Foundations of Materials Science and Engineering
Foundations of Materials Science and Engineering
6th Edition
ISBN: 9781259696558
Author: SMITH
Publisher: MCG
bartleby

Concept explainers

bartleby

Videos

Question
Book Icon
Chapter 5.7, Problem 33SEP
To determine

The flux of Mn atoms between the surface and plane 2mm deep.

Expert Solution & Answer
Check Mark

Answer to Problem 33SEP

The flux of Mn atoms between the surface and plane 2mm deep is 6.8625×105atoms/m2s.

Explanation of Solution

Write the formula for lattice constant (a) of unit of FCC iron.

  a=4R2        (I)

Here, the radius of the iron atom is R.

Write the formula for volume (V) of the unit cell.

  V=a3        (II)

Write the formula for Fick’s law of diffusion.

  J=DdCdx        (III)

Here, flux or flow of atoms is J in atomsm2s, constant of diffusivity is D in m2s , and concentration gradient is dCdx in atomsm4.

Conclusion:

Refer Table 3.2, “Selected metals that have the BCC crystal structure at room temperature (20°C) and their lattice constants and atomic radii”.

The atomic radius of iron is 0.124nm.

Substitute 0.124nm for R in Equation (I).

  a=4(0.124nm)2=0.351nm

Substitute 0.351nm for a in Equation (II).

  V=(0.351nm)3=(0.351nm×109m1nm)3=4.32×1024m3

The number of atoms per unit volume is expressed as follows.

  atoms per unit volume=no. of atoms in FCC crystalvolumeof unit cell(V)=4atoms4.32×1024m3=9.25×1028atoms/m3

The concentration of atoms at the surface Cs is 0.6a%.

  Cs=0.6a%=0.6100(9.25×1028atoms/m3)=5.55×1026atoms/m3

The concentration of atom at the distance of 2mm below the surface C2mm is 0.1a%.

  C2mm=0.1a%=0.1100(9.25×1028atoms/m3)=9.25×1025atoms/m3

Refer Table 5.2, “Diffusivities at 500°C and 1000°C for selected solute-solvent diffusion systems”.

The diffusivity of manganese in FCC iron at 500°C is 3×1024m2/s.

Here,

  dC=C2mmCs=(9.25×1025atoms/m3)(5.55×1026atoms/m3)=4.575×1026atoms/m3

Substitute 3×1024m2/s for D, 4.575×1026atoms/m3 for dC, and 2mm for dx in Equation (III).

  J=(3×1024m2/s)4.575×1026atoms/m32mm=(3×1024m2/s)4.575×1026atoms/m32mm×1m1000m=6.8625×105atoms/m2s

Thus, the flux of Mn atoms between the surface and plane 2mm deep is 6.8625×105atoms/m2s.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
A mechanism for hardening steel is called carburization. To achieve this process, the piece of steel is exposed to an atmosphere rich in hydrocarbon such as methane (CH4). Consider a steel with a carbide concentration of 0.25wt%, which must be treated at 950˚C. If the carbon concentration at the surface is suddenly increased to 1.20wt%, how long does it take for a penetration of 0.5mm from the surface to reach a concentration of 0.80wt%? . The diffusion coefficient for carbon in iron at this temperature is 1.6 x 10-11 m2s-1. Assume that the piece of steel is semi-finite. Use the table below.
1. An FCC iron-carbon alloy initially containing 0.20 wt% C is carburized at an elevated temperature and in an atmosphere that gives a surface carbon concentration constant at 1.0 wt%. If after 49.5 h, the concentration of carbon is 0.35 wt% at a position 4.0 mm below the surface, determine the temperature at which the treatment was carried out.   2. Consider a metal single-crystal oriented such that the normal to the slip plane and the slip direction are at angles of 60° and 35°, respectively, with the tensile axis. If the critical resolved shear stress is 20.7 MPa, will an applied stress of 45 MPa cause the single crystal to yield? If not, what stress will be necessary?
An FCC iron–carbon alloy initially containing 0.25 wt% C is exposed to an oxygen-rich and carbon-free atmosphere at 1400 K. Under these circumstances the carbon diffuses from the alloy and reacts at the surface with the oxygen in the atmosphere; that is, the carbon concentration at the surface position is maintained essentially at 0 wt% C. (This process of carbon depletion is termed decarburization.) At what position (x, in mm) will the carbon concentration 0.10 wt% after a 8-h treatment? The value of D at 1400 K is 6.9 x10-11 m2/s. Round your answer to 2 decimal place.

Chapter 5 Solutions

Foundations of Materials Science and Engineering

Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Introduction to Diffusion in Solids; Author: Engineering and Design Solutions;https://www.youtube.com/watch?v=K_1QmKJvNjc;License: Standard youtube license