1. A 75 m high wind tower with a 50 m rotor diameter has been constructed in a region that follows the 1/7th rule for the coefficient of shear friction. The blades that have been selected for the turbine can reliably operate over a prolonged period of time if the maximum power ratio experienced during each blade rotation does not exceed 1.4. Are these blades suitable for this turbine? Justify your answer with numerical evidence (a calculation). 2. A 2.1 MW wind turbine system has a rotor diameter of 78 m and a rated speed of 12 m/s. What is the efficiency of the entire wind turbine system? Assume a density of 1.225 kg/m3 .

1. A 75 m high wind tower with a 50 m rotor diameter has been constructed in a region that follows the 1/7th rule for the coefficient of shear friction. The blades that have been selected for the turbine can reliably operate over a prolonged period of time if the maximum power ratio experienced during each blade rotation does not exceed 1.4. Are these blades suitable for this turbine? Justify your answer with numerical evidence (a calculation). 2. A 2.1 MW wind turbine system has a rotor diameter of 78 m and a rated speed of 12 m/s. What is the efficiency of the entire wind turbine system? Assume a density of 1.225 kg/m3 .

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

S Huid Mach RME601.pdf BI Answered: The external and inter X A bartleby.com/questions-and-answers/the-external-and-internal-diameters-of-the-inward-flow-reaction-turbine-60-cm-an E Apps O NPTEL : Mechanica.. Home O NPTEL : Mechanica.. O NPTEL : Mechanica... tcs TCS Recruitment: R... O NPTEL : Mechanica. = bartleby Q Search for textbooks, step-by-step explanations to homework questions,. Engineering / Mechanical Engineering / Q&A Library / The external and internal diameters of the inward flow reaction turbine 60 cm The external and internal diameters of the inward flow reaction Question The external and internal diameters of the inward flow reaction turbine 60 cm and 30 cm, the width of the inlet are 15 cm. The flow velocity through the runner is constant throughout and is equal to 1.5 m/s. Calculate discharge and the width at the outlet if 8% of the circumferential area is occupied by the blade thickness at both inlet and exit. Tagg Expert Answer Eng POn RME601.pdf QA.pdf PDF Type…
For a high-fl ow site with a head of 45 ft, it is desired to designa single 7-ft-diameter turbine that develops 4000 bhp at aspeed of 360 r/min and 88-percent effi ciency. It is decidedfi rst to test a geometrically similar model of diameter 1 ft,running at 1180 r/min. (a) What likely type of turbine is inthe prototype? What are the appropriate (b) head and(c) fl ow rate for the model test? (d ) Estimate the powerexpected to be delivered by the model turbine.
in MENGS95- Midterm Exam nid=12123 This course EHide blocks A radial flow machine has an impeller with inlet diameter D1= 0.03m, outlet diameter D2=0.06m, inlet blade angle B1=40°, outlet blade angle B2=40°, and N=900 rpm. The angle of attack at the inlet is 90° Neglect the effects of slip conditions and losses, and assuming the radial flow components of the absolute velocity are the same at the inlet and the outlet. Calculate the specific work of the machine in J/kg Choose... Is this machine a pump or a turbine? Choose... A centrifugal pump with the following impeller dimensions is used to pump oil. The pump is running at 2100 rpm.
A wind turbine with a 30-m rotor diameter is mounted with its hub at 50 m above a ground surface that is characterized by shrubs and hedges illustrated in Figure 2. Estimate the ratio of specific power in the wind at the lowest point that a rotor blade tip reaches to the highest point it rises to. Pe5 65 m 50 m 35 m Crops, hedges, shrubs Figure 2 Wind turbine Table 2 Friction coefficient for various terrain characteristics Friction Coefficient Terrain Characteristics Smooth hard ground, calm water Tall grass on level ground High crops, hedges and shrubs Wooded countryside, many trees 0.10 0.15 0.20 0.25 0.30 Small town with trees and shrubs Large city with tall buildings 0.40
Q2: A wind farm is proposed to be built outside of Baghdad Airport, The airport wind data obtained at a zref = 10 m., gave a Weibull wind frequency distribution fit with coemciens of k = 1.54 andc = 3.78 m/s. The wind turbines in the proposed wind farm have a rated power of Prated = 1.5 MW, a rotor radius of R = 35 m, and a hub height of H = 65 m. The rated wind speed for the wind turbines is Vrated = 8 m/s and the cut-out wind speed is Veutout = 20 m/s. Find the followings: (a) Based on the Weibull coefficients at zref= 10 m., determine the new Weibull coefficients for the wind speed at the wind turbine hub height. Assume n =0.23. (b) What is the probability for the wind at the hub height to be between Vrated and Veutoul? (c) Based on this, what is the expected Annual Energy Production (AEP) [MW-h], for one of the wind turbines in the wind farm? Q3:
Estimate the amount of power generated by a wind turbine having a powercoefficient of 0.37 given the annual average wind speed:Rotor diameter = 125 mCenter of rotor at an elevation 160 m above the surface level.Location: Oklahoma City, OK
Dresden, Germany has a population of 700,000 and a population density of2200 km-2 in the urban area. Assume that the electrical needs of Dresden are an average of1.0 kWe per capita and these are satisfied by a wind farm consisting of 100 m diameterthree-rotor wind turbines operating at optimal efficiency and with optimal spacing. If thewind velocity is constant at 7 m/s, what is the area of the wind farm? The optimal efficiency, η = 0.49 and The ideal spacing for a turbine is 300m by 1000 meters Sustainable energy, 2nd edition, Ch 10, Problem 17P
Q.3 A rocket nozzle has a throat area of 18 cn? and combustion chamber pressure of 25 bars. If the specific impulse is 130 seco ids and weight flow rate is 44.145 N/s. Determine: (i) Thrust Coefficient (ii) Propellant Weight Flow Coefficien (iii) Specific Propellant Consumption a d (iv) Characteristic Velocity
Please include explanation. A 6-MW offshore wind turbine has a capacity factor of 40%. It has a height of 120 m, and 107-m long blades. The angular acceleration is 1.388 rad/s2. Assume that the distance from the center of the turbine to the connection with the blade is negligible, and that the turbine starts from rest. At ? = 12 s, calculate the velocity and the acceleration for points (a) at half the length and (b) at the tip of the blade.
Find the size of a wind turbine rotor (diameter in m) that will generate 100kW of electrical power in a steady wind (hub height) of 7.5 m/s. Assume that the air density is 1.225 kg/m3, Cp = 16/27 and n = 1. %3D
A 15 in. diameter fan operates at 1600 rpm and develops a head of 6 in. of water anddelivers 120 cfm. What volumetric capacity for geometrically similar fan will develop 6 in ofwater at 1300 rpm?
tenjeratures: Evuporator islet water ta, °C FO 15 10 15 CondenseI inici watei ibs C Continue iterations untii all variabies change by an absolute value less than 0.1 percent during an iteration. Ans.: For fa= 10°C and th= 25°C, te= 2.84°C, tc = 34.05°C, qe = 134.39 kW and P = 28.34 kW. %3D