it?arrow_forwardWhich one of the following statements is true about a series circuit ? The current remains the same and the voltages across each comilenent add up to the battery voltage O The current gets less as it goes round the circuit. The currents add up to the total current and the voltage remains the same. The current increases as it goes around the circuit but the voltage decreases to zero.arrow_forward
- A circuit has V = 20 V, R = 50 Ω and C = 4 μF. What is the maximum energy stored in the circuit? Once the voltage is applied, how much time will pass before the stored energy is 10% of your answer to part (a)? (Note: The time constant applies to current, not energy.)arrow_forwardA circuit which employs a DIRECT CURRENT source has a branch which contains a capacitor. After the circuit has reached a steady state, what is the magnitude of the current in the circuit branch which contains the capacitor?arrow_forwardA) For the regulation circuit in Fig. below, if {Vz = 5 volt, R:=11 Q, (IL+I2)=0.2A & the unregulated input is Via =16 Volt}. Then, the value of the resistance Rin will be – 0 Lin Rin Unregulated Voltage (Vm) Regulated Voltage (Vz) RL Your answerarrow_forward
- A 120-V rms voltage is applied across a 6.0-µF capacitor and a series combination of a 100- resistor. If the frequency of the power source is 60 Hz, what is the rms value of the current in the circuit? 0.26 A 0.56 A 0.46 A 0.76 A O 0.36 Aarrow_forwardThe rms current through a light bulb is 0.653 A when the bulb is connected to a standard 120 V rms source. (a) Find the bulb's resistance.(b) Find the peak instantaneous current.(c) Find the peak instantaneous voltage.(d) Find the average electrical power used by the bulb.arrow_forward
arrow_back_ios
arrow_forward_ios
Recommended textbooks for you
- Physics for Scientists and Engineers, Technology ...PhysicsISBN:9781305116399Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningGlencoe Physics: Principles and Problems, Student...PhysicsISBN:9780078807213Author:Paul W. ZitzewitzPublisher:Glencoe/McGraw-Hill
Physics for Scientists and Engineers, Technology ...
Physics
ISBN:9781305116399
Author:Raymond A. Serway, John W. Jewett
Publisher:Cengage Learning
Glencoe Physics: Principles and Problems, Student...
Physics
ISBN:9780078807213
Author:Paul W. Zitzewitz
Publisher:Glencoe/McGraw-Hill
Introduction To Alternating Current; Author: Tutorials Point (India) Ltd;https://www.youtube.com/watch?v=0m142qAZZpE;License: Standard YouTube License, CC-BY